beper 40.500 Anti Cellulite Massager Instruction Manual
- June 15, 2024
- beper
Table of Contents
ANTI-CELLULITE MASSAGER
40.500 Anti Cellulite Massager
For further information and/or for instructions for use in other languages , please visit: beper.com
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenance and help you avoid mishaps
and possible accidents. Remove the packing and make sure that the appliance is
intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing material in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label. The appliance can be damaged if the
voltage is not correct. If the plug does not suit the socket, let it be
replaced with another suitable plug by qualified personnel only, which shall
also ensure that the section of the socket cables is suitable for your
appliance power absorption. Generally, the use adaptors multiple plugs and/or
extensions is not recommended; should they be necessary, please use only
simple or multiple adaptors and extensions in compliance with the safety rules
in force, making sure that the capacity absorption limit marked on the simple
adaptors and the extensions and the maximum power limit marked on the multiple
adaptor are not exceeded. Do not use the appliance if the cable or the plug
shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open.
Refer to an authorized Beper after-sale service for repair and require
original spare parts only. Failing to follow these instructions may impair the
safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from impro- per, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or
burning flames.
Do not allow children, disabled people or every people without experience or
technical ability to use the appliance if they are not properly watched over.
Close supervision is necessary when any appliance used by or nearchildren.
Warnings
Read this manual carefully, it contains important instructions for a safe
installation, use and maintenance of the appliance. This unit can be used by
children aged 8 and above and individuals with reduced physical, sensory or
mental capacity, or lack of experience or knowledge, if they are provided with
adequate supervision or have received instructions regarding the use of safety
equipment and that they understand the risks related.
Cleaning and maintenance should not be carried out by children without
supervision. If the power cable gets damaged, it has to be replaced only at a
service center approved by the manufacturer.
In the presence of medical conditions, such as phlebitis, varicose veins, skin
excoriations or other issues, consult your doctor for frequency and duration
of applications, as well as possible contraindications.
Expectant mothers, people who suffer from diabetes and people who carry
pacemakers must consult their doctor before using this appliance. Individuals
insensible to heat must be careful when using the appliance.
Do not use the massager for more than 15 minutes. Before making a new cycle of
massages, allow the appliance to cool down. Do not massage the same body area
for more than 5 minutes. After removing the packaging, check the appliance for
any signs of damage. In case of visible damage, do not use it and contact a
qualified technician. If the plug and socket are not compatible, the socket
has to be replaced with a suitable type by a qualified technician. When not in
use, disconnect the appliance from the power supply and make sure that it is
switched off.
Never touch the appliance with wet or humid hands.
Do not leave the appliance exposed to weathering (rain, sunlight)
Do not drop or hit the appliance.
In case of a breakdown or malfunctioning of the appliance, disconnect it at
once.Do not attempt to repair it, but take it to a service center approved by
the manufacturer.
The appliance is not designed for medical purposes.
Exercise extreme care when using the massager on your neck and back area.
Always make sure to updo your hair before massaging the neck and back area, to
prevent the movement of the heads from accidentally trapping some strands of
hair, causing them to tear.
Description Fig.A
- Main unit
- Power/massage/massage + IR switch
- Adjustable massage intensity controller
- Infrared light
- Massage head adaptor
- Cord
- Finger massage head
- Spiky roller massage head
- Ball massage head
- Wavy surface massage head
- Protective cloth head
Tips for use
Self-massage is best done in the morning because the body is rested and more
receptive. During the evening, especially after a long day spent sitting down
or on your feet, legs are already congested and additional stress may increase
the inflammatory state, so it is best to apply only cream with a light massage
at this time of day.
Massage the areas to be treated in small concentric circles. The friction
helps to improve local circulation. Move slowly and fluidly, starting from the
bottom up and without applying excessive pressure to the tissues.
Massaging the legs and feet is especially good for alleviating the sensation
of tiredness and heaviness and promoting a pleasant relaxed feeling.
Use instructions
Choose the desired accessory for the massage, mount it onto the hexagonal base
making sure that the appliance is both switched off and unplugged. Fig.B
Plug the appliance and place the switch to 1 position, to active the massage
only, or 2 to also activate the infrared light. Adjust the intensity of the
massage with the controller.
The accessories supplied can be used interchangeably. Check the diagram in
Fig. C and D to choose the speed and the right accessory for every body area
to be treated.
Use the cloth head if you are applying cream during the massage to prevent
dirtying the accessories. Mount it by turning it clockwise onto the base unit,
making sure that it is properly closed. Accessories 7 and 9 are known as
multinodes due to the various shaped protrusions. Using these, you can perform
a percussion massage of varying intensity. Applying greater pressure will
result in a deeper massage.
The roller accessory 8 is used to perform a vibration massage that works
against cellulite thanks to the up and down movement.
It also promotes good blood circulation. Accessory 10 is particularly ideal
for a more delicate and less intense friction massage.
It is recommended for alleviating muscular pain from cramps due to the mild,
relaxing action of the massage.
The infrared/heat function combined with vibration massage applies heat to the
skin which helps absorb the nutrients from the cosmetic products used.
Do not massage the same area for more than 5 minutes and do not run the
appliance for more than 15 minutes at a time. Before beginning a new session
of massages wait at least 15 minutes until the appliance cools down.
Cleaning and maintenance
Unplug the appliance before cleaning it.
Do not use solvents, detergents or abrasive products.
Use a dry cloth to clean the outer surface.
When the appliance is not in use, unplug it.
To prevent the cable from becoming damaged, do not twist it, pull it or wind
it around the appliance. If it is damaged, have replaced immediately by
qualified personnel.
Warning: do not immerse the appliance in water or other liquids.
Technical data
Power: 25W
Power supply: 230V~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed
of in the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the
materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance For any technical assistance, please contact directly the seller or
our head office in order to preserve the appliance’s efficiency and NOT TO
void the guarantee. Any intervention on this appliance by non-authorized
persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product Contact
your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward
your enquiries to your distributor.
YOU MIGHT ALSO LIKE
Rechargeable Percussion Massager
Cod.: P302MAS001
6 adjustable intensity levels
4 interchangeable massaging accessories
Long lasting lithium battery
Ergonomic and anti-slip handle
Low noise and light weight for easy use
CUSTOMER CARE BEPER
http://customercare.beper.com/support/home
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com