Meian G01-ZB Smart Wireless Gateway Instructions

June 14, 2024
Meian

Meian G01-ZB Smart Wireless Gateway

Meian G01-ZB Smart Wireless Gateway

Product Brief

This intelligent gateway uses wireless Zig Bee technology to interact with products such as intelligent interactive terminals. The wireless Zig Bee technology has the characteristics of low complexity, short delay, low power consumption, low rate, and large network capacity, which guarantees the safety and reliability of the product. The appearance of this product is simple and elegant, and the operation is simple and convenient. After accessing the network, it can be controlled remotely through the mobile phone APP.
Product Brief

Specifications

Product No. G01- ZB
Operating Voltage AC90-240V 50 ~ 60Hz alternating current
Working current < 1A
Working frequency 2.4GHz
Communication method Zigbee + WiFi
Wireless techno logy Zigbee 802.15.4+WiFi 802.11 b/g/n
Transmit power Max 20dBm(WiFi)/19dBm(Zigbee)
Wireless distance Indoor 30~50m
Maximum number of connections Max Mode=50
Working environment Temperature -1 0°C ~ +55°C, Humidity:s95%RH, No

condensation
Applicable place| Indoor
Size| cp80*H50.5mm

Light instructions

Blue LED light Meaning
Instructions Zigbee status
Flashing Allow child devices to access the network
Long bright Inactivated
Light off Activated

APP download and use

Users please scan t he following QR code or download and install the “Tuya Smart” APP in the mobile application market, and register for use after the installation is complete.

QR-Code|
---|---

Internet access settings

  • a. Turn on t he Bluetooth of the mobile phone and ensure that the mobile phone is connected to the WiFi in the 2.4GHz band;
  • b. Power on the gateway:
  • c. Open the homepage of Tuya Smart APP, cl ick “+”-“Add Device” in t he upper right corner, and wait for the APP to discover the device. If the device has not been found, press and hold the gateway function reset button for 10 seconds, and complete the reset operation according to the prompt tone.
  • d. Click the discovered gateway icon – click the “+” sign next to “Meian Multimode Gateway”;
  • e. Enter t he current WIFI account password, click Next. and wait for the device to be added successfully before use.
    Reset WiFi: Press and hold the network button and follow the device voice prompts to complete the operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions:

  1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If t his equipment does cause harmful interference to radio or television reception,
    which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals