Kellogg s 1772 Frosted Flakes DIY Bracelet Kit Instructions

June 17, 2024
Kellogg s

Kellogg s 1772 Frosted Flakes DIY Bracelet Kit

Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-product

Package Contact

Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig-
\(1\)

BEFORE YOU BEGIN

Read fully through to the end of the instructions before beginning the projects.

WHAT YOU WILL NEED

  • Scissors
  • Adhesive tape
  • Craft glue
  • Clear nail polish

DISSOLVABLE POUCHES

  1. Fill the cereal bowl with warm water.
  2. Submerge the pouch in warm water until dissolved. Use the spoon if needed.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(3\).
  3. Remove the polybags from the water and rinse before opening.
  4. Tear open the polybags to reveal the contents.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(5\)

BEADED CHAIN BRACELET

  1. Insert the clear elastic cord through the first link. Make a double knot to attach the clear elastic cord to the chain bracelet.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(6\)
  2. Secure the knot by covering it with a drop of craft glue or clear nail polish. Allow 5 minutes to dry, then cut off the excess length of cord after the knot.
  3. Weave the clear elastic cord through the chain links, adding one bead on each link.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(8\)
  4. Repeat steps 2 and 3 to finish the chain bracelet.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(9\)

BEAD BRACELET

  1. Measure and cut 30 cm (12 in) of clear elastic cord.

  2. Attach the cord to your working surface with a piece of adhesive tape.

  3. Thread the beads onto the cord following the sequence shown.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- 15 TIP
    Avoid soaking the bracelets in water.

  4. Make a jeweller’s knot. To make a jeweller’s knot, start by making a simple knot and add a second loop. Pass the elastic through the second loop two more times to create a double wrap.

  5. Secure the knot by covering it with a drop of craft glue or clear nail polish. Allow 5 minutes to dry, then cut off the excess length of cord after the knot.

  6. Repeat steps 1 to 5 to make 2 more beaded bracelets following the patterns below.Kellogg-s-1772-Frosted-Flakes-DIY-Bracelet-Kit-fig- \(14\)

TIP
Before wearing the bracelets, gently pull on them to make sure they are well secured!

WARNING!

  • CHOKING HAZARD – small parts. Not suitable for children under 3 years.
  • STRANGULATION HAZARD – Functional long cord – Adult supervision required.
  • Caution: Do not place the bowl over the lace. This is not good. Do not eat or drink liquid after dissolving the pouch. Do not place pouch in mouth or near eyes or nose. Wash hands after use. Discard liquid immediately.

MAKE IT REAL

  • 1700 Reisterstown Rd Ste 211 Pikesville, MD 21208 USA 410-995-8685 Jactin House, 24 Hood Street Ancoats, Manchester, M4 6WX UK
  • +44 (0) 161 302 4100
  • makeitrealplay.com.

© 2023 MAKE IT REAL, LLC.

Made In China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals