UltraPro B09H1KKXYD Motion-Sensing Bathroom Light Installation Guide
- June 6, 2024
- UltraPro
Table of Contents
UltraPro B09H1KKXYD Motion-Sensing Bathroom Light
**Thank you** for your purchase! Instructions made easy
Read
instructions or watch easy-to-follow video. Scan code or visit
https://byjasco.com/60258i
|
For
deals, to register your purchase and to tell us how we’re doing, simply scan
the code or visit byjasco.com/deals
Discover more lighting from UltraPro at byjasco.com
| 
| Like our
product? Leave a review on your favorite retailer website or
amazon.com
| Having
problems? Let us know how we can help.
1-800-654-8483 between 7AM-8PM, M-F,
Central Time.
INSTALLATION
BATTERY INSTALLATION
Remove the cover on the back of the light and install 3 AAA batteries (not included), noting polarity.
TOILET MOUNTING
Ensure the flexible arm is securely attached into the port above the battery
compartment. Bend the flexible arm to form a right angle and securely hook it
onto the rim of the toilet bowl. The base of the light will sit outside of the
toilet while the arm sits inside.
Note: Make sure that the arm is securely attached before letting go.
WALL MOUNTING:
Remove the flexible arm by sliding it downwards and gently pulling out. Use
the keyhole mounts on the base and screws (included) to mount it onto a wall
or other flat surface.
Note: Ensure that the mounting location is a dry location and capable
of supporting the light.
OPERATION
MOTION SENSING
This light features both motion sensors and dusk-to-dawn activation. While in low light conditions, the light will automatically turn on when motion is detected within 15ft. and in a 120-degree field. The light will turn OFF after 120 seconds (2 minutes) of inactivity.
COLOR SELECT
Press the button on the front of the light to change the color of the LED inside the toilet bowl. There are multiple options:
- Color-changing mod
- Stop on the current/your favorite color
- Color-select mode (multiple solid colors to choose from)
- Color-theme one (fades between blue, green, yellow)
- Color-theme two (fades between pink, red, purple, orange)
AMBER GUIDE LIGHT
The light’s base produces a warm amber glow. To turn this feature ON/OFF, hold
the button down for three seconds. The LEDs will flash quickly to signify that
the new change is applied.
Note: Only the small LED on the end of the flexible arm is color
changing. The light on the base of the light only produces an amber glow.
CLEANING INSTRUCTIONS
Clean the light by wiping with a clean, damp cloth. Do not spray cleaning solution directly onto the light, immerse it water or place it under running water.
MADE IN CHINA
Distributed by Jasco Products Company LLC,10 E. Memorial Rd., Oklahoma City,
OK 73114.
Questions? Contact our U.S.-based Consumer Care at 1-800654-8483 between 7AM-
8PM, M-F, Central Time. 90-day warranty. Visit
www.byjasco.com for warranty details.
