PROJECT E BEAUTY PE730 LED Light Therapy Mask User Manual

PROJECT E BEAUTY PE730 LED Light Therapy Mask User Manual

Indications for Use

The Project E Beauty LED Light Therapy Mask is an over the counter device that is indicated for the treatment of full face wrinkles and mild to moderate acne.

Recommendation of Use

Please read the complete instruction manual before using the Project E Beauty LED Light Therapy Mask (Model: PE730). It will give you a better understanding of the device, and you’ll enjoy it.

• Contraindications
• Do not use if your skin is especially sensitive to light, such as systemic lupus erythematosus porphyria, polymorphic light eruption, and solar urticaria.
• Do not use if you have a history of light triggered seizures, especially if you have photosensitive epilepsy, as the pattern of bright light could induce
• Do not use if you are undergoing radiation or chemotherapy
• Do not use if you have skin disorders such as rosacea, pustular acne or abraded
• Do not use on abnormal skin conditions caused by diabetes or other systemic, immunological or metabolic
• Do not use if your facial skin has been treated with aphysician-prescribed drug within the past 6 months, please consult with your physician before use.
• Do not use if you take medications that increase your sensitivity to sunlight, such as certain antibiotics (phenothiazine, thiazide, diuretics, sulfonyluraes, sulfonamides, DTIC, uorouracil, vinblastine, griseofulvin), anti-in ammatories (NSAIDS), Alpha-Hydroxy Acids(AHAs), Beta-Hydroxy Acids (BHAs), Retin-A, Accutane, topical retinoids, Azelaic acid or the herbal supplement John’s Wort.

Warnings

• This device emits visible red light, blue light and invisble infrared light which can cause damage to the Do not aim the device directly at your eyes.
• Do not use the device to treat skin which is painful to touch, raised (higher than surrounding skin) , open wounds or active infections, such as crusting or bleeding. This may be a sign of a more serious condition and should be checked by your doctor.
• Do Not place in, or drop into water or any other 4) Do Not use the device if it becomes damp or wet.
• Do Not attempt to open or repair your
• DO Not use the device when it is
• Do Not operate the device if it has a
• Use the device only for its intended use and as described in its
• Do not use this device if you are currently undergoing or underwent in the last 2 months, skin related procedures, cosmetic surgery or procedures for hair Please only use it after consultation with a specialist.
• Do not use if you have experienced a migraine in the last two
• Mode 2 of device is only for treatment of mild or moderate acne on the

Precautions

• Do not use the device on skin that is infected, burned or cut as this could cause discomfort or
• Do not use if you are The Applicator has not been tested for safety on pregnant women and the risks are unknown.
• Do not use while walking or
• Keep the device out of reach of
• The device to be used only for treatment of the face. Do not use on other parts of the
• If you feel di culty breathing, stop using the device immediately and consult with your
• Do not allow the device to touch any metallic objects during use or while
• Discontinue use if you encounter any discomfort or skin redness that lasts for more than two You may have sensitivity to light or another condition. Consult your health care provider.
• Keep away from ammable aerosol
• This device is for use by one person during the product’s lifetime and by persons 22 years of age or

Product Description

The Project E Beauty LED Light Therapy Mask is a facemask-shaped device designed for home-use, which uses Light Emitting Diodes to emit energy in the red, blue and infrared region of the spectrum. The Project E Beauty LED Light Therapy Mask has a total of 36 LEDs. The red light with wavelengths centered at 635-644nm and the infrared light with wavelengths centered at 845-855nm to treat wrinkles on the face. The blue light with wavelengths centered at 430-445nm and the red light with wavelengths centered at 635-644nm to treat mild to moderate acne on the face.

The Project E Beauty LED Light Therapy Mask components include the LED module, USB power cord, and integrated module. The user wears the device over the face, like a pair of glasses, and presses the Power button on the integrated module for 1 seconds to initiate the treatment. The device has a continuous working time of 12 minutes and power off automatically.

Components of the device:

1. Viewing Slot
2. Eye Shield
3. Nose Piece
4. Over-Ear Arms
5. LED module
6. Power button
7. Charging Indicator Light
8. USB Charging port
9. USB power cord

Note: The USB Charging port is only used for charging.

Components of the device:

Project E Beauty LED Light Therapy Mask Package lists:

• Main device “Project E Beauty LED Light Therapy Mask”
• USB power cord
• User manual

The function of the device Power ON/OFF:

Press the Power button (F) for 1 seconds to power on the device, you will see that the LED module (E) emits red lights.
Press the Power button (F) for seconds again to power o the device.

Treatment Mode:

The device has two treatment modes:
Mode 1: the device emits Red and Infrared lights to treat wrinkles on the face.
Mode 2: the device emits Blue and Red lights to treat mild to moderate acne on the face.
After the device is powered on, you can short press the Power button (F) to switch treatment mode between “Mode 1” and “Mode 2”.

LED module:

Light source is delivered to the skin through the LEDs. The device has a total of 36 LEDs.
When the device is working in Mode 1, 30 LEDs emit red lights, and 6 LEDs emit infrared lights.
When the device is working in Mode 2, 30 LEDs emit blue lights, and 6 LEDs emit red lights.

Charging:

The device can be recharged. Use the USB power cord to charge the device when the battery has low charge. Please refer to Section 4.2 for steps regarding how to recharge the battery.

Eye Safety:

Do not position the device so that light is directed from in front of the eyes. Do not look directly into the LEDs. Also do not shine the light source directly into the eyes of others.

Specification

humidity: ≤ 75% Atmospheric pressure: 700-1060hPa
Operating condition| Temperature: 5°C to 40°C/ 41°F to 104°F Relative humidity: 15%-75% Atmospheric pressure: 700-1060hPa
Lithium ion battery| 3.7V d.c. 1300mAh
Max. Charging time| 2 hours
Service Life| 5 Years
Risk Group| Risk group 2 according to IEC 62471:2006

Using Instructions

Check for these situations

Check whether the device is damaged before each use: Always Inspect your the device before each use. Look for cracks in the plastic, cuts, frays or exposed wires in the USB power cord. If it has a damaged USB power cord, if the device is cracked, if it is not working properly or if it appears damaged in any way. DO NOT use the device. Please contact us.

First use and preparation

• Remove the device and USB power cord from
• Before using the device for the rst time, fully charge the This may take up to 2 hours.
• To charge the device, insert on end of the USB power cord into the USB Charging port on the device and the other end into a standard 5V USB

(Refer to below Figure 1).

Note:

• The device can not be used while
• The USB Charging port is only used for

Battery status indicator:

Indicator Light Name| Indicator Light Color| Indicator Light Condition| Meaning
---|---|---|---
LED Module E| Blue| Blinking| Low battery

Charging Indicator Light (E)

| Blue| Constant| Battery is charging
Green| Constant| Battery is fully charged

**Light sensitivity test**

In order to determine if you have a Light Sensitivity Issue please follow the instructions below. It is recommended that you test a small, less sensitive area of skin (i.e., like your forearm).

1. Press the “Power” button to turn on the
2. Place the device on an area of the Leave in contact with your skin for a 3-minute treatment cycle.
3. Repeat by doing another 3-minute treatment on the same area of your arm.
4. Wait 24 hours. You should NOT experience any adverse reaction during the next 24 hours.

A bad reaction to light occurs if you have pain or discomfort in the treatment areas or any skin redness for more than two hours. It can be due to medication, supplements, or a possible skin issue. Please stop using the device immediately and consult with your doctor if you experience a bad reaction.

Working mode selection

Mode 1: The Mode 1 of the device is suitable for people who have wrinkles on the face, like the picture below.

Mode 2: The Mode 2 of the device is suitable for people who have mild to moderate acne on the face.
Use this chart to help determine if the Mode 2 is right for you.

• Instructions for use

Follow these steps to ensure proper operation during a treatment:

Clean the device surface with a soft wet cloth. Make sure your face is clean, dry and wiped free of any oil or cosmetics before using the device.

Wear the device as wearing eye glasses and adjust the position for a comfortable fit. Make sure that the eye shield completely covers your eyes for preventing LED lights from entering your eyes.
Note: Use the device after taking off your glasses.

__

Press and hold the Power button for 1 second on the left side of the temples to turn on the device.

The default setting of the mask is Mode 1 (Red Light + Infrared). Press again the Power button to select the desired mode for the mask.
Mode 1 (Red Light + Infrared): Penetrates the surface of your skin to reduce wrinkles.
Mode 2 (Blue Light + Red Light): Treats your skin by targeting bacteria that can cause acne.

Start your LED treatment. The LED light will automatically be turned o after 12 minutes.
*The light emitting surface temperature is less than 48°C during use

Do not look directly at the light emitted by the LEDs while the device is in operation. Excessive exposure to LED light can cause eye damage.
Note: It is recommended that you close your eyes as much as possible during treatment.
It’s recommended that you apply a small amount of moisturize cream or serum onto the treated area after each treatment.

You can purchase our Project E Beauty Serum at

www.projectebeauty.com

The treatment time Initial treatment course:

Mode 1 (Red Light + IR Light): 12 minutes daily for 60 Days. Mode 2 (Blue Light + Red Light): 12 minutes daily for 30 Days.

Maintenance regime:

After you have achieved your initial treatment, reduce the use of the device to 2 times per week for 12 minutes daily.

2. Maintenance

• Cleaning
• Be sure to unplug the device properly by holding the plug and removing it from the USB
• Clean the device surface with a clean soft cloth dampened with clean tap water or distilled water after each
• Immediately dry the surface with a clean dry soft cloth any time it comes into contact with moisture, chemicals, or
• Always keep the device Store the device in a clean and dry place.

Note:

• NEVER clean the device or any of its parts with running water and
• NEVER operate or charge the device if you suspect that water is inside the device or if water on any surface of the
• DO NOT open or dismantle the device, as there are no user serviceable parts
• Take care to not allow the device to be subjected to any pressure, other than only what is needed to use, charge, and clean the Excessive force may damage or weaken the bulb and other components.
• DO NOT use alcohol or volatile organic solvents (for example, paint thinner or nail polish remover) to clean the unit, as these substances can weaken and/or permanently damage the device’s
• Storage

Store the device and all its parts in a cool dry place.

Storage condition:

Temperature: -25°C to 45°C/-13°F to 113°F Relative humidity: ≤ 75%

Note:

• Do not place or store the device where it can fall or be pushed into a tub, sink or any other vessel containing
• KEEP the device away from heated

*Do not store in a lint or dusty area. Avoid direct sunlight. This may damage the device.

Disposal

Waste Electrical and Electronic Equipment (WEEE) This marking indicate that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Troubleshooting

In the event that your device fails to perform as expected, the following suggestions will help to identify potential issues with the device and its setup.

The unit does not operate normally

|

The on/off button was not pressed properly

| – Make sure that you have pressed the on/off button properly. Power button should be pressed and held for 2 seconds until the Mask powers on

The Mask was not charged properly

| – Charge the unit according to the instructions in this user manual

– Make sure that the mask has been fully charged before use. Check if the battery charging indicator light on the unit lights up to make sure the unit is charging

No Power

|

The battery is discharged

|

– Recharge the battery

– Connect the unit to a 5V USB port with the charger cable.

LED Lights on the mask flickers during session|

The Mask is out of power

| – Check that the mask is fully charged before use. If the problem persists, please contact us.
The charging indicator light does not light up when charging|

The charging indicator light malfunction

| – Check that the charger is connected properly. If the problem persists, please contact us.

Warranty

We offer 1 year free warranty for your Project E Beauty LED Light Therapy Mask.
The warranty does not include damage caused by misuse, accident, abuse, neglect or other external causes.
We need you to provide your name, email and order ID during warranty.

Scan the QR code or visit www.projectebeauty.com/pages/warranty

Customer Service

If your device is broken, damaged, in need of repair, or for any other user assistance, please contact Duplex International Trading Limited:
Email: sales@projectebeauty.com Tel: +1-626-759-4232

Electromagnetic compatibility

Important information regarding Electromagnetic Compatibility (EMC)

With the increased number of electronic devices such as PC and mobile (cellular) telephones, radio transceivers, mobile radio transmitters, radio- controlled toys, and so on, Medical devices in use may be susceptible to electromagnetic interference from other device.
Electromagnetic interference may result in incorrect operation of the medical devices and create a potentially unsafe situation. Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electromagnetic Compatibility) with the aim to prevent unsafe product situations, the IEC 60601-1-2 standard has been implemented. This standard defines the levels of immunity to electromagnetic interference as well as maximum levels of electromagnetic emissions for medical devices. This unit has been thoroughly tested and inspected to assure proper performance and operation! This product needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided, the following tables recommend minimum separation distances between portable and mobile RF communications equipment and Project E Beauty LED Light Therapy Mask.

Caution:

Using cell phone or microwave oven, HF surgical equipment, magnetic resonance imaging or other radio radiant equipment near this product may cause malfunction or lead to loss of essential performance.
The use of accessories and cables other than those specified by Duplex International Trading Limited as replacement parts for internal components, may result in increased emission or decreased immunity of the device.
This device should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, this device should be observed to verify normal operation in the configuration in which it will be used.
Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30cm (12 inches) to any part of the product, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
*Refer to further guidance below regarding the EMC environment in which the device should be used.
The USB power cord length of the device USB power cord: 0.5m

Guidance and manufacturer’s declaration – electromagnetic emission – for all EQUIPMENT AND SYSTEMS

1| Guidance and manufacturer´s declaration – electromagnetic emission
---|---

2

| The Project E Beauty LED Light Therapy Mask is intended for use in the electromagnetic environment specified below. The customer or the user of the Project E Beauty LED Light Therapy Mask should assure that it is used in such an environment.

3

| ****

Emission test

| ****

Compliance

| ****

Electromagnetic environment – guidance

4

| ****

RF emissions CISPR 11

| ****

Group 1

| The Project E Beauty LED Light Therapy Mask uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.
5| RF emission CISPR 11| Class B| ****

The Project E Beauty LED Light Therapy Mask is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes.

6

| Harmonic emissions IEC 6100-3-2| ****

Complies

7

| ****

Voltage fluctuations

/ flicker emissions IEC 61000-3-3

| ****

Complies

Guidance and manufacturer’s declaration – electromagnetic immunity – for all EQUIPMENT and SYSTEMS

Guidance and manufacturer’s declaration – electromagnetic immunity

The Project E Beauty LED Light Therapy Mask is intended for use in the electromagnetic environment specified below. The customer or the user of Project E Beauty LED Light Therapy Mask should assure that it is used in such an environment.
Emission test| IEC 60601 test| Compliance level| Electromagnetic environment – guidance

Electrostatic discharge (ESD) IEC 61000-4-2

| ****

± 8 kV contact

±2 kV, ±4 kV, ±8 kV,

±15 kV air

| ****

± 8 kV contact

±2 kV, ±4 kV, ±8 kV,

±15 kV air

| Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30%.
Electrical fast transient/burst IEC 61000-4-4| ± 2 kV for power supply lines| ± 2 kV for power supply lines| Mains power quality should be that of a typical commercial or hospital environment.
Surge

IEC 61000-4-5

| ± 0.5 kV, ± 1 kV

line(s) to line(s)

| ± 0.5 kV, ± 1 kV

line(s) to line(s)

| Mains power quality should be that of a typical commercial or hospital environment.
Voltage dips, short Interruptions and voltage variations on power supply input lines IEC 61000-4-11| 0 % UT ; 0.5 cycle At 0°, 45°, 90°, 135°,

180°, 225°, 270° and

315°

0 % UT; 1 cycle and 70

% UT; 25/30 cycles Single phase: at 0°

0 % UT; 250/300 cycle for 5s

| 0 % UT ; 0.5 cycle At 0°, 45°, 90°, 135°,

180°, 225°, 270° and

315°

0 % UT; 1 cycle and 70 % UT; 25/30 cycles Single phase: at 0°

0 % UT; 250/300

cycle for 5s

| Mains power quality should be that of a typical commercial or hospital environment. If the user of the Project E Beauty LED Light Therapy Mask requires continued operation during power mains interruptions, it is recommended that the Project E Beauty LED Light Therapy Mask be powered from an uninterruptible power supply or a battery.
Power frequency (50Hz/60Hz)

magnetic field IEC 61000-4-8

| ****

30A/m

| ****

30A/m

| Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment.
NOTE: UT is the a. c. mains voltage prior to application of the test level.

Guidance and manufacturer’s declaration – electromagnetic immunity – for EQUIPMENT and SYSTEM that are not

LIFE- SUPPORTING

Guidance and manufacturer´s declaration – electromagnetic immunity

The Project E Beauty LED Light Therapy Mask is intended for use in the electromagnetic environment specified below. The customer or the user of The Project E Beauty LED Light Therapy Mask should assure that it is used in such an environment.
Immunity test| IEC 60601 test level| Compliance level| Electromagnetic environment – guidance
Conducted RF| 3 V rms| 3 V rms| Portable and mobile RF communications equipment should be used no closer to any part of the Project E Beauty LED Light Therapy Mask, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter.

Recomme n ded separation distance

d = 1.2  _P   _150kHz to 80MHz

d = 1.2  P 80 MHz to 800 MHz

d = 2.3 P 800 MHz to 2.7 GHz Where P is the maximum output power rating of the transmitter in watts (W)

according to the transmitter manufacturer and d is the recommended separation distance in meters (m).

Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a should be less than the compliance level in each frequency range.b

Interference may occur in the vicinity of equipment marked with the following

symbol:

IEC 61000-4-6| 150 kHz to 80 MHz

6 V in ISM bands between 0.15MHz and 80 MHz

| 150 kHz to 80 MHz

6 V in ISM bands between 0.15MHz and 80 MHz

IEC 61000-4-6| 150 kHz to 80 MHz

6 V in ISM bands between 0.15MHz and 80 MHz

| 150 kHz to 80 MHz

6 V in ISM bands between 0.15MHz and 80 MHz

 |  |  |
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from structures, objects and people.

a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Project E Beauty LED Light Therapy Mask is used exceeds the applicable RF compliance level above, The Project E Beauty LED Light Therapy Mask should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the Project E Beauty LED Light Therapy Mask.

b Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 10V/m.

Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment

Test frequency (MHz)| Band a)

(MHz)

| Service a)| Modulation b)| Maximum power (MHz)| Distance

(m)

| Immunity Test Level (V/m)
---|---|---|---|---|---|---
385| 380 – 390| TETRA 400| Pulse modulation b)

18 Hz

| 1,8| 0,3| 27
450| 430 – 470| GMRS 460,

FRS 460

| FM c) ± 5 kHz deviation 1 kHz sine| 2| 0,3| 28
710|

704 – 787

| LTE Band 13,

17

| Pulse modulation b)

217 Hz

|

0,2

|

0,3

|

9

745
780
810|

800 – 960

| GSM 800/900, TETRA 800,

iDEN 820,

CDMA 850,

LTE Band 5

|

Pulse modulation b)

18 Hz

|

2

|

0,3

|

28

870
930
1 720|

1700 – 1990

| GSM 1800;

CDMA 1900;

GSM 1900; DECT; LTE Band 1, 3, 4,

25; UMTS

|

Pulse modulation b)

217 Hz

|

2

|

0,3

|

28

1 845

1 970

2 450

|

2400 – 2570

| Bluetooth, WLAN, 802.11

b/g/n, RFID 2450, LTE

Band 7

|

Pulse modulation b)

217 Hz

|

2

|

0,3

|

28

5 240|

5100 – 5800

| WLAN 802.11

a/n

| Pulse modulation b)

217 Hz

|

0,2

|

0,3

|

9

5 500
5 785
NOTE If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.
a) For some services, only the uplink frequencies are included.

b) The carrier shall be modulated using a 50 % duty cycle square wave signal.

c) As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not represent actual modulation, it would be the worst case.

Recommended separation distances between portable and mobile RF communications equipment and the EQUIPMENT or SYSTEM – for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances between portable and mobile RF communications equipment and the Project E Beauty LED Light Therapy Mask

The Project E Beauty LED Light Therapy Mask is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Project E Beauty LED Light Therapy Mask can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the Project E Beauty LED Light Therapy Mask as recommended below, according to the maximum output power of the communications equipment.

Rated maximum output power of transmitter

(W)

| ****

Separation distance according to frequency of transmitter (m)

150 KHz to 80 MHz

d = 1.2  P

| 80 MHz to 800 MHz

d = 1.2  P

| 800 MHz to 2.7 GHz

d = 2.3  P

0.01| 0.12| 0.12| 0.23
0.1| 0.38| 0.38| 0.73
1| 1.2| 1.2| 2.3
10| 3.8| 3.8| 7.3
100| 12| 12| 23
For transmitters with a maximum output power rating not listed above, the recommended separation distance d in meters (m) can be determined by using the equation applicable to the frequency of the transmitter where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer list.

Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

Labeling

Product Name: Project E Beauty LED Light Therapy Mask Model Number: PE730
INPUT: DC5V — 1A
Battery: 3.7V, 1300mAh, 4.81Wh
DISTRIBUTED BY: Duplex International Trading Limited
B1, 10/F, Block 2, Golden Dragon Ind Centre, 162-170 Tai Lin Pai Road, Kwai Chung, NT, Hong Kong
Zhongshan Kingdom Electrical Appliance Co LTD No. 32 Jinhong Road, Pingnan Industrial Park, Sanxiang Town, Zhongshan Guangdong, China

Note:

Read More About This Manual & Download PDF:

References

• Warranty Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>