JONSBO CR1000 EVO Series ARGB 4 HeatPipe Tower CPU Radiators User Manual
- June 15, 2024
- JONSBO
Table of Contents
JONSBO CR1000 EVO Series ARGB 4 HeatPipe Tower CPU Radiators
Part List
- A. GPI heatsink
- B. Backplate -Intell
- C. Spacer -Intel
- D. Mounting bracket
- E. Screw – Intel
- F. Thermal Paste
- G. Spacer -AMD
- H. Screw – AMD
Intel Installation
STEP 1
Install the backplate to the motherboard and fix it with spacers
STEP 2
Install the mounting brackets and secure with screw
STEP 3
Applying the thermal paste on CPU evenly, and remove the protection film
from copper base.
STEP 4
Place the cooler on the CPU while aligning the screws to the backplate
mounting points, secure with screwdriver.
STEP 5
Connect the fan lead to the main board as shown in the figure above
AMD Installation
STEP 1
Remove the plastic retainer of the AMD retention module, place the existing
backplate back to MB
STEP 2
Installation of AMD spacer column
STEP 3
Install the mounting brackets and secure with screw
STEP 4
Applying the thermal paste on CPU evenly, and remove the protection film
from copper base
STEP 5
Place the cooler on the CPU while aligning the screws to the backplate
mounting points, secure with screwdriver.
STEP 6
Connect the fan lead to the main board as shown in the figure above
JONSBO Technology Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City,Guangdong
Province, 523651, China
© 2022 JONSBO Technology Co., Ltd. All right reserved. Specifications are
subject to change without prior notice. Some trademark may be claimed as the
property of others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>