SAL SMS806WF Mantis Multi Function Sensor User Guide
- June 15, 2024
- SAL
Table of Contents
SAL SMS806WF Mantis Multi Function Sensor
Product Information
Specifications
- Model No.: SMS806WF
- Input (V)/(Hz): 240/50
- Detection Motion Speed: 0.6~1.5 (m/s)
- Max. Detection Range: 18m (SMS806WF) / 15m (SMS806WF/BK)
- IP Rating: IP66
- Sensor Type: PIR or PE
- Mounting: Ceiling or wall
- Color: Grey (SMS806WF) / Black (SMS806WF/BK)
Product Usage Instructions
MANTIS SMS806WF
Multifunction PIR Sensor with photocell and override functions – surface mount IP66
Application
The MANTIS SMS806WF is a multifunction PIR sensor with photocell and
override functions. It is designed for versatile residential and commercial
sensor applications. Versatile residential and commercial sensor applications
Design Specifications
- Dimensions: 140mm x 75mm x 115mm
- IP Rating: IP66
- Mounting: Surface mount
- 3 wire design for interior or exterior use in a choice of GREY or BLACK
- Selectable dusk to dawn (PE) or motion sensor control functions
- Manual override function
- Sensitivity, time, light level or PE cell adjustments can be set manually or via the optional remote control
- Maximum loads (LED) 500W, (CFL) 1000W,(Halogen) 2000W
- Detection angle 110° up to 18 metres at a height of 1.8 – 2.5hm (Black model detection range 15 metres).
- The controller (SMS806WF/RC) contains batteries and is designed for trade use only.
Dimensions
Detection range
Technical Specifications
Model No.| Input
(V)/(Hz)| Detection
Motion Speed| IP
Rating| Sensor
Type| Mounting| Colour
---|---|---|---|---|---|---
SMS806WF| 240/50| 0.6~1.5 (m/s)| IP66| PIR or PE| Ceiling or wall| Grey
SMS806WF/BK| 240/50| 0.6~1.5 (m/s)| IP66| PIR or PE| Ceiling or wall|
Black
Installation
- Ensure that the selection dials are facing down before installation.
- Choose a suitable location for mounting the sensor on either the ceiling or wall.
- Securely attach the sensor using appropriate screws or mounting brackets.
Usage
The MANTIS SMS806WF is equipped with a detection range of 18m (SMS806WF) or
15m (SMS806WF/BK). It can detect motion speeds ranging from 0.6 to 1.5 m/s.
When the sensor detects motion, it will trigger the desired action, such as
turning on lights or activating an alarm system. The photocell function allows
the sensor to detect ambient light levels and adjust its sensitivity
accordingly. The override function allows manual control of the sensor’s
operation, overriding its automatic detection and enabling continuous
operation.
SENSOR SMS751ELV
Microwave ELV motion corridorSTANDBY sensor IP20
Application
Versatile microwave corridorSTANDBY sensor. SAL factory fitted sensor option
for approved products only, not for individual sale
Design Specifications
- Power source input: 12-24V DC, output 0-10V DC, 30mA sinking current
- Detection radius max 8m, angle 360°, max 2.5hm
- Power consumption <0.5W
- HF system: 5.8GHz
Wiring Diagram
Dimensions
Technical Specifications
SENSOR SMS761
Daylight harvesting sensor IP20
Application
Innovative recessed daylight harvesting sensor
Design Specifications
- Operating voltage: 1-10Vdc
- Maximum quantity of connected devices is 30 or a maximum current sink of 50mA
- Dimming range: 1%~100%
- Colour coding of cable: Red+, Black-
- Cable length: 80cm
- Detection angle: 90°
Wiring Diagram
Dimensions
Technical Specifications
Check out the HIGHBAY section of this catalogue for a range of super low profile dimmable LED highbays with sensor control; ideal for commerical or industrial warehouse spaces.
SENSOR SMS803CD
Infrared occupancy sensor, surface or recessed
Application
Recessed or surface mount infrared interior sensor
Design Specifications
Switched power 2000W incandescent, 600W Fluorescent, 300W LED
- Standby power <1W
- Detection distance Max. Ø 18 m at 3hm, detection angle 360°
- Duration Time / 10sec / 40min adjustable
- Dusk to Dawn adjustable
Manual override mode
When the lamp(s) is switched on, turn the lamp(s) off/on twice within 3 seconds, the sensor will go to an 8 hour override mode, during which the lamp(s) will stay on. The sensor will then return to normal detection mode. During override mode, turn the lamp(s) on/off twice within 3 seconds or turn off the lamp(s) for over 10 seconds, the sensor will return to normal detection mode
Dimensions
Detection range
Technical Specifications
SENSOR SMS804CR
Infrared sensor – recessed
Application
Versatile IP20 recessed sensor designed for residential and commercial
applications
Design Specifications
- Switched power 2000W incandescent, 500W fluorescent, 300W LED
- Standby power <1W
- Detection distance Max. Ø 9m at 3hm
- Detection angle 360°, Duration Time / 10sec / 4min adjustable
- Dusk to Dawn adjustable
Manual override mode
- When the lamp(s) is switched on, turn the lamp(s) off/on twice within 3 seconds, the sensor will go to an 8 hour override mode, during which the lamp(s) will stay on. The sensor will then return to normal detection mode.
- During override mode, turn the lamp(s) on/off twice within 3 seconds or turn off the lamp(s) for over 10 seconds, the sensor will return to normal detection mode
Dimensions
Detection range
Technical Specifications
SENSOR SMS805CS
Infrared sensor – surface mount
Application
IP20 surface mount sensor designed for residential and commercial spaces
Design Specifications
- Switched power 1600W incandescent, 500W fluorescent, 200W LED, colour white
- Standby power <1W
- Detection distance Max. Ø 12m at 3hm
- Detection angle 360° , Duration Time / 10sec / 4min adjustable
- Dusk to Dawn adjustable
Manual override mode
- When the lamp(s) is switched on, turn the lamp(s) off/on twice within 3 seconds, the sensor will go to an 8 hour override mode, during which the lamp(s) will stay on. The sensor will then return to normal detection mode.
- During override mode, turn the lamp(s) on/off twice within 3 seconds or turn off the lamp(s) for over 10 seconds, the sensor will return to normal detection mode
Dimensions
Detection range
Technical Specifications
SENSOR SMS807CR
PIR Sensor – recessed mount, 40mm cut-out
Application
Versatile residential and commercial sensor
Design Specifications
- Switched power 800W incandescent, 400W fluorescent, 300W LED
- Standby power <0.5W
- Detection distances: Max. Ø 6.0m at 4.0hm. Max. Ø 4.0m at 2.2hm.
- Detection angle 360°,
- Adjustable time delay Min. 10sec / Max. 7min
- Adjustable light (lux) sensitivity <10 – 2000 lux
- Manual override function, low profile white design, Ø 40mm cut-out
Manual override mode
- When the lamp(s) is switched on, turn the lamp(s) off/on twice within 3 seconds, the sensor will go to an 8 hour override mode, during which the lamp(s) will stay on. The sensor will then return to normal detection mode.
- During override mode, turn the lamp(s) on/off twice within 3 seconds or turn off the lamp(s) for over 10 seconds, the sensor will return to normal detection mode
Detection range
Technical Specifications
So what is the difference between MW, IR or PIR sensors?
Microwave sensors detect motion by projecting microwaves, which bounce off
surfaces and returns the signal to the controlling sensor; IR sensors emit in
order to identify heat or movement of an object measuring only infrared
radiation and a PIR sensor measures infrared light radiating from objects in
its field of view.
- SAL National Pty Ltd – 40 Biloela St, Villawood NSW 2163
- Tel: + 61 2 9723 3099
- Website: www.sal.net.au
- Email: info@sal.net.au
- VICT/TAS – 46/48 Keys Road Moorabbin VIC 3189
- Tel: + 61 3 9532 3168
- Email: info@sal.net.au
- QLD – 36 Whitelaw Place Richlands QLD 4077
- Tel:+ 61 7 3879 5999
- Email: info@sal.net.au
- SA/NT – Unit 1, 9 Alfred Avenue Beverley SA 5009
- Tel: +61 8 7084 1958
- Email: info@sal.net.au
- WA – 29 Beringarra Avenue Malaga WA 6090
- Tel: +61 8 9248 7458
- Email: info@sal.net.au
FAQ
-
Q: What is the IP66 rating for?
A: The IP66 rating indicates that the sensor is protected against dust and powerful water jets, making it suitable for both indoor and outdoor use. -
Q: Can the MANTIS SMS806WF be used in residential settings?
A: Yes, the MANTIS SMS806WF is designed for versatile residential and commercial sensor applications. -
Q: How do I adjust the detection range of the sensor?
A: The detection range of the sensor is fixed and cannot be adjusted. -
Q: Can I manually control the sensor’s operation?
A: Yes, the MANTIS SMS806WF has an override function that allows manual control of its operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>