THE GALLEY IWS-4-S-WA Ideal Workstation 4S Owner’s Manual

THE GALLEY IWS-4-S-WA Ideal Workstation 4S

Specifications

• IWS-4-S-WA
  • Material: American Black Walnut
• IWS-4-S-GT
  • Material: Graphite Wood Composite
• IWS-4-S-BA
  • Material: Natural Golden Bamboo
• IWS-4-S-GR
  • Material: Exclusive Gray Resin*
• IWS-4-S-WH
  • Material: Designer White Resin*

Basin (KSO-4-S-SS)

• Material: 16GA 316L stainless steel indoor/outdoor
• SilentArmorTM sound reduction technology
• Angel finish
• Three tier design
• StarTM groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified
• cUPCTM certified

Culinary Tools included (CKT-12)

• (1) Upper Deck Section 12 x 19 UD-12-I-xx
• (1) Upper Tier Drying Rack 12 1/4 x 18 DR-12-U-xx
• (1) Upper Tier Cutting Board 12 1/4 x 18 CB-12-U-xx
• (2) Lower Tier Platforms 12 1/4 x 17 P1-12-L-xx
• (1) SS Colander 11 7.2-qt C1-11-0-ST
• (1) SS Mixing Bowl 11 7.2-qt B1-11-0-ST

Product Usage Instructions

Installation

1. Ensure that the countertop cutout is the correct size: 44 1/2 x 18 inches.
2. Place the sink into the cutout and secure it in place.
3. Connect the plumbing to the sink’s drain.

Cleaning and Maintenance

• Regularly clean the sink with a mild detergent and warm water.
• Avoid using abrasive cleaners or scrub brushes that can scratch the sink’s surface.
• To maintain the sink’s finish, use a stainless steel cleaner and polish.

Frequently Asked Questions (FAQ)

1. Q: What is the maximum cabinet size for this sink?
   A: The minimum cabinet size for this sink is 48 inches or 120cm.

2. Q: Can I install a garbage disposal with this sink?
   A: Yes, this sink is compatible with a garbage disposal. You can use the disposal strainer G-DRN-MSS.

3. Q: Can I customize the Galley with additional accessories?
   A: Yes, you can customize your Galley by adding accessories such as the Upper Deck Section, Upper Tier Drying Rack, Upper Tier Cutting Board, Lower Tier Platforms, SS Colander, and SS Mixing Bowl.

4. Q: How do I clean and protect the wood materials?
   A: To clean and protect the wood materials, use the Wood Condition + Protect 9 oz product (CIT-09-WD-C) and the Wood Finishing Balm 4 oz product (CIT-04-WD-B).

Ideal Workstation® 4S

SPECIFICATIONS

• IWS-4-S-WA
  • THE-GALLEY-LOGO
• IWS-4-S-GT
  • Graphite Wood Composite
• IWS-4-S-BA
  • Natural Golden Bamboo
• IWS-4-S-GR
  • Exclusive Gray Resin
• IWS-4-S-WH
  • Designer White Resin

Culinary Tools included (CKT-12)

1. (1) Upper Deck Section† 12” x 19” UD-12-I-xx
2. (1) Upper Tier Drying Rack 12 1/4” x 18” DR-12-U-xx
3. (1) Upper Tier Cutting Board 12 1/4” x 18” CB-12-U-xx
4. (2) Lower Tier Platforms 12 1/4” x 17” P1-12-L-xx
5. (1) SS Colander 11″ 7.2-qt C1-11-0-ST
6. (1) SS Mixing Bowl 11″ 7.2-qt B1-11-0-ST

Upper Deck

Cover set UD-4-2P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin

(1) 12” Included in CKT
Sections Walnut, Graphite, Bamboo, Gray or White Resin

Specifications

• Single bowl
• Users : 1
• Culinary Tools included : Five
• Galley Tap recommended : One
• Outside dimensions: 45 1/2” x 19 1/2” x 10 5/16”
• Interior dimensions: 44” x 17” x 10”
• Countertop cutout: 44 1/2” x 18”
• Basin area : 44” x 16″
• Minimum cabinet size : 48” or 120cm

Basin (KSO-4-S-SS)

• 16GA 316L stainless steel indoor/outdoor SilentArmor™ sound reduction technology Angel finish
• Three tier design
• Star™ groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified cUPC™ certified

Customize Your Galley

• Add 7-12” length
• Add 1-6” length
• Add 18″ DryDock
• Add 12″ DryDock
• Apron front
• 9” depth
• Center drain
• ThinTop™
• WorkTop™
• Color coded labels available

Recommended Basin Accessories & citrine

Bottom Grate set BG-4-S-2-SS Stainless Steel

11 1/2” 31 1/2”

•  Strainer M-DRN-MSS
  • Angel Finish 304 Stainless Steel
• Disposal Strainer G-DRN-MSS
  • Angel Finish 304 Stainless Steel

Auto Strainer Angel Finish 304 Stainless Steel with Polished or Matte knob

• A-DRN-PSS
• A-DRN-MSS
• A-DRN-MSS shown

CIT-09-SS-C

• Stainless Steel
• Clean + Polish 9 oz
• CIT-09-WD-C
  • Wood Condition
  • + Protect 9 oz
• CIT-04-WD-B
  • Wood Finishing
  • Balm 4 oz

Tap Hole Specifications

SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 3/8”

1. Galley Tap 1 3/8” min to 1 1/2″ max hole diameter
2. Center Tap hole diameters 2” behind cutout
   Note: Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap Note: Tap Placements are for right hand or left hand drain orientation
   Call 800.375.4255 or email [email protected] for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

• STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08
• WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN
• WAIVED AT THE TIME THE ORDER IS ACCEPTED.
• DWG and DXF templates available on our website:
  • TheGalley.com/specification-library
• Questions? For additional assistance, please contact
  • The Galley’s Customer Care Department at 800.375.4255

SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 3/8”

1.  Galley Tap 1 3/8” min to 1 1/2″ max hole diameter
2. Center Tap hole diameters 2” behind cutout
   Note: Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap Note: Tap Placements are for right hand or left hand drain orientation
   Call 800.375.4255 or email [email protected] for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

• STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08
• WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN
• WAIVED AT THE TIME THE ORDER IS ACCEPTED.
• DWG and DXF templates available on our website:
  • TheGalley.com/specification-library
• Questions? For additional assistance, please contact
  • The Galley’s Customer Care Department at 800.375.4255

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>