Wi-Tek WI-PMS310GF Gigabit L2 Managed PoE Switch Installation Guide
- June 16, 2024
- Wi-Tek
Table of Contents
Quick Installation Guide
24V/48V Mix PoE Switch
WI-PMS310GF Gigabit L2 Managed PoE Switch
WI-PMS328GF-Alien
WI-PMS310GF-Alien
WI-PS310GF-Alien
Package Contents
WI-PMS328GF-Alien
WI-PMS310GF-Alien, WI-PS310GF-Alien
Appearance Overview
For WI-PMS328GF-Alien
- Front panel
- Back panel
-
LED indicator
LED IndicatorPWR Indicator| On: the device power on is normal
Off: the device is power off or failed
SYS Indicator| Blinking: device initialization
On: device on and normal operation
PoE port| Port 1-4: 24V Passive or 802.3 af/at
Port 5-8: 802.3bt 90W
Port 9-24: 802.3af/at
L ink/Act Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
Giga Indicator| On: The port negotiated rate is 1000 Mbps
Off: The port negotiated rate is not 1000 Mbps
SFP Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
Power Supply
Power Supply| AC 110~240V 50/60HZ
For WI-PMS310GF-Alien
- Front panel
- Back panel
-
LED indicator
LED IndicatorPWR Indicator| On: the device power on is normal
Off: the device is power off or failed
SYS Indicator| Blinking: device initialization
On: device on and normal operation
L ink/Act Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
G iga Indicator| On: The port negotiated rate is 1000 Mbps
Off: The port negotiated rate is not 1000 Mbps
SFP Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
Power Supply
Power Supply| DC 48-55V 5A Max or AC 110~240V 50/60HZ
For WI-PS310GF-Alien
- Front panel
- Back panel
-
LED indicator
LED IndicatorPWR Indicator| On: the device power on is normal
Off: the device is power off or failed
L ink/Act Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
PoE Indicator| On: data on TX/RX
Off: ports link down
SFP Indicator| Blinking: data on TX/RX
On: ports link up
Off: ports link down
Power Supply
Power Supply| DC 48-55V 5A Max or AC 110~240V 50/60HZ
D I P
VLAN| Default
Installation
-
Desktop installation
(WI-PMS328GF-Alien, WI-PMS310GF-Alien, WI-PS310GF-Alien) -
Rack mounted
(WI-PMS328GF-Alien)
Login WEB UI
For more L2 management functions, please login the Web-Based Ul as the
following steps:
Step 1. Find the lP address of the switch.
- The default login lP address of this series switch is 192.168.0.1, with a subnet mask of 255.255.255.0.
- lf the switch receives an lP address from a DHCP server in your network.You can find this lP address on the DHCP server.
Step 2. Configure the lP address on your PC to make sure the switch and PC are in the same subnet.
- lf the switch uses the static IP address of 192.168.0.1, configure your PC’ s lP address as192.168.0.x (” x ” ranges from 2 to 254), and subnet mask as 255.255.255.0.
- lf the switch uses an lP address assigned by a DHCP server, set your PC to obtain an IP address automatically from the DHCP server.
Step 3. Launch a web browser on your PC. Enter the lP address of the switch in the address bar and fill in the username and password.
- The default login username and password are both “admin”.
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damaged, warranty card losing will disqualify the product from limited warranty.
| |
---|---|---
http://support.wireless-tek.com/| http://www.wireless-tek.com/| <https
://app-gateway.wireless-tek.com/product-library/shareLink>
Wireless-Tek Technology Limited
Address: Biaofan Technology Building 402, Bao’an street, Baoan
District,Shenzhen City, Guangdong, China
Website: www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>