CONRAD 1326418 Helios Preisser Digi-Met Digital Caliper User Manual

Digital Caliper 1326 4.. Operating Instructions
3722548
V1250164029

1326418 Helios Preisser Digi-Met Digital Caliper

We reserve the right to make changes to our products, especially due to technical improvements and further developments.
All illustrations and technical data are therefore without guarantee.
© by HELIOS-PREISSER GmbH

Introduction

The Digital Caliper is a versatile precision measuring instrument which can be employed in harsh conditions both in production and in the wokshop. This Caliper fulfils the protection class IP 67 according to DIN EN 60529 i.e.

• Protection against the penetration of solid contaminants
• Protection against the effects of temporary immersion in water In order to achieve the best use of this instrument it is most important that you read the operating instructions first.
  The basic Digital Caliper consists of:
  – Digital Caliper
  – Battery
  – Operating instructions

Important hints prior to using the digital caliper

• The effects of cooling agent, water, dust or oil do not have a negative influence on the caliper during operation. In order to ensure a long use of this caliper, any contamination on the caliper must be removed immediately after completion of usage. This can be done with a dry cloth (see pic. 2a). Subsequently, to conserve the metal components, these should be lightly smeared with slushing oil.
• Clean a dirty housing with a dry, soft cloth. Remove heavy soiling with a cloth wetted with a neutral reacting solvent. Volatile organic solvents like thinners are not to be used, as these liquids can damage the housing.
• Unauthorized opening of the instrument forfeits the warranty.
• When the „Low-Bat“ symbol appears the intended operation or function can no longer be guaranteed.
  We wish you a satisfactory and long service with your digital caliper. Should you have any questions regarding the instrument, contact us and we shall be pleased to answer them.

Safety Information

Battery

• not rechargeable
• do not incinerate
• dispose off as prescribed

Do not use an electric marking tool on caliper, see pic. 3a

Measuring examples

Technical Data

Inductive measuring system Systéme de mesure inductif 11 mm liquid crystal display LCD hauteur des chiffres 11 mm Battery Lithium 3V, type CR2032, 230 mAh
Operating time approx. 3 years (2000 work. hrs/year)
Protection group IP67 acc. to DIN EN 60529
6 = dust-tight
7 = protected against the effects of temporary immersion in water
Operation temperature + 10°C … + 40°C Storage temperature – 10°C … + 60°C
Measuring range
Resolution
Error limit (mm)
Max. measuring speed

• The values are increased by 0.02 mm when

  • measuring with directional changes of the measuring force
  • measuring depth
  1. On / OFF / RESET
  2. Menu button / Preset activate
  3. O. D.-measuring faces
  4. Measuring faces for distance
  5. ID.-measuring faces
  6. Display
  7. Locking screw
  8. Battery compartment
  9. Measuring scale
  10. Depth rod
  11. Beam

Inserting / changing the battery

Functions

7.1 Auto ON / OFF
Auto OFF / Auto ON
Movement of the slide will automatically switch ON the instrument. If the instrument has not been used for 8 minutes or more, it will be automatically switch OFF.

7.2 ON-OFF / RESET
This function is recommended when the zero point is frequently repositioned (for example; comparative measurements)

Menu functions

Intuitive menu guidance
Symbol ► Open the menu
Symbol ► Change the value

8.7
Call up PRESET

Display Messages

Confirmation of traceability
We declare under our sole responsibility that this product is in conformity with standards and technical data as specified in our sales documents (operating instructions, leaflet, catalogue). We certify that the measuring equipment used to check this product, and guaranteed by our Quality Assurance, is traceable to national standards.
Thank you very much for your confidence in purchasing this product.
EC Declaration of Conformity
This measuring instrument conforms to the applicable EU directives.
A copy of the Declaration of Conformity can be requested from the following address:
HELIOS-PREISSER GmbH, Steinbeisstraße 6, 72501 Gammertingen, Germany.

Notes for disposal

Dear Customer
The measuring instrument contains a non-rechargeable Lithium battery.
If the battery is empty, it may not be disposed of in the household waste!
Spent batteries contain toxic waste which can cause harm to the environment and cause damage to health. Spent batteries and accumulators either must be returned to an outlet where batteries or accumulators are sold, or taken to a municipal collection point, these have an (unpaid) and legal obligation to take back batteries. Please only dispose of spent batteries in the provided collection containers, when disposing Lithium batteries please cover up the Poles.
The removal of batteries are described in the operating instructions / user manual of the instrument / device. All batteries can be recycled; raw materials such as iron, zinc or nickel can be obtained from recycled batteries, thus battery recycling helps with the protection of the environment.
Waste electrical equipment which was sold by us after 23 March 2006 can be returned to us for disposal. We dispose of or recycle our prod-ucts without harming the environment, in accordance with the WEEE Directive 2012/19/EU (Waste
Electrical and Electronic Equipment) as well as the German Electrical and Electronic Equipment Act.

3722548 V1250164029
HELIOS-PREISSER GmbH
Steinbeisstraße 6, D-72501 Gammertingen
Tel.: +49 7574 400-60,
Fax: +49 7574 400-91
vertrieb@helios-preisser.de , www.helios-preisser.de
**** 0215

References

• Start | Preißer Hausverwaltung
• Helios-Preisser – Helios-Preisser

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>