CANARMNA IWF740B01 Light Fixture Instructions
- June 15, 2024
- CANARMNA
Table of Contents
CANARMNA IWF740B01 Light Fixture
Product Information
Specifications:
- Model: IWF740B01
- Date: 10/20
- Power Source: Electrical
- Required Tools: Phillips Screwdriver, Wire Cutters
- Product Dimensions: Not specified
- Weight: Not specified
Important Safety Instructions
- Turn off electrical power before starting the installation of the light fixture.
- Use wiring supplies as required by local electrical code.
- This product must be installed by the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.
Installation Instructions
Electrical:
- Attach the nipple to the Easy ConnectTM mounting bracket. Adjust it so that it will clear the hole in the back of the fixture and then lock the nipple in place with the hex nut.
- Attach the mounting bracket to the electrical box with electrical box screws (not included).
- Connect (push) the electrical wires from the fixture into the correct inserts.
- Once the connections of wires are completed, carefully tuck the wires and wire nuts into the electrical box, making sure no bare wire (on the black and white) is visible at the wire nuts.
- Secure the fixture to the nipple by tightening it with the star washer and hex nut. Screw the finial to the nipple. For Option 2: If there are multiple green (ground), black (live), and white (neutral) wires joined in the electrical box V (house wiring), attach a single green, black, and white jumper wire before connecting. Strip 7mm from a 6 in. jumper wire supplied. Then connect (push) the wires into the correct inserts.
- Remove the spinner nut from the socket. Position the glass on the lamp and secure it with the spinner nut.
- Install the proper bulb type and wattage (not included).
FAQ
-
Q: What tools do I need for installation?
A: You will need a Phillips screwdriver and wire cutters. -
Q: Can I clean the fixture while it is powered on?
A: No, you must turn off the power, wait for it to cool, and then clean the fixture with a clean, soft cloth. -
Q: How do I connect multiple wires in the electrical box?
A: For Option 2, you need to attach a single green, black, and white jumper wire before connecting them. Strip 7mm from a 6 in. jumper wire supplied and then push the wires into the correct inserts. -
Q: What type and wattage of bulb should I use?
A: The proper bulb type and wattage are not included with the product. Please refer to the product specifications or consult a lighting professional for the appropriate bulb. -
Q: How can I contact customer support?
A: You can reach our customer support team at Tel: 613-342-5424 or Fax: 800-263-4598.
INSTALLATION INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED
SAFETY PRECAUTIONS
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE : Product may not look exactly as shown in figures.
INSTALLATION
- Attach nipple to mounting bracket. Adjust so it will clear hole in back of fixture and then lock nipple in place with hex nut. Attach mounting bracket to electrical box with electrical box screws (not included).
- Option 1: Connect (push) electrical wires from electric box (house wiring) into correct inserts. Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring), attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from a 6 in. jumper wires supplied. Then connect (push) wires into the correct inserts.
- Connect (push) electrical wires from fixture into correct inserts.
- Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
- Secure the fixture to the nipple tightening by star washer and hex nut. Screw the finial to the nipple.
- Remove spinner nut from socket. Position the glass on lamp and secure with spinner nut.
- Install proper bulb type and wattage (not included).
Tel : 613-342-5424,
Fax : 800-263-4598
NEED HELP?
Call or Email us first
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>