PHOENIX CONTACT 2863119 IB IL 24/48 DOR 2/W-PAC Relay Module Owner’s Manual

: September 6, 2024
: PHOENIX CONTACT

Table of Contents

PHOENIX CONTACT 2863119 IB IL 24/48 DOR 2/W-PAC Relay Module
Product Description
Dimensions
System properties
Electrical properties
Connection data
Environmental and real-life conditions
Drawings
Classifications
Environmental product compliance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHOENIX CONTACT 2863119 IB IL 24/48 DOR 2/W-PAC Relay Module

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid.
Inline, Relay terminal, Relay outputs: 2 (floating), Changeover contact, 24 V AC, 48 V DC, for switching ohmic loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field.

Product Description

The terminal is designed for use within an Inline station. It has two floating SPDT relay contacts, which are independent of one another.
Your advantages

2 relays
Floating connections for 2 actuators

Commercial data

Item number	2863119
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DR01
Product key	DRI133
Catalog page	Page 133 (C-6-2019)
GTIN	4017918939229
Weight per piece (including packing)	81.74 g
Weight per piece (excluding packing)	63 g
Customs tariff number	85389099
Country of origin	DE

Dimensions

Dimensional drawing|
---|---
Width| 12.2 mm
Height| 119.8 mm
Depth| 71.5 mm
Note on dimensions| Housing dimensions

Notes

Note on application	Only for industrial use

Interfaces
Inline local bus

Number of interfaces	2
Connection method	Inline data jumper
Transmission speed	500 kbps

System properties

Module

ID code (dec.)	189
ID code (hex)	BD
Length code (hex)	C2
Length code (dec)	194
Process data channel	2 bit
Input address area	0 bit
Output address area	2 bit
Register length	2 bit
Required parameter data	3 Byte
Required configuration data	4 Byte

Output data
Relay

Number of outputs	2 (floating)
Connection method	Spring-cage connection
Contact switching type	Changeover contact
Switching voltage	min. 10 mV (DC)
---	---

max. 30 V AC (PELV (EN 61131))
max. 60 V DC (PELV (EN 61131))
Switching current| min. 10 µA
max. 2 A (30 V DC)
max. 1 A (60 V DC)
Switching capacity| 60 W
62 VA (ohmic)
Limiting continuous current| 2 A (at maximum ambient temperature)
Mechanical service life| 2x 105 cycles

Product properties

Product type	I/O component
Product family	Inline
Type	modular
Scope of delivery	including Inline connector and labeling field
No. of channels	2
Operating mode	Process data mode with 2 bits
Special properties	for switching ohmic loads

Data management status

Article revision	05

Insulation characteristics

Overvoltage category	II (IEC 60664-1, EN 60664-1)
Pollution degree	2 (IEC 60664-1, EN 60664-1)

Electrical properties

Potentials: Communications power (UL)

Supply voltage	7.5 V DC (via voltage jumper)
Current draw	max. 30 mA
Power consumption	max. 0.23 W

Potentials: Segment circuit supply (US)

Supply voltage	24 V DC (via voltage jumper)
Supply voltage range	19.2 V DC … 30 V DC (including all tolerances, including

ripple)
Current draw| max. 4 A

Electrical isolation/isolation of the voltage ranges

Test voltage: Relay contact / Bus logics	1.5 kV, 50 Hz, 1 min.
Test voltage: Contact/contact	1 kV, 50 Hz, 1 min.
Test voltage: Contact/functional ground	1 kV, 50 Hz, 1 min.

Connection data

Connection technology

Connection name	Inline connector

Conductor connection

Connection method	Spring-cage connection
Conductor cross section rigid	0.08 mm²….. 1.5 mm²
Conductor cross section flexible	0.08 mm²….. 1.5 mm²
Conductor cross section AWG	28 … 16
Stripping length	8 mm

Inline connector

Connection method	Spring-cage connection
Conductor cross section, rigid	0.08 mm²….. 1.5 mm²
Conductor cross section, flexible	0.08 mm²….. 1.5 mm²
Conductor cross section AWG	28 … 16
Stripping length	8 mm

Environmental and real-life conditions

Ambient conditions

Ambient temperature (operation)	-25 °C … 55 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa … 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa … 106 kPa (up to 3000 m above sea

level)
Ambient temperature (storage/transport)| -25 °C … 85 °C
Permissible humidity (operation)| 10 % … 95 % (non-condensing)
Permissible humidity (storage/transport)| 10 % … 95 % (non-condensing)

Standards and regulations

Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting type	DIN rail mounting

Drawings

Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2863119

Classifications

ECLASS

ECLASS-11.0	27242604
ECLASS-12.0	27242604
ECLASS-13.0	27242604

ETIM

ETIM 9.0	EC001599

UNSPSC

UNSPSC 21.0	32151600

Environmental product compliance

EU RoHS

Fulfills EU RoHS substance requirements	Yes
Exemption	7(c)-I

China RoHS

Environment friendly use period (EFUP)	EFUP-50

An article-related China RoHS declaration table can be found in the download area for the respective article under “Manufacturer declaration”. For all articles with EFUP-E, no China RoHS declaration table issued and required.

EU REACH SVHC

REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Accessories

IB IL SCN-8 – Inline connector
Connector, for digital 1, 2 or 8-channel Inline terminals

IB IL FIELD 2 – Marking field
Marking field, width: 12.2 mm

ESL 62X10 – Insert strip
0809492
https://www.phoenixcontact.com/us/products/0809492

Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, CMS-P1-PLOTTER, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72

Phoenix Contact 2024 © – all rights reserved
https://www.phoenixcontact.com

Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com