OPT7 AURA PRO Bluetooth Control Box Kit Installation Guide

OPT7 AURA PRO Bluetooth Control Box Kit Installation Guide

There are two ways the AUX WIRE / Door Assist on the AURA control box can be connected on the vehicle in order to activate the door assists feature. Door assist allows you to choose the desire color choice upon selection on the “OPT7 CONNECT” app.

This feature will activate when the AUX wiring is connected to the positive and negative wiring of dome light or door light.

(*Please check the following wiring diagram before using this function to prevent incorrect installation)

* NOTE: Trigger wire for door light is recommended if your dome light lights up progressively when opening door.

METHOD 1 (DOME LIGHT WIRING) FOR DOUBLE AUX WIRES

AURA ORIGINAL AUX WIRING FOR DOME/DOOR LIGHT
This feature actives white light only

**STEP 1

** Remove the dome light plastic cover.

STEP 2

Using a screwdriver, remove the two Phillips-heads crews on the cover. Next, remove the dome light module, locate the power wires.

STEP 3

**STEP 4

** Place the light back in.

**STEP 5

Done**

METHOD 2 (DOOR LIGHT WIRING) FOR DOUBLE AUX WIRES

STEP 1

On the driver side door, locate the door/courtesy light. Remove the plastic cover.

STEP 2

Unplug the connect wire

STEP 3

Connect positive AUX wire to the positive wire on the door light. Connect negative AUX wire to the negative wire on the door light.
STEP 4

Place the light back in.

STEP 5

Done

METHOD 1 (DOME LIGHT WIRING) FOR SINGLE AUX WIRE

**STEP 1

** Remove the dome light plastic cover.

STEP 2

Using a screwdriver, remove the two Phillips-head screws on the cover. Next, remove the dome light module, locate the power wires.

STEP 3

Connect AUX wire to the positive wire on the Dome light.

**STEP 4

**

**STEP 5

** Done

METHOD 2 (DOOR LIGHT WIRING) FOR SINGLE AUX WIRE

**STEP 1

** Place the light back in.

STEP 5

METHOD 2 (DOOR LIGHT WIRING) FOR SINGLE AUX WIRE

STEP 1

On the driver side door, locate the door/courtesy light. Remove the plastic cover.

STEP 2

Unplug the connect wire so you may locate the posive guage trigger wire.

STEP 3

Connect the AUX wire to the positive wire by twisting the metal wires together for the door light.

STEP 4

Place the light back in.

STEP 5

Done

OPTIONAL METHODS FOR NOT USING AUX WIRES

If you plan to not use the DOOR ASSIST/AUX Wires, simply use a good amount of electrical tape to wrap the (+) very carefully, next connect the (-) wire to the negative dome light. This will fix any flashing white light issues that may occur if these wires are left unconnected.

You can use a pry tool to remove the plastic cover on the side door panel. Afterward, connect the “-” wire to a negative power source. Make sure to tap into the wires safely. If you’re not familiar with this process, it’s advisable to seek assistance from a professional.

For additional assistance, reach out to our customer support team via email.

Using the electrical tape method, take two pieces of tape and carefully wrap them fully if you do not wish to use the DOOR ASSIST/AUX wires at all in the near future. Ensure to move the wires away from any positive power source that may trigger them on.

Most AURA kits if installing near the engine bay, you may also connect the following to the car’s battery. Simply take the (-) terminal to the (-) battery terminal, and using the electrical tape method to wrap the (+) wire on the control box.

For additional assistance, reach out to our customer support team via email.

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.

If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

OPT7 recommends installation for safety and guidance.

Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>