MEAN WELL HLG-120H series 120 Watt Constant Voltage Constant Current LED Driver Instruction Manual
- June 15, 2024
- MEAN WELL
Table of Contents
MEAN WELL HLG-120H series 120 Watt Constant Voltage Constant Current LED
Driver
Specifications
- Model: HLG-120H-12
- Output: DC Voltage
- Constant Current Region: 6 ~ 12V
- Rated Current: 10A
- Rated Power: 120W
- Ripple & Noise (max.): 150mVp-p
- Voltage Adjustment Range: Adjustable for A/AB-Type only (via built-in potentiometer) 10.8 ~ 13.5V
- Current Adjustment Range: Adjustable for A/AB-Type only (via built-in potentiometer) 5 ~ 10A
- Line Regulation: 200mVp-p
- Load Regulation: 36V, 18 ~ 36V, 3.4A, 122.4W
- Setup, Rise Time: 1200ms,50ms/115VAC; 500ms,50ms/230VAC
- Hold Up Time (Typ.): 12ms / 115VAC, 230VAC
- Voltage Range: 90 ~ 305VAC, 127 ~ 431VDC
- Frequency Range: 47 ~ 63Hz
- Power Factor (Typ.): PF0.98/115VAC, PF0.95/230VAC, PF0.93/277VAC @ full load
- Total Harmonic Distortion: THD<20% (@ load50% / 115VAC,230VAC; @ load75% / 277VAC)
- Efficiency (Typ.): 92%
- AC Current (Typ.): 1.4A / 115VAC, 0.6A / 230VAC, 0.55A / 277VAC
- Inrush Current (Typ.): COLD START 60A(twidth=375s measured at 50% Ipeak) at 230VAC; Per NEMA 410
- Max. No. of PSUs on 16A Circuit Breaker: 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
- Leakage Current: [Not specified]
Installation
To install the HLG-120H LED Driver, follow these steps:
- Ensure that the power source is turned off.
- Connect the input terminals of the LED Driver to the AC power source.
- Connect the output terminals of the LED Driver to the LED lighting system.
- Ensure all connections are secure.
120W Constant Voltage + Constant Current LED Driver
HLG-120H series
Features
- Constant Voltage + Constant Current mode output
- Metal housing with class design
- Built-in active PFC function
- IP67 / IP65 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
- Typical lifetime > 62000 hours
- 7 vears warrantv
Description
HLG- 120H series is a 120W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-120H operates from 90 ~ 305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 93.5%, with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection. The design of metal housing and IP67/1P65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-120H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Applications
- LED street lighting
- LED high-bay lighting
- Parking space lighting
- LED fishing lamp
- LED greenhouse lighting
- Type “HL” for use in Class I , Division 2 hazardous (Classified) location.
GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx
Model Encoding
SPECIFICATION
NOTE
- All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25°C of ambient temperature.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
- Tolerance: includes set up tolerance, line regulation and load regulation.
- Please refer to “DRIVING METHODS OF LED MODULE”.
- De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
- Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
- The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-quality EMC Directive on the complete installation again.
- To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.
- This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tC point (or TMP, per DLC), is about 75°C or less.
- Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
- The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
- For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf * Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
References
Read User Manual Online (PDF format)
Loading......