kogan KA5PRTBLNDA Portable USB Blender User Guide

: June 1, 2024
: Kogan

Table of Contents

USER GUIDE
PORTABLE USB BLENDER
Documents / Resources

USER GUIDE

PORTABLE USB BLENDER

KA5PRTBLNDA

SAFETY & WARNINGS

Read all instructions carefully before using this product. Retain this user guide for future reference.
During operation, it is strictly forbidden to open the cup.
During operation, it is strictly forbidden to touch any moving parts such as blades and motors, to avoid injury or damage to the product.
Only open the cup once the blades stop moving.
It is strictly forbidden to disassemble or modify this product by oneself.
Ensure care is taken when handling the cutting blades, emptying the bowl and during cleaning.
Before charging, ensure the charging interface is completely dry and clean. After charging, when disconnecting the plug, grasp the plug and gently pull it out. Never pull from the wire.
Do not place in or near flammable gases or electric stoves or in hot ovens.
Do not immerse the power adapter or motor in water or other liquids to avoid the risk of fire, electric leakage or personal injury.
This appliance can be use by persons with reduced physical, sensory and mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of appliance in a safe way and if they understand hazards involved.
Always disconnect the blender from the power supply if it is left unattended and before assembling, disassembling.
The appliance shall be not use by children. Keep the appliance and its cord out of reach of children.
In the absence of supervision, the cleaning and maintenance work should not be done by the child.
Use of accessories not recommended or sold by the Kogan.com may cause risks of fire, electric leakage or personal injury.
Hot water above 40°C should not be added to the cup to avoid personal injury caused by spillage.
Do not fill the bowl above the maximum fill line (or rated capacity) to avoid risk of injury due to damage to the cover or bowl.
If the power cord is damaged, cease use immediately and contact help.Kogan.com for support. It must be replaced by the Kogan.com or its service agent or a similarly qualified person to avoid a hazard.
The appliance is only to be used with the power supply unit provided with the appliance.
The battery must be removed from the appliance before it is disposed of.
The appliance must be disconnected from the power supply before removing the battery.
Ensure the battery is disposed of in accordance with your local environmental authority.
This equipment must only be used in accordance with the instructions and must not be used for any other purposes.
Never attempt to shield the safety interlock of the lid.
Certainly! Here’s a revised version of the warning notes with improved English grammar:

Precautions:

Do not submerge the base in water.
Avoid placing overheated ingredients or liquids (above 40°C) in the cup to prevent bursting, splashing, and scalding.
This product contains lithium-ion batteries. Unauthorized disassembly of the product shell is strictly prohibited to avoid potential damage to the core or other hazards.
Strictly avoid disassembling, squeezing, puncturing, or short-circuiting the product. Do not expose it to water or fire in environments with temperatures exceeding 55°C.

Attention:

During the product’s operation, refrain from opening the cup to avoid disrupting normal operation.
This product is designed for home use only and should not be used for other purposes.
Adhere strictly to the rated working time during blending; each session is set to 40 seconds, with a minimum interval of 3 minutes to allow the motor to cool before the next use.
Stirring ingredients prone to foam, such as bananas, may cause the product to stall.
After use, promptly clean the product and the parts in contact with food with clean water. Exercise caution when cleaning the cup and parts, paying attention to the sharp knife edge to prevent cuts (wearing protective gloves is recommended).
Avoid placing the product in high-temperature, strong magnetic fields, or environments with flammable and explosive gases (such as natural gas or methane) to prevent accidents such as abnormal operation or fire.
Do not place any parts of this product in a dishwasher, microwave oven, disinfection cabinet, or water exceeding 40°C or use other equipment to heat them, as it may cause deformation or damage.

Battery Information:

Store and use this product in an environment between 0-40°C.
If not used for an extended period, charge the battery every 3 months to prevent damage.
Charging speed may be slower in environments below 10°C, which is normal.
Charge the battery promptly when the power is low.
When discarding the product and its packaging, recycle it through the relevant qualified department. Cut off the power cord before disposal.

Disposal

This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

OVERVIEW

Lid
Cup band
Cup
Power button
Charging port
Base

BEFORE FIRST USE

Before using this product for the first time, use soapy water to clean the cup and the blade on the base and dry thoroughly.
The base should be wiped with a damp cloth and should not be immersed in water.
Ensure that the battery is fully charged and thoroughly clean the parts that meet the food. This product has double safety protection.
If the base is placed separately, or if the cup is not rotated and installed, pressing the button switch will not activate the product, and the red indicator light will blink five times.
The product will only function when the base and the cup are properly rotated and fixed in place. To start the blender, double-click the “key switch,” and the working status indicator will turn red.

Note: Ensure that the cup is tightly secured to the host to activate the product.

OPERATION

Charging

When the power adapter is connected, the LED will flash red while charging.
When the battery is fully charged, the LED will turn solid red.

Using the Blender

To turn on the blender, double-click the power button. The indicator light will turn red.
When the battery is running low, the indicator will flash red 5 times, and the blender will stop running. If the indicator begins flashing during operation, it indicates the battery is running low.
In the event of a stall during operation, the blender will stop immediately, and the indicator will flash red 3 times. While the indicator is flashing, pressing the power button switch will be invalid in order to protect the blender from damage.
To stop the blender during operation, press the power button.
When the battery is fully charged, the blender can operate continuously for 10 cycles (each lasting 40 seconds). It is recommended to take a break after 5 consecutive cycles.

Preparing Ingredients

1. Ensure hard ingredients such as carrots apples and pears are washed, peeled and de-cored and cut into small squares approximately 1cm in size.

2. Place the cut fruit into the cup, add water, milk and other liquids. The total amount of food and liquid should not exceed the maximum mark (300ml) of the cup (120g grams of fruit,180g of water).

3. Screw the base onto the cup securely to ensure that ingredients and liquids will not leak out during operation.

4. Rotate the blender so the base is facing downwards. Double-click the power button, the blender will start.

Note: During operation, press the power button to stop blending. If the blade gets stuck, pause blending and turn the blender upside down and then back upright. Resume

5. After mixing, place the cup upside down and carefully unscrew the base. You can now drink directly from the cup.

6. Use a DC5V 1A power adapter to charge the blender.

Note: This product cannot be operated while it is charging.

Note
To avoid damaging or possible malfunctions, ensure you use power adapter rated to DC5V 1A and above to charge the product.

CLEANING & CARE

Ensure that the blades have come to a complete stop before cleaning.
Avoid using steel wool, abrasive cleaners, or corrosive liquids (such as gasoline or acetone) to clean this product.
Wipe the base with a wrung wet cloth; do not rinse, soak, or spray water or other liquids to prevent damage to the device or product leakage.
Rinse the inside of the cup and the parts that come into contact with food with clean water. Wipe them dry or allow them to air dry. Exercise caution to prevent cuts (protective gloves can be worn).
When storing, ensure that the product is clean and dry, and place it in a dry, ventilated area away from direct sunlight.
For a quick clean, add an appropriate amount of water to the cup and attach it to the main machine. Double-click the power button and run the blender for 5 to 10 seconds.

TROUBLESHOOTING

Problem	Possible cause	Solution
Product won’t start	• Has it used continuously for a long time?

• Are the ingredients stuck to the blade?
• Is the base and the cup properly in place?| • Allow the motor to cool down before using.
• Remove the ingredients and try again.
• Install the base and cup in place before trying again.
• Fully charge before use.
During operation, the blade is stuck and the indicator flashes| • Ingredients are too large causing the blade to get stuck.
• Ingredients exceed the maximum mark on the cup.| • Ensure ingredients are cut into 1cm cubes and peels and cores have been removed.
• Reduce the amount of ingredients in the cup.
Motor is emitting a burning smell| Continuous use has exceeded 5 cycles.| Allow the motor to cool down before resuming operation.

NOTES

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com