OZtrail 630522 Fast Frame Cabin 6 Person Tent Owner’s Manual
- June 11, 2024
- OZtrail
Table of Contents
OZtrail 630522 Fast Frame Cabin 6 Person Tent Owner's Manual
BEFORE YOU BEGIN
- This tent requires a minimum of two people to set up
- Read all the instructions before setting up your tent.
- Check parts list to ensure you have full contents
- Find a Flat area for your tent, free from rocks, potholes and branches
- Ensure that you use all pegs, ropes and additional poles only as instructed
- If conditions are windy, arrange tent as to have narrowest side of tent facing into the wind
- Keep away from Open Flames, DO NOT USE Stoves or Burning Appliances inside the tent
WARNING
-
AVOID CONTACT WITH OPEN FLAMES :
This tent is manufactured to meet CPAl-84 Fire Retardant standards. The fabric may burn if in continuous contact with open flame sources. -
CONDENSATION IS NOT LEAKING :
Minimize condensation by ensuring your tent is well ventilated through windows, doors or vents.
CONTENTS
Inner Tent x 1
Rain Fly x 1
DuraPlus Rain Fly Vestibule Pole x 1
Steel Portico Poles x 2
Steel Awning Poles x 2
Pegs x 31
Guy Ropes x 14
STORAGE
- To maximize the life of your tent, always ensure it is clean of dirt and debris.
- Never store if wet or damp. Consider airing your tent at home after your trip and allow to completely dry before storing between trips
- Continued exposure to sunlight can degrade the polyesters used to make tents. Always store your tent in its storage bag, away from direct light in a cool, dry space
SPARE PARTS AND ASSISTANCE – For details see www.oztrail.com.au
WARRANTY – For details see www.oztrail.com.au/warranty
OZtrail ® is a registered trademark of Adventure Trading Australia Pty Ltd
Designed & Imported by:
Adventure Trading Australia Pty Ltd
71 Charles Ulm Place,
Eagle Farm, QLD 4009
AUSTRALIA
Made in Bangladesh
PITCHING INSTRUCTIONS
STEP 1: LAYOUT THE INNER TENT
Unfold the inner tent and outstretch over a flat, clear area
Arrange the door so it is facing your desired area for entry & exit
Fold leg poles away from the center of the tent, so the roof framing stands up
STEP 2: ERECT THE INNER TENT FRAME
Locate roof poles and lift upwards from base, to the horizontal position.
The leg poles will angle at joints and partially stand up
STEP 3: SET UP VESTIBULE
Place Vestibule pole through sleeve located at the front of the inner tent
Insert Vestibule pole into black plastic molding
Insert Steel Portico Pole into opposite side of black molding
Connect base of Portico Pole to ring and pin on Grey Webbing stitched to Inner
tent corner
Attach plastic clips to tent poles on vestibule
STEP 4: PUT ON FLY AND SECURE TO INNER TENT
Place rain fly over the inner tent with vestibule facing the front
Secure rain fly to tent with Velcro tabs located on underside of rain fly
Connect the fly to the tent using the buckles on tent corners
STEP 5: ASSEMBLE THE AWNINGS
Use the awning poles and additional ropes to suspend the door panel overhead
Peg out the tent and fly around the perimeter
STEP 6: ALWAYS PEG OUT AND USE GUY ROPES
In windy and rainy conditions, awnings must be dismantled, and doors must be closed, and guy ropes must be set out
PACK UP :
TO TAKE DOWN THE TENT, REVERSE THE PREVIOUS STEPS
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>