VIMAR 09597 IoT Connected Gateway Instructions
- June 15, 2024
- VIMAR
Table of Contents
Gateway View Wireless Bluetooth ®
wireless technology 4.2 Wi-Fi, LED RGB,
power supply 100-240 V 50/60 Hz – 2 modules.
09597 IoT Connected Gateway
Read the instructions before installation and/or use.
The gateway is a Bluetooth technology Wi-Fi device designed to allow dialogue
with wireless devices to permit the configuration, supervision, system
diagnostics and its integration with voice assistants. It is the main device
that manages the Bluetooth technology Mesh network and via the View Wireless
App it receives the system configuration via Bluetooth technology.
The presence of wi-fi connectivity is required to allow the connection to the
cloud for supervision (local and remote) and for integrations with the Alexa,
Google Assistant and Siri voice assistants.
It is also compatible with Apple Homekit.
The gateway has a front push button for configuration/reset and an RGB LED for
indicating the device state.
FEATURES
- Rated supply voltage: 100-240 V~, 50/60 Hz.
- Dissipated power: 0.9 W
- RF transmission power: < 100mW (20dBm)
- Frequency range: 2400-2483.5 MHz
- Terminals: 2 (L and N) for line and neutral
- 1 front push button for configuration and reset
- RGB LED indicating the device state
- Operating temperature: -10 ÷ +40 °C (indoor)
- Protection degree: IP40
- Configuration via View Wireless App.
- Controllable from View App and Alexa, Google Assistant and Siri voice assistants.
- Appliances of class .
OPERATION.
LED indications
| Device in configuration | flashing BLUE |
|---|---|
| Problem on Mesh network | flashing BLUE/RED |
| No Wi-fi network | flashing RED |
| FW upload/update under way | flashing GREEN |
| Start-up sequence | flashing WHITE slowly |
| Manual association procedure | flashing BLUE quickly |
| Wi-fi credentials reset procedure | flashing GREEN quickly |
| Factory reset procedure | flashing WHITE quickly |
| Standard operation | LED off |
| Internal error (reset the gateway as described in “Manual procedures”) |
flashes PURPLE
Mesh network, battery-less controls and Cloud check| flashing BLUE quickly
Manual procedures
During the first 5 minutes from power-up of the gateway and once you have waited for the product to be completely initialised (in other words until the white LED stops flashing after the first few seconds of being powered), the following operations can be carried out:
-
Press the front push button for 10 s and the LED starts to flash blue; release the push button to proceed, via the View Wireless App, with associating the gateway with a system whose credentials you do not have (follow the self-guided procedure of the View
Wireless App). -
Press the push button for 20 s and the LED starts to flash green; release the push button to delete the Wi-fi credentials only.
-
Press the push button for 30 s and the LED begins to flash white quickly; release the push button to perform the gateway reset and restore the factory settings (so the wi-fi credentials, the mesh credentials, the system databases and all the associations with Homekit are deleted).
CONFIGURATION.
For configuration operations on the Bluetooth system please see the instruction manual for the View Wireless App.
INSTALLATION RULES.
- Installation must be carried out by qualified persons in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.
- The device must be installed in flush mounting boxes or surface mounting boxes with Neve Up supports and cover plates.
- Install at a height of less than 2 m.
- An easily accessible omnipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream of the device.
REGULATORY COMPLIANCE.
RED Directive. RoHS directive. Standards EN IEC 62368-1, EN 300 328, EN 301
489-17, EN IEC 62311, EN IEC 63000.
Vimar SpA declares that the radio equipment complies with Directive
2014/53/EU.
The full text of the EU declaration of conformity is on the product sheet
available on the following website: www.vimar.com
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
WEEE – User information
The crossed bin symbol on the appliance or on its packaging indicates that the
product at the end of its life must be collected separately from other waste.
The user must therefore hand the equipment at the end of its life cycle over
to the appropriate municipal centres for the differentiated collection of
electrical and electronic waste. As an alternative to independent management,
you can deliver the equipment you want to dispose of free of charge to the
distributor when purchasing a new appliance of an equivalent type. You can
also deliver electronic products to be disposed of that are smaller than 25 cm
for free, with no obligation to purchase, to electronics distributors with a
sales area of at least 400 m2. Proper sorted waste collection for subsequent
recycling, processing and environmentally conscious disposal of the old
equipment helps to prevent any possible negative impact on the environment and
human health while promoting the practice of reusing and/or recycling
materials used in manufacture.
Apple HomeKit is a trademark of apple Inc. App Store is a service mark of
Apple Inc. To control this HomeKit-enabled accessory, iOS 9.0 or later is
recommended. Controlling this HomeKit-enabled accessory automatically and away
from home requires an apple TV with tvOS 10.0 or later or an iPad with iOS
10.0 or later or a HomePod/Siri set up as a home hub.
The Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in
the U.S. and other countries and regions. App Store is a service mark of Apple
Inc.
Google, Google Play and Google Home are trademarks of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates.
FRONT AND REAR VIEW
A: Front push button
B: LED
Viale Vicenza, 14
36063 Marostica VI – Italy
**www.vimar.com
09597 01 2310**