Ingersoll Rand INSIGHTqcx Cordless Tool Controller User Guide
- June 4, 2024
- Ingersoll Rand
Table of Contents
INSIGHTqcx Cordless Tool Controller
User Guide
Product Information
Save These Instructions
Product Safety Information
Intended Use:
These Cordless Tool Controllers are designed to communicate process data and
signals between specific Ingersoll Rand equipment and compatible user
equipment such as PLCs, bar code scanners, and printers.
| Power Supply | Input Voltage | Output Voltage |
|---|---|---|
| 24V DC | 100-240 V — 50-60 Hz, 80 A Max. @ 240 V — | 24.0V DC, 2.1A |
For additional information, refer to Communication Module for Cordless Tools
Safety Information Manual 47114541, User Manuals 48619696 and 48619852.
This device conforms to UL STD. 60950-1 & 62368-1; certified to CSA STD.
C22.2 No. 60950-1 & 62368-1.
Manuals can be downloaded from ingersollrand.com
Product Specifications
Model Identification
| 
---|---
| 
| 
RADIO FREQUENCY (RF) EQUIPMENT DECLARATION OF CONFORMITY
The declarations provided below pertain to the RF devices contained in the
Ingersoll Rand product.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
MPE/SAR/RF exposure information:
This device was verified and found to comply with FCC Part 1.1310 and IC RSS-102 Issue 5 RF exposure requirements set forth for an uncontrolled environment.
WARNING
- While this device is in operation, a separation distance of at least 20 cm (8 inches) or more must be maintained between this device and persons during normal operation.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Ingersoll Rand Industrial Technologies
800-A Beaty Street, Davidson, NC 28036
Phone: 704-896-4000
Declaration of Conformity
Table 1. Declaration of Conformity Requirement
| 1 | Date of Issue | September-22 |
|---|---|---|
| 2 | Manufacturer Name and Address | Ingersoll Rand Industrial Ireland Ltd. / |
Lakeview Dr, Swords, IE
3| Object of Declaration| Cordless Tool Controller (*model) QCXD1 and QCXM2
Serial Number Range: K22.1010001 –> K30M319999
4| Directive(s) Conformity| 2006/42/EC (Machinery), 2014/30/EU (EMC),
2014/35/EU (LVD),
2014/53/EU (RED), 2011/65/EU (RoF15), and 2012/19/EU (WEEE)
S| Standard(s) Compliance| EN 60335-1:2012+A2:2019, EN IEC 62368-1:2018, EN
IEC 61010-1:2010/AMD1:2016/COR1:2019, EN 61000-6-4:2007+A1:2011, EN IEC
61000-6-2:2019, EN IEC 61000-3-2:2019+A1:2021,
EN 61000-3-3:2013+A1:2019, EN IEC 61000-4-2:2008, EN IEC 61000-4-3:2020,
EN IEC 61000-4-4:2012, EN IEC 61000-4-5:2014+AMD1:2017, EN IEC 61000-4-6:2013,
EN IEC 610004-11:2020, and EN 50581:2012
6| Tech File Author Name (EU) Title/Position| Alexis Flipo
Product Engineering Manager
7| Declaration Author Name Title/Position| John Linehan
Global Electric Portfolio & Electrical Engineering Leader
This declaration is issued on this day [1] under the sole responsibility of
the manufacturer [2]. The object of the declaration [3 Model/Serial Number
Range] is in conformity with the provisions of the directive(s) [4] as shown
by compliance with the harmonized standard(s) [5]. The technical
documentation, available at the above address [2], is
compiled by [6] and this declaration is approved by [7].
Year of Manufacture
Figure 1. Year of Manufacture Code
Year (20 )| Month: A=January B=February C=March D=April E=May F=June G=July
H=August J=September K=October L=November M=December
---|---
*Models: QCXD1 and QCXM2
| QCXD1 | QCXM2 |
|---|---|
| QCXD11 | QCXM11 |
| QCXD11-F | QCXM11-F |
| QCXD11-M | QCXM11-M |
| QCXD11-FM | QCXM11-FM |
| QCXD12 | QCXM12 |
| QCXD12-F | QCXM12-F |
| QCXD12-M | QCXM12-M |
| QCXD12-FM | QCXM12-FM |
| QCXD13 | QCXM13 |
| QCXD13-F | QCXM13-F |
| QCXD13-M | QCXM13-M |
| QCXD13-FM | QCXM13-FM |
| QCXD15 | QCXM15 |
| QCXD15-F | QCXM15-F |
| QCXD15-M | QCXM15-M |
| QCXD15-FM | QCXM15-FM |
ingersollrand.com
© 2022 Ingersoll Rand
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>