Feniex Quad Front Interior Lightbar Instruction Manual
- June 13, 2024
- Feniex
Table of Contents
Feniex Quad Front Interior Lightbar
Product Information
The Quad Front Interior Lightbar is a product manufactured by Feniex Industries, Inc. It is designed to provide efficient lighting for vehicles. The lightbar comes with a warranty of 5 years from the manufacturing date, and Feniex Industries providesservice for all products even after the expiration of the warranty. The lightbar has the following specifications:
- Current Draw: 6 Amps
- Input Voltage: 10-18 V DC
- Dimensions: 1 x 2.25 x 37.5
- Cable Length: 10′
Product Usage Instructions
Before installing the Quad Front Interior Lightbar, it isrecommended to watch the instructional video series called Feniex University, which provides an in- depth look at the lightbar and its accessories. The video series can be accessed at feniexuniversity.com.
Warning: Utilizing non-factory screws and mounting brackets may result in loss of warranty coverage.
Equipment Dimensions
The dimensions of the equipment are as follows:
- Length: 37.5 inches
- Width: 2.25 inches
Wiring Instructions without Converter
To install the wiring without the Quad Converter, please follow the
instructions provided on pages 6-8 of the user manual.
Wiring Diagram
The wiring diagram for the Quad Front Interior Lightbar is as follows:
| Wire | Function |
|---|---|
| Red | 12V+ |
| Black | Ground |
| White | Data Wire A* |
| Green | Data Wire B* |
| Blue | Color Select |
| Orange | Pattern Select |
| Brown | Mode 1 |
| Gray | Mode 2 Takedown/Flood |
| Violet | Left Arrow |
| Blue/White | Right Arrow |
| Orange/White | Dim 10% |
| Brown/White | Cruise Mode |
| Green/White | Color Change (Passenger) |
Adjusting the Vehicle Specific Brackets
To ensure proper installation and prevent unnecessary flashback, follow
these steps to adjust the vehicle specific brackets:
- Mount the interior lightbar to the visor bracket in your vehicle.
- The front of the base should be flush with the windshield.
SYSTEM SPECIFICATIONS
| Current Draw | 6 Amps |
|---|---|
| Input Voltage | 10-18 V DC |
Dimensions
Warranty
Cable Length
| 1″ x 2.25″ x 37.5″
5 years
10′
EQUIPMENT DIMENSIONS
Feniex University
Before installing the Quad Lightstick, watch ourinstructional video series,
Feniex University. Get an in-depth look at the Quad Lightsticks, Quad
Converter and much more.
WIRING WITHOUT CONVERTER
Follow the instructions on pages 6-8 to install wiring without the Quad Converter.
WIRING DIAGRAM
Wire and Function:
| Red | 12V+ |
|---|---|
| Black | Ground |
| White | Data Wire A* |
| Green | Data Wire B* |
Blue
Orange
| Color Select
Pattern Select
Brown
Gray Yellow
| Mode 1
Mode 2 Takedown/Flood
Violet| Left Arrow
Blue/White| Right Arrow
Orange/White| Dim 10%
Brown/White| Cruise Mode
Green/White| Color Change
(Passenger)
The white and green data wires are used for the Quad Converter or the Feniex One Controller/Relay. Follow the instructions on pages 6-8 for Quad Converter
ADJUSTING THE VEHICLE SPECIFIC BRACKETS
The vehicle specific brackets for the interior lightbars if not fitted correctly, can cause unnecessary flashback.
- Mount the interior lightbar to the visor bracket in your vehicle. The front of the base should be flush with the windshield.
- If the interior lightbar sags or has a flashback, remove the lightbar and follow step 2.
- To ensure a more secure fit, bend your mounting bracket between 5-10 degrees to prevent sagging or flashback.
- Lift the brackets until the front of the base it touching the windshield.
WIRING DIAGRAM
Wire and Function:
| White | Data Wire A |
|---|---|
| Green | Data Wire B |
SPECIFICATIONS
Warranty
Voltage
| 5 years
10-18 Volts DC
---|---
Current Draw| 6 Amps
PATTERNS
| 1 | Attack |
|---|---|
| 2 | Cluster |
| 3 | Cluster Mix |
| 4 | Combo Single |
| 5 | Combo Triple |
| 6 | Vehicle Park |
| 7 | Half-Half Single |
| 8 | Half-Half Triple |
| 9 | 1-1 Single |
| 10 | 1-1 Triple |
| 11 | 2-2 Single |
| 12 | 2-2 Triple |
| 13 | All-on Single |
| 14 | All-on Triple |
| 15 | End + Corner |
| 1 | Front Mode 1 |
|---|---|
| 2 | Front Mode 2 |
| 3 | Front Mode 3 |
| 4 | Passenger Color Change |
| 5 | Rear Mode 1 x |
| 6 | Rear Mode 2 x |
| 7 | Rear Mode 3 x |
| 8 | Driver Color Change |
| 9 | Driver Cut x |
| 10 | Passenger Cut x |
| 11 | Front Cut |
| 12 | Rear Cut x |
| 13 | Left Arrow x |
| 14 | Right Arrow x |
| 15 | Left Signal |
| --- | --- |
| 16 | Right Signal |
| 17 | Tail x |
| 18 | Brake x |
| 19 | Front Flood |
| 20 | Rear Flood x |
| 21 | Alley Right Flood x |
| 22 | Alley Left Flood x |
| 23 | California Red |
| 24 | Cruise Left |
| 25 | Cruise Right |
| 26 | Dim 10% |
| 27 | Dim 50% |
| 28 | Arrow Position |
SWITCHING FROM FRONT TO REAR ACTIVATION
- Power the Quad® product with power
- Within 5 seconds activate Front Mode 1 [#1] and hold Arrow Position [#28] until the orientation changes.
STANDARD FRONT: QUAD CONVERTER
REAR MODE: QUAD CONVERTER
SAFETY REGULATIONS & WARRANTY
Safety Regulations
The following provides all the information necessary to safely operate the
previously listed products of Feniex Industries, Inc. Please read this manual
thoroughly before installing or operating your new product in order to prevent
any damage or injury. Failure to follow the listed instructions in this manual
may result in damage to your products or personal injury.
- Proper installation of this product requires good knowledge of automotive systems, electronics and
- Please guarantee all vital components of the vehicle are not in danger of being damaged by drilling holes necessary for installation. Check all sides of the mounting surface before drilling any holes into the vehicle.
- Do not install this product in any way that interferes with the deployment of the air Doing so may damage the effectiveness of the air bag and can lead to serious personal and vehicle injury. The installer will assume full responsibility of proper installation of the new unit.
- Please clean the mounting surface before installation of the unit when using tape, brackets, magnet, Velcro or suction
- The product’s ground wire must be connected directly to the Negative (-) battery post for effective use of the Please follow all wiring guidelines provided to guarantee long lifespan and productivity. Failing to follow these instructions may result in damage to the product.
Warranty
Feniex Industries’ speakers, sirens, rocker panels, AM600 Beacons, Torch
Lights, AI lightbars, AI Cubes, AM900 Work Lights and controllers are
warrantied for 2 years from the manufacturing date. In addition, all other
products are warranted for 5 years from the manufacturing date. If a warranty
problem occurs, please contact customer support at 1.800.615.8350 or visit the
web site at www.Feniex.com. If the product needs to
be returned for repair or replacement, call our customer support line to
receive a return merchandise authorization number. Operational times are from
10 a.m. to 5 p.m. central time, Monday through Friday. Please do not send in
product without contacting support first for an RMA number.
Service After Expiration
Feniex Industries will still provide service for all products after
expiration of the warranty. For any issues, call the customer support line. In
some instances it may be necessary for the product to be shipped, freight
prepaid and insured for loss or damage to Feniex headquarters.
Warning! Utilizing non-factory screws and mounting brackets may result in loss of warranty coverage.
Copyright
This instruction manual and the Feniex products described in this
instruction manual may include or describe copyrighted Feniex material. Laws
in the United States and other countries preserve for Feniex Industries and
its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative
works of the copyrighted material. Accordingly, any copyrighted material of
Feniex and its licensors contained herein or in the Feniex products described
in this instruction manual may not be copied, reproduced, distributed, merged
or modified in any manner without the express written permission of Feniex
Industries, Inc.
Feniex Product Copyrights
The products described in this document are the property of Feniex
Industries, Inc. It is furnished by express license agreement only and may be
used only in accordance with the terms of such an agreement. Products and
documentation are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the product or documentation may be reproduced,
transmitted, transcribed, stored in retrieval system or translated into any
language or computer language, in any form or by any means, without prior
permission from Feniex Industries, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>