xiaomi WPB15Z 10000 mAh Wireless Power Bank User Manual

June 4, 2024
Xiaomi

xiaomi-logo

xiaomi WPB15Z 10000 mAh Wireless Power Bank

Read this manual carefully before use, and retain it for future reference.

Product Overview

Thank you for choosing the 10000mAh Mi Wireless Power Bank Essential. This high-capacity power bank features a high-quality lithium polymer battery cell and charging and discharging chip for excellent safety, efficiency, and compatibility. It supports both wired and wireless charging.xiaomi-
WPB15Z-10000-mAh-Wireless-Power-Bank-fig-1

10000mAh Mi Wireless Power Bank Essential automatically detects wired charging and discharging. Once the power bank stops discharging, the battery level indicator will go off after two minutes.

Safety:
This power bank is equipped with multiple safeguarding technologies to prevent overcharging, over-discharging, overheating, and short circuits in any working condition.

Fast Charging:
When using the USB-A output to charge a device, the maximum output power is 18 W. USB-A supports 5 V/2.4 A, 9 V/2 A, and 12 V/1.5 A fast charging mode.

Compatibility:
A built-in smart USB charge controller, compatible with most mobile phones and other devices in the market.

Quality:
High-quality lithium polymer battery and a durable charging and discharging chip.

Charging

Use a Mi power adapter and cable to charge the power bank via the USB-C port. When charging, the indicator displays the battery level as follows:xiaomi-
WPB15Z-10000-mAh-Wireless-Power-Bank-fig-6

Discharging

This power bank supports charging devices via USB-A cable and wireless at the same time. When discharging, the indicator displays the battery level as follows:xiaomi-WPB15Z-10000-mAh-Wireless-Power-Bank-
fig-7

Low-current discharge: When the power bank is not charging, double press the battery level check button to enter low-current discharge mode. In this mode, it can be used for charging small devices such as Bluetooth headsets and smart bands, and the indicators will be lit on one by one. To exit the low-current discharge mode, press the battery level check button. The device will automatically exit this mode after two hours.

To enable the wireless charging function, press or double press the battery level check button, or connect the power adapter to the power bank. Then the wireless charging indicator lights up, and the power bank is on standby for wireless charging. To turn off the wireless charging function, press and hold the battery level check button for more than 3 seconds. Then the wireless charging indicator goes off. The indicator shows the working status as follows :xiaomi-WPB15Z-10000-mAh-Wireless-Power-Bank-fig-8

When the power bank is not being charged, you can press the battery level check button to enable the wireless charging function. If no device that supports wireless charging is detected on the wireless charging pad, the wireless charging function will be disabled after 1 minute. If a device that supports wireless charging is detected but then removed from the wireless charging pad, the wireless charging function will be disabled after 1 minute, then the power bank enters into sleep mode. During the sleep mode, the power bank will automatically detect whether any device that supports wireless charging is on the wireless charging pad every 10 minutes. Once detected, the wireless charging function will be enabled, and the power bank will start to charge the device.

Sleep mode:
Both the wireless charging indicator and the battery level indicators are off.

Keep your phone centered on the wireless charging pad when charging wirelessly. If the phone does not begin charging right away, adjust the position until its charging icon appears. Refer to the figure below for proper device placement.

Warning

Improper use may result in battery failure, overheating, and even fire or explosion. To ensure your safety and minimize the risk of personal injury and property damage, please observe the following precautions:

  • This product is not a toy. Please keep it out of reach of children at all times to avoid accidents.
  • Make sure the charger for the power bank complies with the local safety standards to prevent electric shock or damage to the battery.
  • Do not expose this power bank to pressure, impact, strong vibrations, or liquids. Any of these occurrences may lead to a short circuit or cause damage to the battery or electrical circuit. When this happens, stop using the power bank immediately, and dispose of it properly.
  • When this power bank becomes swollen, deformed, starts to leak, or its capacity is significantly reduced, please stop using it immediately and dispose of it properly.
  • Do not charge or discharge this power bank in places that affect its heat dissipation, such as in the pocket of pants, a closed bag, nor on a bed or sofa. Make sure it is not covered by clothes, pillows, bedding, or other items, so as to ensure good heat dissipation from phones and other devices.
  • Do not dismantle, crush, puncture, or short circuit the product or expose it to liquids, fire, heat sources such as stoves, heaters, or an environment with an ambient temperature higher than 60°C (140°F).
  • When it is hot, do not leave this power bank in a car or other places in direct sunlight.
  • This power bank contains a lithium polymer battery. Opening the casing is strictly prohibited so as to avoid battery damage or safety hazards.

Precautions

  • Please fully charge this product before using it for the first time.
  • Select the appropriate charger and USB cable (Mi brands are recommended) when charging the power bank or using it to charge other devices.
  • When using the power bank to wirelessly charge a device that has a protective case, make sure the case is non-metallic and has a thickness of 4 mm or less.
  • If a power adapter is used to charge the power bank while wirelessly charging a device, the adapter must meet the following requirements:
    1. Have an output of 5 V/1 A or above, or Quick Charge (QC) 2.0, and support 5 W wireless charging.
    2. Have an output of 9 V or 12 V, or Quick Charge (QC) 3.0, and supports 10 W wireless charging.
  • Do not leave this power bank unattended while charging, and unplug it from the power supply before going out or leaving it unattended for a long time.
  • When this power bank is fully charged or it fully charges other devices, unplug the cable in a timely manner. After using the wireless charging function to fully charge another device, remove devices in time from the power bank to avoid power consumption of the power bank.
  • When the battery level is not displayed after pressing the button, it may be because the power bank is in a protective state. Try plugging in an external charger to restore the power bank.
  • When not using this power bank for a long time, please keep its battery level in the range of about 25–50%, and store it in a cool and dry environment. Avoid long-term storage of this product at a full or empty battery level to extend the battery life.
  • Do not place cards with a magnetic strip or chip (such as an ID or bank card) near the product, as this could damage the card.
  • Keep implanted medical devices including pacemakers, and cochlear implants at least 20 cm away from the power bank at all times in order to avoid potential interference with such devices.

Note:
Illustrations of products, accessories, and user interfaces in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

CE
Hereby, Zimi Corporation declares that the radio equipment type 10000mAh Mi Wireless Power Bank Essential is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Specifications

  • Model: WPB15ZM Battery Type: Lithium polymer battery
  • Cell Capacity: 10000 mAh 3.7 V (37 Wh) Rated Capacity: 5800 mAh (5 V/2.4 A)
  • Operating Temperature: 5 °C to 35 °C
  • Item Dimensions: 14.79 cm × 7.06 cm × 1.66 cm
  • Input Port: USB-C Output Port: USB-A
  • Input: USB-C Input (single port): 5 V=2.4 A, 9 V=2 A, 12 V=1.5 A
  • USB-C Input (simultaneous USB-A output): 5 V=2.4 A
  • USB-C Input (simultaneous wireless output): 5 V=2 A, 9 V=2 A, 12 V=1.5 A
  • USB-C Input (simultaneous USB-A and wireless output): 5 V=3 A
  • Wireless Output: 10 W Max.
  • Wired Output: (USB-A) 5 V=2.4 A 9 V=2 A 12 V=1.5 A Max.
  • Simultaneous Wired and Wireless Output: 15 W
  • Wireless Charging Distance: ≤5 mm
  • Operation Frequency: 110-148KHz
  • Charging Time: Approx. 4 hours (9 V/2 A 12 V/1.5 A charger, charging cable included)
    • Approx. 6 hours (5 V/2 A charger, charging cable included)

Anti-counterfeit Label Instructions

Each 10000mAh Mi Wireless Power Bank Essential comes with an anti-counterfeit label on the outer package. Scratch the coating and go to http://chaxun.mi.com to check authentication.

Anti-counterfeit Label

Scratched-off Coating

For further information, please go towww.mi.com.

  • Manufactured for: Xiaomi Communications Co., Ltd.
  • Manufactured by: Zimi Corporation (a Mi Ecosystem company).
  • Address: A913, No. 159 Chengfliang Road, Jiangyin, Jiangsu, China.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals