LNC LYVNYMR5023G8C Black Table Lamp with White Fabric Shade Instructions

: June 15, 2024
: LNC

Table of Contents

LNC LYVNYMR5023G8C Black Table Lamp with White Fabric Shade
Product Information
Product Usage Instructions
FAQ
SAFETY PRECAUTION
PARTS TYPE & QTY INCLUDING
ASSEMBLY & INSTALLATION INSTRUCTIONS
ORDERING PARTS
CLEANING
ABOUT COMPANY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LNC LYVNYMR5023G8C Black Table Lamp with White Fabric Shade

LNC-LYVNYMR5023G8C-Black-Table-Lamp-with-White-Fabric-Shade-
FIG-1

Product Information

Specifications:

Item Number : A05023
Voltage: 120V
Maximum Wattage: Type A, Max 100W per bulb

Product Usage Instructions

Safety Precautions:
Before starting any work, make sure to read the instruction manual carefully and save it for future reference. Follow these safety precautions to reduce the risk of fire, electric shock, or personal injury:

Never attempt any work without shutting off the electricity until the work is done.
Ensure the installation place is clean and dry.
Make sure the installation place can support the weight of the lamp.
Use a voltage of 120V.
Do not exceed the maximum wattage of Type A, Max 100W per bulb.
Avoid contact with acidic and alkaline substances that may damage the lamp’s surface.
When replacing bulbs, turn off or unplug the lamp and wait until it cools down.
Use common sense, caution, and care when handling electrical products.

Assembly & Installation Instructions:

Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the illustration.
Turn off the power supply before starting the installation.
Press harp (C) inward with your hand, taking care not to put your hand on the flat plate.
Keep the pressed shape and then put it in the proper position of socket assembly (D).
Place the lampshade (B) on the harp (C) and fix them with the lock (A) as shown in the illustration.
Ensure everything is properly installed before turning on the light.

FAQ

How can I order replacement parts?
Keep this sheet for future reference. If you need to order replacement parts, you can order them from the place of purchase. Make sure to use the exact wording from the illustration when ordering parts.
How should I clean the fixture?
To clean the fixture, wipe it with a soft cloth. Avoid using abrasive materials such as scouring pads or powders, steel wool, or abrasive paper.

SAFETY PRECAUTION

WARNING (To reduce the risk of fire, electric shock, or personal injury):

Please read the instruction carefully and save it as you may need it at a later time.
Before you start, NEVER attempt any work without shutting off the electricity until the work is done.
Do not turn on the power supply until the installation is finished.
Installation place should be clean and dry.
Make sure that the installation place can stand the weight of the lamp before installation.
Make sure the voltage you are using is 120V. The maximum wattage is Type A, Max 100W per bulb.
Keep the lamp away from acidic and alkaline substances in case of damaging the surface of the lamp.
When replacing bulbs, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.

PARTS TYPE & QTY INCLUDING

(A) Lock (1)
(B) Lampshade (1)
(C) Harp (1)
(D) Socket assembly(1)
(E) Body (1)
(F) Wire (1)

ASSEMBLY & INSTALLATION INSTRUCTIONS

Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above illustration.
Turn off power
Do not turn on the power supply until the installation is finished.
Push the two caps of harp (C) upwards.
Press harp (C) inward with your hand, taking care not to put your hand on the flat plate.
Keep the pressed shape, and then put it in the proper position of socket assembly (D).
Return the two caps to them original place.
Please refer to the illustration for above steps.
Remove lock (A) from harp (C).
Place lampshade (B) on harp (C),and then fix them with lock (A) as shown in the illustration.
Remove lock (A) from harp (C).
Place lampshade (B) on harp (C),and then fix them with lock (A) as shown in the illustration. Install the bulb (not included) (Please do not exceed the maximum wattage recommended on the socket.)
The red circle on the right figure is the switch of the light. When you want to turn on the light, please turn as shown in the figure.
.Check everything is already installed properly, then you could turn on the light. Enjoy!

ORDERING PARTS

Keep this sheet for future reference in case you need to order replacement parts. All parts for this fixture can be ordered from the place of purchase. Be sure to use exact wording from illustration when ordering parts.