THE GALLEY IWA 4S Series DryDock 12 in Stock Instruction Manual

THE GALLEY IWA 4S Series DryDock 12 in Stock

Product Information

Specifications

• Model: IWA-4-S-DD-12-S-WA
• Material: American Black Walnut / Graphite Resin+
• Single Bowl
• Users: 1
• Wash Tools included: Four
• DryDock Tool included: One
• Galley Tap recommended: One
• Outside dimensions: 57 1/2 x 19 1/2 x 2 1/16
• Interior dimensions: 56 x 17 x 2
• Countertop cutout: 56 1/2 x 18
• Minimum cabinet size: 60 or 150cm
• Minimum clearance required for DryDock below countertop: 2
• DryDock location: Drain side (S)

Basin (KSO-4-S-DS-12-S-SS)

• Material: 16GA 316L stainless steel indoor/outdoor
• SilentArmorTM sound reduction technology
• Angel finish
• Three tier design
• StarTM groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified
• cUPCTM certified

Additional Options

• Graphite Wood Composite / Graphite Resin+
• Natural Golden Bamboo / Exclusive Gray Resin+
• Exclusive Gray Resin* / Resin+
• Designer White Resin* / Resin+

Wash Tools included (WKT-4T)

Customize Your Galley:

• Add 7-12 length
• Add 1-6 length
• Add 18 DryDock
• Add 12 DryDock
• Apron front
• 9 depth
• Center drain
• ThinTopTM WorkTopTM
• *Color coded labels available

DryDock Tool included (DR-12)

• (1) Upper Tier Drying Rack 9 1/4 x 18 DR-09-U-xx
• (1) Lower Tier Wash Caddy 6 x 17 WC-06-L-xx
• (1) Lower Tier Wash Bowl 12 x 17 WB-12-L-xx
• (1) Upper Tier Utensil Caddy 6 x 18 UC-06-U-xx
• (1) Lower Tier Drying Rack 12 1/4 x 17 DR-12-L-xx
• Cover set UD-4-12-3P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin

Accessories

• Bottom Grate set BG-4-S-2-SS Stainless Steel
• CIT-09-SS-C Stainless Steel Clean + Polish 9 oz
• Strainer M-DRN-MSS Angel Finish 304 Stainless Steel
• Disposal Strainer G-DRN-MSS Angel Finish 304 Stainless Steel
• CIT-09-WD-C Wood Condition + Protect 9 oz
• UD-24-I
• UD-12-I
• Auto Strainer Angel Finish 304 Stainless Steel with Polished or Matte knob
• A-DRN-PSS A-DRN-MSS
• CIT-04-WD-B Wood Finishing Balm 4 oz

Tap Hole Specifications

• Suggested maximum inside corner radius of countertop cutout: 3/8 T
• Galley Tap: 1 3/8 min to 1 1/2 max hole diameter
• Center Tap hole diameters: 2 behind cutout

Note : Galley Hot & Cold Tap requires a minimum 8 clearance to center if installed to the right of the Galley Tap.

Note : Tap Placements are for right hand or left hand drain orientation.

Call 800.375.4255 or email customercare@thegalley.com for additional guidance on Tap and Tap Accessory placements.

Countertop Cutout Plan
Important Installation Note: DryDock requires 2 minimum clearance below countertop.

• C.O. 56 1/2 (1435 mm)
• 1/4 (6 mm) REVEAL LEFT AND RIGHT
• 1 5/8 (41 mm)
• I.D. 44 (1118 mm)
• 2 1/8 (54 mm) O.D.
• I.D. 12 (305 mm)
• 48 (1219 mm) (CABINET LENGTH)

CABINETS ARE TYPICALLY CUSTOM-MADE FOR GALLEY DIMENSIONS. FOR EXISTING CABINETS, TRIM INTERIOR BULKHEADS APPROX. 11 (280 mm) TO CLEAR SINK DEPTH.

Product Usage Instructions

Installation

1. Ensure you have the correct cabinet size of 60 or 150cm to fit the product.
2. Make sure there is a minimum clearance of 2 inches below the countertop for the DryDock tool.
3. Follow the provided Countertop Cutout Plan to create the necessary cutout for the product.
4. If using a Galley Tap, refer to the Tap Hole Specifications for proper placement.
5. For existing cabinets, trim interior bulkheads approximately 11 inches to clear sink depth.

Product Care

For cleaning and maintenance, please follow these instructions:

1. Use the Stainless Steel Clean + Polish product (CIT-09-SS-C) to clean the stainless steel components.
2. Apply Wood Condition + Protect product (CIT-09-WD-C) to maintain the wood components.
3. For finishing the wood, use the Wood Finishing Balm  (CIT-04-WD-B).

Frequently Asked Questions

• 1. What is the recommended cabinet size for this product?
• The recommended cabinet size for this product is either 60 or 150cm.
• 2. Can the DryDock tool be installed below any countertop?
• No, the DryDock tool requires a minimum clearance of 2 inches below the countertop.
• 3. How do I clean the stainless steel components?
• Use the Stainless Steel Clean + Polish product (CIT-09-SS-C) to clean the stainless steel components.
• 4. How do I maintain the wood components?
• Apply the Wood Condition + Protect product (CIT-09-WD-C) to maintain the wood components.
• 5. How do I finish the wood?
• Use the Wood Finishing Balm (CIT-04-WD-B) to finish the wood.

Models

Specifications

• Single bowl
• Users: 1
• Wash Tools included: Four
• DryDock Tool included: One
• Galley Tap recommended: One
• Outside dimensions: 57 1/2” x 19 1/2” x 2 1/16”
• Interior dimensions: 56” x 17” x 2”
• Countertop cutout: 56 1/2” x 18”
• Minimum cabinet size: 60” or 150cm
• Minimum clearance required for DryDock below countertop: 2”
• DryDock location: Drain side (S)

Basin (KSO-30-S-DS-12-S-SS)

• 16GA 316L stainless steel indoor/outdoor
• SilentArmor™ sound reduction technology
• Angel finish
• Three tier design
• Star™ groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified cUPC™ certified

Customize Your Galley

• Add 7-12” length
• Add 1-6” length
• Add 18″ DryDock
• Add 12″ DryDock
• Apron front
• 9” depth
• Center drain
• ThinTop™
• WorkTop™
• *Color-coded labels available

Wash Tools included (WKT-4T)

DryDock Tool included (DR-12)

Upper Deck

Cover set UD-4-12-3P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin

Sections Walnut, Graphite, Bamboo, Gray or White Resin

Recommended Basin Accessories & citrine

Tap Hole Specifications

SUGGESTED GALLEY TAP PLACEMENT GUIDE

Suggested maximum inside corner radius of countertop cutout 3/8” Galley Tap 1 3/8” min to 1 1/2″ max hole diameter

Note : Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap

Note : Tap Placements are for right-hand or left-hand drain orientation

Call 800.375.4255 or email customerservice@thegalley.com for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08 WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER IS ACCEPTED.

DWG and DXF templates are available on our website:  TheGalley.com /specification-library

Questions?
For additional assistance, please contact The Galley’s Customer Care Department at 800.375.4255

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>