RAIN HARVESTING TSEF18 High Wall Tank Screen Installation Guide
- June 9, 2024
- Rain Harvesting
Table of Contents
High Wall Tank Screen 360
Hood Kit w/ Screw Down Ring
Installation and Specification Guide
PRODUCT DETAILS
Never lose another drop of rain again with the High Wall Tank Screen 360 Hood
Kit – an ultra high flow tank screen with an integrated splash and light
cover.
Effortlessly capture huge amounts of water in your tank – even as debris loads
build on the screen.
High Wall design sits above the water line to ensure debris isn’t soaking if
you’re tank is full.
| Code | Size | Country |
|---|---|---|
| TSEF18 | 400mm | Global |
Installation
WHAT’S IN THE BOX?
- High Wall Tank Screen 360
- Tank Screen 360 Hood
- Easy Fit Screw Down Inlet Ring
TOOLS/MATERIALS YOU MAY REQUIRE
- Drill
- Screws
HOW IT WORKS
The Tank Screen 360 is a high flow inlet solution for rainwater tanks. Its
unique design keeps out sunlight, pests, and debris and offers simple
maintenance.
Figure 1
Suggested Installation Orientations
- Secure your Inlet Ring by installing screws at 3 points around the perimeter. Make sure to use a screw that is appropriate for your tank material
- To secure your High Wall Tank Screen 360, place it over the ring so that the 3 clips on the Tank Screen 360 align with the clips on the Inlet Ring. Push down firmly on each of the 3 clips until you hear them click into place. Ensure all 3 clips are secured.
- To install your Hood, secure it to the Tank Screen 360 by aligning the clips and pushing down firmly. Once again ensure that all 3 clips are secured
- Install your inlet pipes so that they sit in the opening between the Tank Screen 360 and the hood. The opening will allow for up to two 100mm pipes (Figure 1). Ensure the pipes are inserted into the unit fully to avoid splashing.
- To remove a Tank Screen 360 or Hood, lift each of the release tabs until they disengage, and the screen or hood can be lifted off.
Product Specifications
High Wall Tank Screen 360
Hood Kit w/ Screw Down Ring
Country| Code| TANK HOLE SIZE| A| B| C| D|
E
---|---|---|---|---|---|---|---
Global| TSEF18| 348-382| 420| 207| 58| 119| 346
13.7″-15.04″| 16.54″| 8.15″| 2.28″| 4.69″| 13.62″
All dimensions are in mm unless otherwise stated.
Maintenance
You should regularly inspect your High Wall Tank Screen 360 and remove any
leaves or debris.
For a more thorough clean, simply unclip your High Wall Tank Screen 360 and
hose it off before reattaching to your tank.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on
to deliver the volume – or quality – of water that you require. That is where
we can help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or
wanting to keep the garden green, our simple steps will help you achieve your
goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product
usage. Further information is available from Rain Harvesting Pty Ltd and from
the installation and Operating instructions. This specification sheet must be
read in conjunction with the installation and Operating Instructions and all
applicable statutory requirement. Product specifications may change without
notice.
© Rain Harvesting Pty Ltd
For more information or to find out
how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>