OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit Installation Guide

June 4, 2024
OPT7

OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit

Aura Wheel Well RGB LED Kit with Wireless Remote Lighting
Kit

MAIN COMPONENTS

Main Components

INSTALLATION

STEP 1
Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location.
OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

As shown below, connect all light pods to the control box with the included extension cables.

OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.

OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

or connect the positive wire to the fuse tap and connector the open negative wire to a ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.

OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

| WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will not exceed 85C or 185F.
---|---

STEP 2
Secure Control box in desired location with Velcro or zipties.
OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and securely hidden from exposing elements of moisture.

STEP 3
Secure the light strips using the zip ties to tie all the wiring away from the moving components.
OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.

STEP 4
Using the included E-Z Remote, select your desired color or pattern.
OPT7 Aura Wheel Well RGB LED Kit with Wireless Remote Lighting Kit
Installation

AUX WIRING FOR A DOME/DOOR LIGHT

NOTE: This feature activates white light only.
In order to activate Door Assist Sync, you need to connect the aux wiring of Aura control box to the positive and negative wiring of dome or door light.

OPTIONAL UPGRADE

Optional Upgrade

Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box.
All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS & Android Compatible).

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

NEED SUPPORT?

QR-Code

Scan for tutorial videos, troubleshooting tips, and more.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals