EZQuest X40028 USB-C Multimedia 8-in-1 Hub Instruction Manual
- June 9, 2024
- EZQuest
Table of Contents
Quick Instruction Manual for
USB-C Multimedia 8-in-1
Hub Part# X40028
X40028 USB-C Multimedia 8-in-1 Hub
Content:
- EZQuest 8-in-1 hub (Part No. X40028)
- Manual
Attention:
- If you like to use the HDMI port for your external display and you like to close your MacBook Pro display (Closed Clamshell Mode), you must have the USB-C power cable connected to the hub. (Closing your laptop screen without the USB-C power cable connected to the hub, will put your laptop in sleep mode).
- Please make sure that you select the correct HDMI port from your TV or your display INPUT so that your computer display can be shown.
- USB-A ports will not support Apple SuperDrive (We recommend using our X40100 USB-C to USB-A Female Mini Adapter to connect directly to your Mac)
- USB-C ports will not operate a monitor
- Please make sure your device’s USB-C port supports display output.
Specification:
- Part Number: X40028
- UPC Code: 694307400283
- 1 x HDMI 4K (60Hz on DP1.4 or 30Hz on DP1.2)
- 1 x USB-C 100W Power Delivery port version 3.0 with pass-thru charging up to 90W output and FRS technology or 5Gbs data
- 2 x USB-C Gen 2 (10Gbps) ports with BC1.2 each outputs 5V/1.54 (7.5W)
- 2 x USB-A 3.0 ports BC1.2 each outputs 5V/1.54 (7.5W)
- When using all the ports simultaneously, the total shared data is 5Gbps. When using all the ports simultaneously to power your devices, the total shared power is 10 Watts
- 1 x SDHC and 1 x Micro SDHC Card Reader
- Cable Length: 28 CM/11 Inches
- Dimension: 16mm x 43mm x 101mm – 0.6 x 1.7 x 4 inches
- Weight: 3 oz
- Power: To support full-speed charging for iPad Pro or other USB-C mobile devices, please make sure your power adapter is at least 15V (45W). Power adapters less than 45W will not supply enough power to provide pass through charging
- 18-Month Worry Free Warranty
Resolution Setting for Mac
(M1, M1 Pro/Max, M2 and Intel)
System Preferences > Displays
Resolution Setting for Windows
Right click desktop > Display Settings
Graphics Settings for Mac
- Mirror Display
System Preferences > Displays
- Extended Display
System Preferences > Displays
- Extended Display
Graphic Settings for Windows
-
Clone Mode
Right click desktop >Graphics Settings >Display
-
Extended Display
Right click desktop >Graphics Settings > Display
FAQ
A. Why is there no audio output from HDMI ?****
– Please make sure if there’s audio output on the Monitor.
– Please set the external monitor as default audio output device.
B. What if the WIFI drops when the hard drive has been connected to the hub ?****
– 2.4G is easily interfered, you can switch to 5G network, or try to move the hard drive to a suitable place.
C. What if the USB driver can’t be identified ?****
– Restart the device and connect the hub again.
D. What if the display screen drops after connecting a large current hard drive ?****
– Please supply power through power adapter.
How to Change the Resolution and Refresh Rate on Mac:
System Preferences, Click on Display, Under the Display:
While holding the Option button down, click on “ Scale “ twice then you can
see the range of resolution
Then click on the “ Show low resolution modes” box Then you can choose the
Refresh Rate available
Full Speed Charging Support:
To support full-speed charging for iPad Pro or other mobile devices, please
make sure your power adapter is at least 15V (45W).
Power adapter less than 45W will not supply enough power to provide pass
through charging.
Please email us with any questions or feedback about our products to:
[email protected]
1800-881-9305
STOP
If you have any issues with product please contact our technical support
team ToT: returning it.
TECHNICAL SUPPORT
Technical Support : 1 (800) 881 9305
1 (714) 666 1716 X2
Email: [email protected]
Service Hours: Mon-Fri 08:00 AM – 05:00 PM PST
Documents / Resources
|
EZQuest X40028 USB-C Multimedia 8-in-1
Hub
[pdf] Instruction Manual
X40028 USB-C Multimedia 8-in-1 Hub, X40028, USB-C Multimedia 8-in-1 Hub,
Multimedia 8-in-1 Hub, Hub
---|---