Commercial Electric LIAK366 Ceiling Fan LED Light Kit User Guide
- June 15, 2024
- Commercial Electric
Table of Contents
Item #1009 854 994
Model #LIAK366
USE AND CARE GUIDE
CEILING FAN LED LIGHT KIT
LIAK366 Ceiling Fan LED Light Kit
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this light kit. We strive to continually create
quality products designed to enhance your home. Visit us online to see our
full line of products available for
your home improvement needs. Thank you for choosing Commercial Electric!
Safety Information
The following responsible party designated in FCC §2.909 is responsible for
this declaration:
Model Number: LIAK366
Company Name: TAL INTERNATIONAL CORPORATION
Company Address: 2919 E. Philadelphia St., Ontario, CA 91761, U.S.A.
Telephone Number: 909-923-2888 Fax:
909-923-8337
CAUTION: To reduce the risk of electrical shock, before starting
installation, disconnect the power by turning off the circuit breaker or
removing the fuse at the fuse box. Turning the power off using the fan switch
is not suficient.
CAUTION: To avoid accidental burning, allow the glass shade to cool
completely before touching or replacing the glass shade.
CAUTION: To reduce the risk ofire and electrical shock, this light should
be used only with the fan models listed below: Model: AK366DL, AK366ADL,
AK366BDL (AK366, AK366A, AK366B) Manufactured by company: Air Cool Industrial
Co, Ltd.
WARNING: Changes or modifcations to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: Suitable For Use In Damp Locations.
WARNING: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
READ AND SAVE THESE INSTRUCTIONS
Warranty
The supplier warrants the light kit to be free from defects in workmanship and
material present at time of shipment from the factory for three years after
the date of purchase by the original purchaser. The supplier also warrants
that all other light kit parts, excluding any glass, to be free from defects
in workmanship and material at the time of shipment from the factory for a
period of three years after the date of purchase by the original purchaser. We
agree to correct such defects without charge or at our option replace with a
comparable or superior model if the product is returned. To obtain warranty
service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage
to any part such as by accident, misuse, improper installation or by afixing
any accessories, is not covered by this warranty. Because of varying climatic
conditions this warranty does not cover any changes in brass fnish, including
rusting, pitting, corroding, tarnishing, or peeling. Brass fnishes of this
type give their longest useful life when protected from varying weather
conditions. Servicing performed by unauthorized persons shall render the
warranty invalid. There is no other express warranty. Commercial Electric
hereby disclaims any and all warranties, including but not limited to those of
merchantability and fitness for a particular purpose to the extent permitted
by law. The duration of any implied warranty which cannot be disclaimed is
limited to the time period as specifed in the express warranty. Some states do
not allow a limitation on how long an implied warranty lasts, so the above
limitation may not apply to you. The retailer shall not be liable for
incidental, consequential, or special damages arising out of or in connection
with product use or performance except as may otherwise be accorded by law.
Some states do not allow the exclusion of incidental or consequential damages,
so the above exclusion or limitation may not apply to you. This warranty gives
specitic legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties. Shipping costs
for any return of product as part of a claim on the warranty must be paid by
the customer.
Contact the Customer Service Team at 1-833-HDFANS-1 /
(1-833-433-2671) or visit
www.HOMEDEPOT.COM.
Pre-Installation
TOOLS REQUIRED
PACKAGE CONTENTS
| Part | Description | N. W. | 1 |
|---|---|---|---|
| A | 24W LED light kit assembly | 1.57 kg (3.45 lb) | Quantity |
HOMEDEPOT.COM
Please contact 1-833-HDFANS-1 /
(1-833-433-2671) for further
assistance.
Assembly — Installing the Light Kit
-
Preparing the fan
Turn the light cover (AA) counterclockwise to remove the light cover (AA) from the light kit mounting plate (BB). -
Installing the LED light kit to the light kit mounting plate
CAUTION: Before starting installation, disconnect the power by turning off
the circuit breaker or removing the fuse at the fuse box. Turning power off
using the fan switch is not suficient
to prevent electric shock.
NOTE: If the light kit could be wobbled by hand, it means the light kit is
not twisted completely till the right position. Keep twisting the light kit
till it could not be wobbled by hand.
While holding the 24W LED light kit (A) under the fan motor assembly (FF), snap together the wire connection plugs (CC):
- White to white
- Black to black
Position the notches (DD) on the inner edge of the 24W LED light kit (A) so they match the tabs (EE) on the outside of the rim on the light kit mounting plate (BB). Carefully lift the 24W LED light kit (A) inside the light kit mounting plate (BB) and secure it to the fan by turning the 24W LED light kit (A) clockwise until snug.
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST Saturday
1-833-HDFANS-1 / (1-833-433-2671)
HOMEDEPOT.COM
Retain this manual for future use.