LNC A05021 Flabellum Modern 22.4 In Brass Gold Bedside Instruction Manual

LNC A05021 Flabellum Modern 22.4 In Brass Gold Bedside

Product Information

Specifications

• Item Number: A05021
• Voltage: 120V
• Maximum Wattage: Type A, Max 100W per bulb

Product Usage Instructions

Installation Requirements

Before installation, ensure the following:

• The installation place is clean and dry.
• The installation place can support the weight of the lamp.
• The voltage being used is 120V.
• The maximum wattage per bulb does not exceed 100W.
• Avoid placing the lamp near acidic or alkaline substances to prevent damage to the surface.

Precautions

To reduce the risk of fire, electric shock, or personal injury, follow these precautions:

1. Read the instruction manual carefully and save it for future reference.
2. Always shut off the electricity before starting any work.
3. Turn off or unplug the lamp before replacing bulbs.
4. Allow the lamp to cool down before replacing bulbs, as they may get hot quickly.
5. Use common sense, caution, and care when working with electrical products.

Assembly & Installation Instructions

1. Remove the fixture from the carton and ensure all parts and accessories are included.
2. Turn off the power supply before starting the installation.
3. Press the harp (C) inward without touching the flat plate.
4. Keep the pressed shape and position it properly in the socket assembly (D).
5. Place the lampshade (B) on the harp (C) and fix them with the lock (A).

Ordering Parts
If you need to order replacement parts, keep this sheet for future reference. All parts can be ordered from the place of purchase. When ordering, use the exact wording from the illustration.

Cleaning
To clean the lamp, follow these instructions:

• Wipe the lampshade with a soft cloth.
• Clean the glass body with a mild cleaner, such as mild and nonabrasive soap.
• Avoid using abrasive materials like scouring pads, powders, steel wool, or abrasive paper.

FAQ

• Q: What is the maximum wattage per bulb?
• A: The maximum wattage per bulb is 100W for Type A bulbs.
• Q: Can I use this lamp with a voltage other than 120V?
• A: No, this lamp is designed to be used with a voltage of 120V.
• Q: Where can I order replacement parts?
• A: You can order replacement parts from the place of purchase using the exact wording from the illustration.

Item Number : A05021

WARNING
(To reduce the risk of fire, electric shock, or personal injury):

1. Please read the instructions carefully and save it as you may need it at a later time.
2. Before you start, NEVER attempt any work without shutting off the electricity until the work is done.
   • Do not turn on the power supply until the installation is finished.
3. The installation place should be clean and dry.
4. Make sure that the installation place can stand the weight of the lamp before installation.
5. Make sure the voltage you are using is 120V. The maximum wattage is Type A, Max 100W per bulb.
6. Keep the lamp away from acidic and alkaline substances in case of damaging the surface of the lamp.
7. When replacing bulbs, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
8. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.

IMAGE FOR FINISHED PRODUCT:

PARTS TYPE & QTY INCLUDING

• (A) Lock (1)
• (B) Lampshade (1)
• (C) Harp (1)
• (D) Socket assembly(1)
• (E) Body (1)
• (F) Wire (1)

ASSEMBLY & INSTALLATION INSTRUCTIONS

1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above illustration.
2. Turn off power
3. Do not turn on the power supply until the installation is finished.
4. Push the two caps of harp (C) upwards.
5. Press harp (C) inward with your hand, taking care not to put your hand on the flat plate.
6. Keep the pressed shape, and then put it in the proper position of socket assembly (D).
7. Return the two caps to them original place. Please refer to the illustration for the above steps.
8. Remove lock (A) from harp (C). Place lampshade (B) on harp (C), and then fix them with lock (A) as shown in the illustration.
9. Install the bulb (not included) (Please do not exceed the maximum wattage recommended on the socket.) The red circle on the right figure is the switch of the light. When you want to turn on the light, please turn as shown in the figure.
10. Check everything is already installed properly, and then you can turn on the light. Enjoy!

ORDERING PARTS
Keep this sheet for future reference in case you need to order replacement parts. All parts for this fixture can be ordered from the place of purchase. Be sure to use exact wording from illustration when ordering parts.

CLEANING

1. To clean, wipe the lampshade with a soft cloth.
2. Clean the glass body with a mild cleaner (such as mild and non-abrasive soap).
3. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>