beper P102GEL100 Ice Shaver Instruction Manual

: June 8, 2024
: beper

Table of Contents

beper P102GEL100 Ice Shaver
Precautions
Components
Instructions for use
Cleaning
Technical data
GUARANTEE CERTIFICATE
Documents / Resources

beper P102GEL100 Ice Shaver

For further information and/or for instructions for use in other languages, please visit: beper.com

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from dangerous sources. It is recommended not to throw these packing ma-terial in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own mu-nicipality.
If the supply cord is damaged, it must be replaced by the manufac-turer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manu-facturer cannot be responsible for any damages deriving from impro-per, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse the cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or people without experience or technical ability to use the appliance if they are not properly watched over.
Close supervision is necessary when any appliance is used by or near children.

Warning for use

Keep away fingers, utensils, etc., from the ice bucket while it is working, in order to reduce the risk of damage to people and to the machine itself. Utensils or sharp and metal objects must not be used inside the ice bucket. Such objects can damage the appliance. It is possible to use rubber or wooden utensils when the appliance is switched off.
The container has a sharp blade inside. Handle the container with care during assembly, disassembly, and cleaning.
Before putting the appliance into operation, check that the ice bucket and the container are clean and free from foreign objects.
Never touch the moving parts.
Do not put your hands under the ice bucket when the appliance is operating and when it is plugged in.
Do not turn on the appliance when it is empty.
The appliance must not work for more than 5 consecutive minutes. Wait for the motor to cool before performing turn on again the appliance.
Unplug the power cord from the electrical outlet before removing the container or the ice bucket.

Components

Lid
Lock nut
Ice bucket
Container
Main unit
Power cord
Support base

Instructions for use

Insert the main unit into the opening on the support base.
Place the container on the main unit by aligning the flap on the container with the seat in the main unit (Fig.B). Insert the ice bucket into the container and place the lock nut in the hole on the ice bucket (Fig. C). Turn the nut lockwise to lock the ice bucket.
Place a glass on the base under the ice bucket.
Insert the ice into the basket, taking care never to fill it over the MAX level indicated on the basket.
Insert the plug into the socket and place the lid on the container by aligning the flap of the lid with the seat on the main unit.
Rotate the lid counterclockwise. The flap on the cover enters the machine body and activates the rotation of the engine. The basket starts spinning and the crushed ice will drop into the glass. The lid must be kept stuck with the hand. To stop rotation of the basket, turn the lid clockwise, bringing the flap on the lid back out of the machine body (Fig. D).
Disconnect the plug from the socket.
At the end of the operation, there may be residues of ice in the basket and in the container. Remove excess ice.

Cleaning

Disconnect the plug from the socket and disassemble the appliance in all its components.
Wash the lid, ice bucket, container and lock nut in warm soapy water.
Dry all components.
Clean the motor body and the support base with a damp sponge or rag.

Suggestions

If the appliance motor works excessively, try leaving the ice cubes at room temperature for a few minutes. Never fill the ice bucket over the MAX level. The lid must close on the container without forcing.
Ice in the shape of cubes will be shredded better than ice with rounded shapes.
Use medium / small ice cubes. If the cubes are very large, break them before inserting them into the product.

Technical data

Power: 30W
Power supply: 220-240V~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap-plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the applian-ce’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

The appliance has been used properly and for the purpose for which it has been intended.
The appliance has not been tampered with, otherwise, it is not maintainable.
The purchase receipt shall be presented.
The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.

YOU MIGHT ALSO LIKE

Waffle cone and bowl maker
Cod.: P101CUD001
Ideal for preparing crunchy waffle ice-cream cones or cups, waffle rolls and cheese waffles
beper.com

BEPER SRL Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona Tel. 045/7134674 – Fax 045/6984019 beper.com

CUSTOMER CARE BEPER