OPT7 Aura Pro Aluminum Underglow for Car Truck RV Installation Guide

OPT7 Aura Pro Aluminum Underglow for Car Truck RV

COMPONENTS

• RIGID LIGHT BARS

• AURA BLUETOOTH CONTROL BOX
  

• Y-SPLITTERS
  

• HARDWIRE POWER HARNESS
  

• MOUNTING KIT
  INCLUDES –
  WIRE MOUNTS, SELF-TAPPING
  SCREWS, BOOSTER, VELCRO, ZIP TIES
  

INSTALLATION

STEP 1

Inspect kit to ensure all contents was included.

STEP 2

Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.

IMPORTANT
The control box must be installed inside the vehicle as it is not waterproof. Avoid installation areas of the engine bay + heated surfaces.

EXAMPLES

WARNING

1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMPs or less!!
2. Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.

HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE

Connect the Red line(+) of power hareness to the vehicle battery’s positive terminal. Connect the Black line (-) of power hareness to the vehicle battery’s negative terminal or an unpainted area on your vehicle’s frame.

WARNING

1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
2. Please ensure that the LED bars or strips/control box/wiring all are mounted WARNING in areas where will not exceed 85℃ or 185℉.

STEP 3

Scan the QR code on the back of the control box to download the app.

STEP 4

Secure Control box in desired location with Velcro or zipties.

• The control box is NOT waterproof. Tuck it away from the elements.
  

STEP 5

Secure the light bars using the zip ties to tie all the wiring away from the moving components.

IMPORTANT

The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL
TAPE around the LED connectors to ensure the longevity of the lighting kit.

STEP 6

Open the “OPT7 Connect” App, pair your smart phone to the control box, and pick your desired color!

AUX WIRING FOR A DOOR/DOME LIGHT

Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide

OPT7 CONNECT APP

• Colors
• Modes
• Door Assist
• Support
• Ability to control up to
• 4 devices at once

QR CODE TO DOWNLOAD

| |
---|---|---
|

Download the free “OPT7 CONNECT” App

• App iOS (12+) available on App Store
• Android (6 +) available on Google Play

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7
Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specied by OPT7
Lighting will void product warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>