THE GALLEY IWA 4S Series DryDock 18 in stock Instruction Manual

THE GALLEY IWA 4S Series DryDock 18 in stock

Specifications

• Model: IWA-4-S-DD-18-S-WA
• Material: American Black Walnut / Graphite Resin+
• Single Bowl
• Users: 1
• Wash Tools included: Four
• DryDock Tool included: One
• Galley Tap recommended: One
• Outside dimensions: 63 1/2 x 19 1/2 x 2 1/16
• Interior dimensions: 62 x 17 x 2
• Countertop cutout: 62 1/2 x 18
• Minimum cabinet size: 66 or 165cm
• Minimum clearance required for DryDock below countertop: 2
• DryDock location: Drain side (S)
• Basin (KSO-4-S-DS-18-S-SS)
• Material: 16GA 316L stainless steel
• Indoor/outdoor
• SilentArmorTM sound reduction technology
• Angel finish
• Three-tier design
• StarTM groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified
• cUPCTM certified
• Graphite Wood Composite / Graphite Resin+
• Natural Golden Bamboo / Exclusive Gray Resin+
• Exclusive Gray Resin* / Resin+
• Designer White Resin* / Resin+
• Wash Tools included (WKT-4T)
• Customize Your Galley
• Add 7-12 length
• Add 1-6 length
• Add 18 DryDock
• Add 12 DryDock
• Apron front
• 9 depth
• Center drain
• ThinTopTM
• WorkTopTM
• *Color coded labels available
• DryDock Tool included (DR-18)
• (1) Upper Tier Drying Rack 9 1/4 x 18 DR-09-U-xx
• (1) Lower Tier Wash Caddy 6 x 17 WC-06-L-xx
• (1) Lower Tier Wash Bowl 12 x 17 WB-12-L-xx
• (1) Upper Tier Utensil Caddy 6 x 18 UC-06-U-xx
• (1) Dual Tier Drying Rack 18 x 17 DR-18-D-xx
• Cover set UD-4-18-3P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin
• 24
• 24
• 18
• Sections Walnut, Graphite, Bamboo, Gray or White Resin
• Bottom Grate set BG-4-S-2-SS Stainless Steel
• CIT-09-SS-C Stainless Steel Clean + Polish 9 oz
• 11 1/2 31 1/2
• Strainer M-DRN-MSS Angel Finish 304 Stainless Steel
• Disposal Strainer G-DRN-MSS Angel Finish 304 Stainless Steel
• CIT-09-WD-C Wood Condition + Protect 9 oz
• UD-24-I
• UD-18-I
• UD-12-I
• UD-06-I
• Auto Strainer Angel Finish 304 Stainless Steel with Polished or Matte knob
• A-DRN-PSS A-DRN-MSS
• A-DRN-MSS shown
• CIT-04-WD-B Wood Finishing Balm 4 oz
• 1 1/4 (32 mm)
• 1 1/4 (32 mm)
• SPECIFICATIONS | Right Hand Drain Orientation
• Tap Hole Specifications
• 22 1/4
• Outside Dimension 63 1/2 Cutout Dimension 62 1/2
• 40 1/4
• 8 Cutout Dimension 18 Outside Dimension 19 1/2
• Inside Dimension 17
• 8
• Inside Dimension 44
• Inside Dimension 18
• 3/4 (19 mm)
• 3/4 (19 mm)

SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 3/8 T Galley Tap 1 3/8 min to 1 1/2 max hole diameter Center Tap hole diameters 2 behind cutout

Note : Galley Hot & Cold Tap requires a minimum 8 clearance to center if installed to the right of the Galley Tap

Note : Tap Placements are for right hand or left hand drain orientation

• Call 800.375.4255 or email customercare@thegalley.com for additional guidance on Tap and Tap Accessory placements Countertop Cutout Plan

Important Installation

Note : DryDock requires 2 minimum clearance below countertop

• C.O. 62 1/2 (1588 mm)
• 1/4 (6 mm) REVEAL LEFT AND RIGHT
• I.D. 44 (1118 mm)
• 2 1/8 (54 mm) O.D. I.D. 18 (457 mm)
• 1 5/8 (41 mm)
• 48 (1219 mm)
• (CABINET LENGTH)

CABINETS ARE TYPICALLY CUSTOM MADE FOR GALLEY DIMENSIONS. FOR EXISTING CABINETS, TRIM INTERIOR BULKHEADS APPROX. 11 (280 mm) TO CLEAR SINK DEPTH.

Product Usage Instructions

Installation:
To install the product, follow these steps:

1. Ensure that the minimum cabinet size is 66 inches or 165cm.
2. Create a countertop cutout with dimensions 62 1/2 x 18 inches.
3. Make sure there is a minimum clearance of 2 inches below the countertop for the DryDock.
4. Place the DryDock on the drain side (S) of the sink.

Product Customization:
The product can be customized in the following ways:

• Add additional length (7-12 inches or 1-6 inches).
• Add an 18-inch or 12-inch DryDock.
• Add an apron front.
• Change the depth to 9 inches.
• Choose a center drain or a ThinTopTM WorkTopTM.

Maintenance:
To maintain the product, follow these guidelines:

• Use stainless steel cleaner and polish (CIT-09-SS-C) to clean and polish the sink.
• Use wood conditioner and protectant (CIT-09-WD-C) to maintain the wood components.
• Apply wood finishing balm (CIT-04-WD-B) for additional protection and shine.

FAQ:

• What is the warranty for the product?
• The product comes with a Limited Lifetime Warranty.
• Are the Galley Taps included with the sink?
• No, the Galley Tap is not included. It is recommended to purchase one separately.
• Can the product be used indoors and outdoors?
• Yes, the product is suitable for both indoor and outdoor use.
• Is the product made in the USA?
• Yes, the product is proudly made in the USA.

Models

Specifications

• Single Bowl
• Users: 1
• Wash Tools included: Four
• DryDock Tool included: One
• Galley Tap recommended: One
• Outside dimensions: 63 1/2” x 19 1/2” x 2 1/16”
• Interior dimensions: 62” x 17” x 2”
• Countertop cutout: 62 1/2” x 18”
• Minimum cabinet size: 66” or 165cm Minimum clearance required for DryDock below countertop: 2”
• DryDock location: Drain side (S)

Basin (KSO-4-S-DS-18-S-SS)

• 16GA 316L stainless steel indoor/outdoor
• SilentArmor™ sound reduction technology
• Angel finish
• Three tier design
• Star™ groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified cUPC™ certified

Customize Your Galley

• Add 7-12” length
• Add 1-6” length
• Add 18″ DryDock
• Add 12″ DryDock
• Apron front
• 9” depth
• Center drain
• ThinTop™
• WorkTop™
• *Color-coded labels available

Wash Tools included (WKT-4T)

DryDock Tool included (DR-18)

Upper Deck

Cover set UD-4-18-3P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin

Sections Walnut, Graphite, Bamboo, Gray or White Resin

Recommended Basin Accessories & citrine

Tap Hole Specifications

SUGGESTED GALLEY TAP PLACEMENT GUIDE
Suggested maximum inside corner radius of countertop cutout 3/8” Galley Tap 1 3/8” min to 1 1/2″ max hole diameter

Note : Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap

Note : Tap Placements are for right-hand or left-hand drain orientation

Call 800.375.4255 or email customerservice@thegalley.com for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08 WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER IS ACCEPTED.

DWG and DXF templates are available on our website:  TheGalley.com /specification-library

Questions?
For additional assistance, please contact The Galley’s Customer Care Department at 800.375.4255

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>