GE 82063LO StayBright 3 Marker White Lantern Christmas Pathway Markers Instructions

GE 82063LO StayBright 3 Marker White Lantern Christmas Pathway Markers

Product Information

• Product Name: NHL Model No. 82063LO
• Manufacturer: Nicolas Holiday Ltd.
• Address: 246 Spring Hill Road, Unit B, Trumbull CT 06611
• Rated Voltage: 3.5VDC
• Rated Wattage of Complete Light Set: 0.6W
• Maximum Wattage of Power Adaptor: 7.2 watts
• UL Listed for Outdoor Use
• Direct Plug-In Transformer
• Input: 120VAC~60HZ 0.06A
• Output: 3.5V 0.45A

Product Usage Instructions

1. Read and follow all safety instructions provided in the user manual.
2. Ensure that the installation work and electrical wiring are done by qualified person(s) in accordance with applicable codes and standards.
3. Avoid using extension cords.
4. Refer to the National Electrical Code, ANSI/NFPA 70, for proper installation of wiring and clearances from power and lighting conductors.
5. Avoid installing or using the product within 10 feet of a pool or in a bathroom.
6. If using the product outdoors, install it only to a covered Class A GFCI protected receptacle that is weatherproof. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover. If a suitable receptacle is not available, contact a qualified electrician for proper installation.
7. Mount the unit at a height greater than 1 foot from the ground surface to minimize the risk of electric shock.
8. Save the user manual for future reference.
   If you have any questions or need further assistance, please call customer service toll-free at 1-877-398-7337 or visit us on the web at www.geholidaylighting.com.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be practiced including the following:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Read and follow all instructions that are on the product or provided with the product.
3. Do not use an extension cord.
4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and clearances from power and lighting conductors.
5. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
6. Do not install or use within 10 feet of a pool.
7. Do not use in a bathroom.
8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover.
9. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician.
10. WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
    SAVE THESE INSTRUCTUINS-This manual contains important safety and operating instructions for power units.

FCC NOTE

• Caution: Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
• “This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation

• Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

For Further Detail
Questions,call customer service toll-free at 1-877-398-7337 or visti us on the web at www.geholidaylighting.com

PRODUCT SPECIFICATION

• Rated Voltage: 3.5VDC
• Rated watt of complete light set : 0.6W
• The maximum wattage of power adaptor is 7.2 watts
• Input: 120VAC~60HZ 0.06A
• Output: 3.5V  0.45A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>