VIMAR K42917 Video Entryphone System User Manual

: May 15, 2024
: VIMAR

User Manual

K42917, K42937

7in video touch internal unit plug-in / Additional 7inTSmonitor DIN power supply

ELVOX Videocitofonia

Characteristics & functions

System

The system supports up to two outdoor stations, one CCTV camera for each outdoor station and three indoor stations per family, for a maximum of four families (creating multi-family systems requires the use of the bus distributor, which is available individually or supplied in the two-family kits). The video entryphones in a system may be all of the same type or of different types:

Video entryphone in version with touch sensitive keys, available in kits K42910, K42911, K42912, K42930, K42931, K42932
Video entryphone in touch-screen version, available in kits K42915, K42916, K42917, K42935, K42936, K42937
and
Video entryphones in Wi-Fi touch screen version, available in kits K42945, K42946, K42947, K42955, K42956, K42957

Video entryphone

7″ capacitive touch screen monitor
Internal flash memory and micro SD card support
Automatic and manual video/image recording
Intercom function between indoor units (of the same family)
Adjustable brightness, colour and contrast
Adjustable ringtone volume and conversation volume
6 selectable melodies
“Do not disturb” function
Multiple languages (Italian, English, French, German, Spanish, Portuguese, Greek, Dutch)

Technical data:

– DC input: 24V
– 7″ LCD TFT screen
– LCD resolution 1024 x 600 (RGB)
– Micro SD card slot: SDHC format, – Memory size 8–32 GB, Speed class: Class4 – Class10
– Memory capacity: 100 images (video entryphone internal memory). With micro SD card: 1000 images, 128 videos.
– Dimensions (mm) 188.8 (L) x 113.6 (H) x 14.9 (D) (without wall support) 188.8 (L) x 113.6 (H) x 18.4 (D) (with wall support)

Power supply unit

Depending on the version, to power the system, the Kit includes a multi-plug power supply unit or a power supply unit for DIN rail; see the following pages for the technical characteristics.

Video entryphone

VIMAR K42917 Video Entryphone System - a3

1 Monitor
2 Indicator LED:

– White light = Power ON
– Red light = “Do not disturb” function enabled
– Flashing red light = New videos/photos in memory

3 Micro SD card slot
4 Microphone
5 Speaker
6 Connections:

– for power supply
– for bus (entrance panel/additional video entryphones)

Multi-plug power supply unit

(for applicable versions)

AC supply voltage: 100 V – 240 V, 0.8 A, 50 Hz / 60 Hz
DC output: 24V, 1A
Dimensions (mm): 43.5 (W) x 80.4(H) x 38.5 (D)
AU / EU / UK / US plug adapters

Multi-plug power supply unit technical data

(EU plug)
(AU plug)
(UK plug)
(US plug)

Power supply unit for DIN rail

(for applicable versions)

Technical characteristics:

– Power supply: 100 – 240 VAC 50/60Hz
– Maximum power consumption 0.8 A
– Dissipated power 3.5 W
– Output voltage (+/-) 24 VDC nominal (ES1 and/or SELV).
– Max. current output: 1 A
– Operating temperature -5 °C +35 °C (indoor)
– 3 x 17.5 mm modules, dimensions: 55x91x54 mm
– Symbol for CLASS II

Output
Input
DIN rail

Maximum distance between DC output of DIN power supply and video entryphone

Type of cable

|

Connection length

0,75 mm²| 15 m

Power supply for DIN rail: Possible installations

Installation on switchboard

VIMAR K42917 Video Entryphone System - c1

Installation on junction box

Wiring diagrams

Key for wiring diagrams

A1 – Apartment 1 video entryphone
A2 – Apartment 2 video entryphone
A3 – Apartment 3 video entryphone
A4 – Apartment 4 video entryphone
A1.2 – Apartment 1 additional video entryphone – indoor 2
A1.3 – Apartment 1 additional video entryphone – indoor 3
B – Power supply unit
C1 – 1 push button outdoor station
C2 – 2 push buttons outdoor station
C4 – 4 push buttons outdoor station
D – Distributor 42920.D
E – Additional lock push button
F – Electrical lock
G – NO/NC contact relay control
H – Additional power supply unit
L – Additional CCTV camera
M – Power supply unit for external CCTV camera

Notes:

The minimum cable length between two video entryphones must be 5m.
Multi-plug power supply unit: two forks are present, the red one should be connected to the 24V terminal and the black one to the GND terminal of the video entryphone.
In systems comprising two outdoor stations, if communication between an outdoor station and the video entryphone is already under way, in the case of a call from the other outdoor station, a busy signal (sequence of beeps) will indicate the need to wait for the system to be free.
When making the system connection, we advise against leaving terminations disconnected from the video door entry devices: every cable run without a termination could lead to interference.
Minimum conductor section

up to 50m (*)

|

up to 100m (*)

0.75 mm²

|

1 mm²

Distance between the outdoor entrance panel and the last indoor video entryphone
- One-family system (Bus Distributor not required)

VIMAR K42917 Video Entryphone System - d1

Apartment ID = 1
Device ID = Master
Apartment ID = 1
Device ID = Ext 1
Apartment ID = 1
Device ID = Ext 2

Multi-family system (max 4 apartments) – (Bus Distributor required)

VIMAR K42917 Video Entryphone System - d2

Apartment ID = 1
Device ID = Master
Apartment ID = 1
Device ID = Ext 1
Apartment ID = 1
Device ID = Ext 2
Apartment ID = 2
Device ID = Master
To apartment 3
To apartment 4

Electrical lock connection

Additional lock push button
Electric lock
• Max 12 V – 1.1 A
BUS

Maximum length for connections to powered lock and relay: 30m;
towards door release button: 10 m
- Additional lock push button connection
1. Additional lock push button
2. Electric lock
3. BUS
- Maximum length for connections to powered lock and relay: 30m;
  towards door release button: 10 m

• Relay connection

Auxiliary service power supply unit
Auxiliary service (max 12 VDC, 2 A)
BUS

Notes: Set the relay type (NO/NC) by means of the jumper (NO/NC).

Modalita NO Modalita NC
(normalmente aperto) (normalmente chiuso)

Maximum length for connections to powered lock and relay: 30m; towards door release button: 10 m

• CCTV camera connection (optional)

The Vimar 46CAM.136B.8 camera can be connected to the CCTV and GND terminals of the outdoor station.

Maximum length: 100 m with SYV75-3/RG59 cable.

Power supply unit for camera
Camera
BUS

Indoor Station Installation

We recommend you make an initial device configuration before connecting it to the system bus.
For the system to function correctly, each device must have its own unique address (ID).

The device ID and apartment ID can be checked by powering the individual indoor station before connecting it to the video door entry system.

Please also note that the video entryphones included in the one-family and two-family kits are preconfigured as Master units, whereas the optional video entryphones are preconfigured as Extension 1.

Once you have completed the previous steps, you can install and connect the devices to the apartment bus.
For a one-family system, the apartment bus can be connected directly to the outdoor station; in the case of multi-family systems (up to max 4 apartments) the apartment bus will have to be connected to the bus distributor and the bus distributor to the main outdoor station.
Once you have installed the Video entryphone, configure using icon [GENERAL] the CAM1, CAM2, CCTV1 and CCTV2 devices which can be consulted using icon .

Operation

Main screen

In standby mode, touching any part of the display will bring up the screen showing the device’s main functions.

Scrolling down on the arrow shown on the main screen accesses the mute and auto record settings.

Scrolling horizontally access the device settings.

VIMAR K42917 Video Entryphone System - e5

Notes regarding mute and auto record settings:

Scrolling down on the arrow shown on the main screen accesses the following settings:

For enabling/disabling “Mute” function ( icon).
For enabling/disabling auto record on panel call and selecting the mode ( , , icons).

| Automatic image capture
---|---
| Automatic video recording
| Record function deactivated (grey icon)

Self-start function

By pressing the [Camera] icon icon on the main screen, the camera will activate and the video entryphone will display the image from the speech unit.

Operation: Entrance panel call

When a visitor presses the call button on the entrance panel, an image of the visitor is displayed on the video entryphone screen and communication with the speech unit can be activated/deactivated by pressing the [Communication] icon .

VIMAR K42917 Video Entryphone System - e13

Meaning of the icons

| Capture a photo
---|---
| Record video
| Switch video signal from speech units and activated CCTV cameras.
| Activate or deactivate communication
| Electric door lock control
| Automatic door opening (relay activation)
| Adjust the display parameters (brightness, colour, contrast) and volume
| Return to [Main screen]

Intercom function

Press the [Intercom] icon on the main screen, select the indoor unit you want to call, then press the [Communication] icon to start the call.

Multimedia – Archiving images and videos

Provided that a micro SD card is inserted, the video entryphone can record images and videos. Without a micro SD card, the monitor can only capture images.

Maximum capacity with micro SD card: micro SD card: 1000 images and 128 videos

Video entryphone internal memory: 100 images

When the memory is full, the oldest pictures or videos will be overwritten.

Viewing images and videos

Press the [Photo] icon or [Video] icon on the main screen to review stored images and videos. In the photo and video list, a red dot indicates that images/videos have not yet been displayed.

Notes:

The micro SD card must be formatted from the video entryphone before use ( icon)
The kit does not include a micro SD card

Main settings

VIMAR K42917 Video Entryphone System - e24

| [Melody] Designed to set the melody and ringtone duration for calls from outdoor stations and intercom calls.
---|---
| [Mute] For enabling/disable the mute function and setting the time interval for “Do not disturb” mode.
| [Address] Designed to enable/disable the receipt of intercom calls and set the video entryphone ID: apartment ID (1, 2, 3, 4) and device ID (Master, Ext 1 e Ext 2).
| [General] Allows the relay activation time to be set between minimum 0.5 s and maximum 10 s. Menu for activating video input signals.
| [Language] For setting the monitor display language.
| [Date] For setting the monitor display date and time and selecting the date format.
| [Memory] For deleting all images or videos in the micro SD or flash card, copying all images from the internal flash memory to the micro SD card and formatting the Micro SD card.
| [Restore] For restoring the initial system settings (except for the date, time and ID address)

Privacy Policy

As required by Regulation (EU) 2016/679 on the protection of personal data, Vimar S.p.A. guarantees that the electronic processing of data minimises the use of personal and other identification information, which is only processed to the extent strictly necessary in order to achieve the purposes for which it was collected. The personal information of the Data Subject is processed in accordance with the product/ application privacy policy available on our website www.vimar.com in the legal section (Product – App Privacy Policy).
Please remember that, pursuant to Regulation (EU) 2016/679 on the protection of personal data, the user is the controller of processing for the data collected during use of the products and, as such, is responsible for adopting suitable security measures that protect the personal data recorded and stored, and avoid its loss.
Should the camera monitor public areas, it will be necessary to display – in a visible manner – the information about the ‘area under video surveillance’ envisaged in the privacy policy and specified on the website of the Italian Data Protection Authority (Garante). The recordings may be stored for the maximum period of time envisaged by legal and/or regulatory provisions in the place where the camera has been installed. If the regulations in force in the country of installation envisage a maximum storage period for the image recordings, the user shall ensure they are deleted in compliance with the applicable regulations.
In addition, the user must guarantee safe possession of and control over its passwords and the related access codes to its web resources. The Data Subject must provide the password for access to its system when requesting help from the Vimar Support Centre, so that the related support can be provided. Provision of the password represents consent for processing. Each Data Subject is responsible for changing the password for access to its system on completion of the work carried out by the Vimar Support Centre.’

Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.

Regulatory compliance.
LV Directive. EMC Directive.
Standards EN 55032, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 62368-1, EN IEC 63000.
REACH (EU) Regulation no. 1907/2006 – art.33. The product may contain traces of lead.

WEEE – Information for users. If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m2 , if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.
For further information see www.vimar.com website