V-TAC VT-759-12 Wall Lamp Bridgelux Chip 4000k Black Squares Instruction Manual
- June 3, 2024
- V TAC
Table of Contents
VT-759-12 Wall Lamp Bridgelux Chip 4000k Black Squares
Instruction Manual
TECHNICAL DATA
Model| Watts| Lumens| Beam Angle
| Body Type| CRI| PF| Shape| Dimension| Input
Power
---|---|---|---|---|---|---|---|---|---
VT-759| 5| 700| 120°| Aluminium| >80| >0.5| Square| 100x100x100mm|
AC:220-240V,50Hz
VT-756| 5| 700| 120°| Aluminium| >80| >0.5| Round| 140x115x100mm|
AC:220-240V,50Hz
VT-759-12| 11| 1360| 120°| Aluminium| >80| >0.5| Square| 100x100x100mm|
AC:220-240V,50Hz
VT-756-12| 11| 1360| 120°| Aluminium| >80| >0.5| Round| 140x115x100mm|
AC:220-240V,50Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION INSTRUCTION
Step 1: Switch off the power before starting the installation.
Step 2: Release the base plate by unscrewing the set screws from the
sides of the luminaire by using an allen wrench (included). Fix the power
cable through the base plate, then drill the holes on the wall by using the
base plate as a guide. Fix the base plate to the wall using the plugs and
screws (included).
Step 3: Wire and connect the power cable to the terminal block.
Step 4: Mount the luminaire on the base plate using the set screws. Make
sure the set screws are properly fixed using the allen screws.
Step 5: Switch on the power to test the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR
NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Documents / Resources
|
V-TAC VT-759-12 Wall Lamp Bridgelux Chip 4000k Black
Squares
[pdf] Instruction Manual
VT-759-12 Wall Lamp Bridgelux Chip 4000k Black Squares, VT-759-12, Wall Lamp
Bridgelux Chip 4000k Black Squares, Bridgelux Chip 4000k Black Squares, Chip
4000k Black Squares, 4000k Black Squares
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>