babymoov A055020 Swoon Evolution Remote Controlled Baby Swing Instructions
- June 10, 2024
- babymoov
Table of Contents
Swoon Evolution
Réfs : A055020 – A055020_UK
Instructions for use
A055020 Swoon Evolution Remote Controlled Baby Swing
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING
-
Never leave the child unattended.
-
Do not use this product once your child can sit up unaided or weighs more than 9 kg.
-
This product is not intended for prolonged periods of sleeping
-
Never use this product on an elevated surface (e.g. a table).
-
Always use the restraint system.
-
To avoid injury ensure that children are kept away when unfolding and folding this product.
-
Do not let children play with this product.
-
Do not move or lift this product with the baby inside it.
-
The infant swing shall ony be used with the recommended transformer.
-
It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
-
Never use the toy bar to carry the reclined cradle.
-
This reclined cradle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
-
Do not use any other type of adapter, as this could damage the swing and result in injury.
-
IMPORTANT: before any operation make sure your cradle swing is switched off. The cradle swing can work off the mains by means of the supplied adapter.
-
Insert the adapter plug in the socket designed for the purpose and the other end in the mains socket.
-
Power supply units used with the swing for children should be monitored regularly in order to detect damage to the wire, the socket, the box and other parts. Do not use the power supply unit if damaged.
-
The non-rechargeable batteries must not be recharged, or else they may explode or leak.
-
Different sorts of batteries must not be mixed, nor new batteries mixed with used ones.
-
Respect the polarity of the batteries on insertion.
-
Exhausted batteries are to be removed from the infant swing and toy.
-
Keep the batteries out of the reach of children.
-
Change the batteries when the cradle swing stops working satisfactorily.
-
Remove the batteries before storing your cradle swing for a long period.
-
Use the container for the purpose to throw the batteries away
-
Replace and recharge all the batteries at the same time.
-
The rechargeable batteries must be charged under the supervision of an adult.
-
Do not recharge a rechargeable battery in a different charger.
-
The power supply terminals must not be short-circuited.
-
Do not throw the batteries on the fire as they might burst or give off noxious fumes.
-
Batteries, accumulators, or rechargeable batteries are not ordinary domestic waste. They contain a large number of pollutants and dangerous materials; in addition, recycling them enables raw materials to be recovered that can be used for making new objects without exploiting natural resources! This is why they must be thrown
away in compliance with a special collection and recycling cycle. -
Electric equipment is subject to a selective collection procedure.
Do not throw away electrical and electronic equipment waste with the unsorted municipal refuse, but carry out a selective collection. -
**** Throughout the European Union this symbol indicates this product must not be thrown in the dustbin or mixed with domestic waste but undergo selective collection.
SAFETY INSTRUCTIONS TO BE RESPECTED
- The assembly must be carried out by an adult.
- Do not use the product if any components are broken or missing.
- Keep the small components out of reach of children.
- This product does not replace a baby basket or cot. If your child needs to sleep he should be placed in a suitable basket or cot.
- Never use accessories or spare parts other than those approved by the manufacturer.
- Before use, check the locking mechanisms are properly engaged and correctly adjusted.
- Always use the 5 point safety harness.
- Keep the cradle swing well away from any flame, sources of intense heat, electrical sockets, extensions, cookers etc or objects that may be within reach of the child.
- To avoid any risk of suffocation keep the plastic bags of the packaging out of reach of babies and young children.
- Never add a pillow, blanket, or padding; only use the pressure reducing cushion supplied with your cradle swing.
- Do not place objects with strings around the child’s neck; do not hang strings from the cradle swing, and do not tie strings to the toys. Such practices may cause the baby to be strangled.
- Do not place the cradle swing next to a window where the cords of a blind or curtains could strangle the child.
- Do not attach toys other than those supplied by Babymoov
- Do not let the child play with the cradle swing.
COMPOSITION
General diagram
a. Back
b. Back handle
c. Seat base
d. Seat base handle
e. Early-learning arch
f. Rotating base
g. Seat
h. Safety harness
ASSEMBLING THE CRADLE SWING
PUTTING ON AND TAKING OFF THE COVER (m)
- To facilitate the removal or insertion of the cover (m) fold back the back (a) and the seat base (c) with the help of the handles of the seat base (d) and the back (b).
- Taking off: open the zip under the cover (m). Take off the cover (m).
- Putting on: open the zip under the cover (m). Insert the handles of the seat base (d) and the back (b) in the slits of the cover (m).
EARLY-LEARNING ARCH (e)
- Insert the early-learning arch (e) in its base.
- Adjust the early-learning arch (e) to the desired position.
- To remove the early-learning arch (e) pull it upwards by pressing on the tab.
RECLINING
Back (a)
- Pull on the handle of the back (b).
- Choose the desired inclination position.
Seat base (c)
- Pull on the handle of the seat base (d).
- Choose the inclination position desired.
ROTATION 360°
Hold the rotating base firmly (f). Pivot the seat (g) to the desired position.
SAFETY HARNESS
- Attach the shoulder straps (h) to the belt straps (i).
- Insert the assembled straps (h and i) into the crotch harness (j) until you hear a click
- The harness must be adjusted accorded to the size of the child, using adjustment buckles H1 and H2.
PRESSURE REDUCING CUSHION (l)
Pass each shoulder strap of the safety harness (h) in the slits of the
pressure reducing cushion (l).
CONNECTION TO THE MAINS
Insert the cable (n) in the jack port (o).
Starting / stopping
Press the start/stop button (1).
Starting and selecting rocking
Press the button (2) to start the first rocking mode.
Press the button (2) again to move to the next type of movement and select the
one required.
The type of movement (3) selected will start once the indicator light stops
flashing.
To stop the rocking movement, press and hold the button (2) for around 2
seconds.
Movement smeans that the swing will carry out the 7 other types of movements
for 30 seconds each, on a loop.
Rocking speed
To increase the rocking speed press the button + (4). To reduce the rocking
speed press on the button – (4). During selection, a low noise indicates that
the maximum/ minimum speed has been reached.
The LED in the centre of the speed symbol (4) flashes as many times as the
chosen speed intensity (5 speeds).
Timer
To set the rocking time to 10, 20 or 30 minutes, press the button (5).
Press once for 10 minutes, twice for 20 minutes and 3 times for 30 minutes.
The selected time is displayed above the button (5).
Once the selected time has elapsed, rocking stops automatically.
Starting and selecting the
music
Press the button (6) to start the music.
The change the music, press the button (6) once again to move to the preferred
track.
To stop the music, press and hold the button (6) for around 3 seconds.
Volume
To increase the volume, press the + button (7).
To decrease the volume, press the – button (7).
During selection, a low noise indicates that the maximum/ minimum volume has
been reached.
The LED in the centre of the volume adjustment symbol (7) flashes as many
times as the chosen volume intensity.
WASHING MAINTENANCE INSTRUCTIONS
- Check the cradle swing frequently to make sure there are no loosened screws, worn components, torn fabric, or undone stitches.
- Replace or repair the components if necessary. Only use spare parts recommended by Babymoov.
- Excessive exposure to the sun or heat may cause the cradle’s components to be discoloured or deformed.
- The newborn insert (l) is machine washable at 30 °C, 600 RPM spin.
- The main cover (m) can be washed by hand or in the machine on the hand-wash programme. Do not spin. To protect the fabric as much as possible, we recommend placing the cover in a laundry pouch.
* Lifetime warranty. Register within 2 months. See conditions at babymoov.co.uk.
Babymoov
Parc Industriel des Gravanches
16, rue Jacqueline Auriol
63051 Clermont-Ferrand 2 – France
www.babymoov.com
Babymoov UK Ltd
3rd Floor, East Reach House
East Reach
Taunton – TA1 3EN – England
www.babymoov.co.uk
Designed and engineered by Babymoov in France
References
- Babymoov® – Innovative Award-Winning Baby Products
- Babymoov® – Innovative Award-Winning Baby Products
- Babymoov® : Site OFFICIEL | Produits pour Bébé
- Lifetime Warranty Map | Babymoov®