GOODSCITY GC-181 Garment Steamer for Clothes User Manual

: August 14, 2024
: GOODSCITY

Table of Contents

GOODSCITY GC-181 Garment Steamer for Clothes
GENERAL SAFETY GUIDELINES
SPECIFICATIONS
PRODUCT PARTS
PRODUCT ACCESSORIES
PRODUCT INSTALLATION
HOW TO IRON
PRODUCT MAINTENANCE
TROUBLESHOOTING
WARRANTY & SUPPORT
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GOODSCITY GC-181 Garment Steamer for Clothes

Specifications:

Product Name: Professional Standing Garment Steamer (GC 181)
Exit Steam Temperature: 98°C
Steam Rate : About 32g/min (max)
Telescopic Pole Min Length: 50.5cm
Telescopic Pole Max Length: 129cm
Rated Voltage: 220V
Rated Frequency : 50Hz
Rated Power(W): 2000W
Water Tank Capacity: 1700ml
Steam Hose Length: 130cm

Product Parts:

A. Steam Nozzle
B. Hook on Hanger
C. Hanger
D. Ironing Board
E. Steam Hose

Product Installation:

Assembling the Support Pole: Take out the machine and accessories. Insert the support pole into the hole on the machine body until it reaches the bottom.
Assembling the Hanger: Insert the hanger into the top of the support pole and fix the small AL pole into the hanger.

How to Iron:
Iron the main part of the clothes, gently holding the lower hem by hand to flatten the wrinkled areas. Use hot steam to iron out the rippled fibers.

GENERAL SAFETY GUIDELINES

Please read this manual carefully before using a steamer.
Please keep the manual safe for future reference.
To avoid the risk of electric shock, do not immerse the equipment in water or use it in damp conditions.
While plugging or unplugging a power cord, hold it by the plug. Never pull it by the cord.
Do not operate a steamer with a damaged power cord.
Verify the voltage at your home and ensure it matches the steamer’s specified voltage before switching it on.
Garment steamers are intended for household use only. Do not use them for commercial purposes.
Do not connect the equipment to an extension cord or multiple-socket adaptor; always connect the unit directly to the main socket. This is to prevent short circuits and sparking, which can shorten the life of the unit.
The units can be cleaned with a damp cloth and Immediately wiped dry. Do not use detergents or chemical cleaning agents to clean the unit.
This appliance is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance. Warning: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
Do not leave the steamer on while working on other things, especially when children are around.

SPECIFICATIONS

Product Name: Professional Standing Garment Steamer (GC 181)
Exit Steam Temperature : 98 C
Steam Rate: About 32g/min (max)
Telescopic Pole Min Length : 50.5cm
Telescopic Pole Max Length : 129cm
Rated Voltage : 220V
Rated Frequency : 50Hz
Rated Power(W): 2000W
Water Tank Capacity : 1700ml
Steam Hose Length: 130cm

PRODUCT PARTS

A. Steam Nozzle
B. Hook on Hanger
C. Hanger
D. Ironing Board
E. Steam Hose
F. Flat Ironing Nozzle Hanger
G. Aluminum Tube
H. Clip on Aluminum Tube
I. Switch Knob
J. Body
K. Power Cord
L. Drain Outlet Knob
M. Water Outlet Knob

PRODUCT ACCESSORIES

The product includes the machine body (including a water tank), ironing brush, hanger, small hanger pants clip, telescopic pole, trousers clip, small ironing tool, glove, and ironing board.

PRODUCT INSTALLATION

Assembling the Support Pole
Take out the machine and accessories. Take out the support pole and insert it into the hole on the machine body until it reaches the bottom.
Assembling the Hanger
Insert the hanger into the top of support pole. And fix the small AL pole into the hanger.
Adjust the height of support pole
Release the clip in the support pole adjust the support pole into need height and fasten the clip.
Assembling the Iron brush
Take out the ironing brush, align the plug of the ironing brush with the corresponding hole on the machine body, and insert it. Tighten it clockwise. After using, please remove the ironing brush.
Assembling the brush or Pants line clip
Take out the ironing brush, align the plug of ironing brush with and insert it into the corresponding hole on machine body and tighten it clockwise. After using, please remove the ironing.
Assembling the iron board
Insert the tube at the back of the ironing board into the holes of the hanger, allowe the iron to be fixed onto the hanger. Take the hook in. Take the ironing board out. During the ironing process, the iron brush can be placed onto the hook. Insert the tube at the back of the ironing board into the holes of the telescopic tube to support the ironing board correctly.

HOW TO IRON

Stand the machine assembled on a flat and stable floor. Adjust the height and spread range of the hanger as required and hang the clothes on it. Ensure there is enough water in the water tankand the tank is located properly. Plug the plug into the power socket, turn on the power switch and let the machine preheat for about 35 seconds, wait for steam from the ironing brush.
Warning: When the ironing brush shakes or moves from side to side, water beads may appear on the handle of the ironing brush (risking scalding).
Iron the main part of the clothes, gently holding the lower hem by hand to flatten the wrinkled areas. Use hot steam to iron out the rippled fibers (as shown in Picture 2).
Press the metal panel of the ironing brush gently onto the clothes, moving the brush up and down at a speed that allows the steam to penetrate the fibers appropriately for effective hot forming.
After ironing the main part, proceed to ironing specific sections from top to bottom. When ironing the collar, fold the entire collar back, grasp one end with your hand and move the iron horizontally. Be cautious of the hot steam, as shown in Picture 3.
When ironing the sleeves, pull the sleeves straight and move the ironing brush along the sleeves, as shown in Picture 4.
When ironing the lower hem of clothes, hold one side of the garment, prop up the lower hem with the extension pole, and move the ironing brush horizontally, as shown in Picture 5.
After ironing the front of the clothes, turn them over to iron the back.
When ironing the collar of the garment, please use the small iron tool to make the collar stiffer, as shown in Picture 6.
Use the button at the back of the ironing board to fix it on the hanger. Take the hook in the ironing board out so that, during ironing, the iron brush can be placed on the hook. Adjust the height of the telescopic poles to iron more efficiently on the ironing board. Additionally, the ironing board can be fixed on the telescopic tube to provide support during ironing, as shown in Picture 7.

Ironing Pants Line:
Remove the pants line clip, insert the metallic clasps at the bottom of the ironing brush into the plastic slot of the pants line clip, press down the handle to open the interface between the pants line clip and the ironing brush, clasp the pants line, and move the ironing brush gently up and down to make the pants line perfectly straight. The dismounting is in reverse order.

Warning : When the steam tube bends, it may emit a cooing sound. Water beads may appear on the steam holes, and the amount of steam will decrease significantly. In this case, lift the handle for 2-3 seconds; everything will be okay.

PRODUCT MAINTENANCE

Purified water is recommended to avoid contaminating the
textiles because the mineral content varies in different types
of water. Sediments may occur to varying extents when using
water of different qualities in the ironing machine, leading to
a reduction in steam flow, intermittent flow, or even complete
stoppage.
To better maintain the machine, it is recommended to clean or
perform maintenance after a certain period of use. We suggest
taking both steps together.

Cleaning the water tank:
Clean the water tank and tank filter every 1 month or when 20 liters of water are consumed. This period may be prolonged or shortened based on the actual water quality.

Unscrew the water tank cover counterclockwise.
Pour out any remaining water from the tank.

Heat clean instructions:
If a garment steamer is used at high temperatures for an extended period, it may produce calcium carbonate and salt powder scale. Over time, the scale can cause pipe blockage, increase the load on the heater, and affect the steamer’s performance. Specific signs of this issue include reduced steam output or complete cessation of steam spray. To ensure optimal performance of the garment steamer, it is recommended to regularly clean the steamer heater and remove the scale. In areas with soft water, it is advisable to clean the heater once every two or three months, based on half-hour daily usage. In areas with hard water, it is recommended to clean the heater once every one or two months.

Mix white vinegar and water in a 1:1 ratio and fill the tank.
Place the tank onto the machine, plug in the power cord and turn on the switch. Allow the machine to run for about 10 minutes.
After running for 10 minutes, turn off the power, unplug the machine, and remove the vinegar-water mixture.
Add water into the tank, lift up the machine, swing it around a few times, and then remove the water. Repeat this procedure several times until the residual scale and vinegar flavor are removed.

Storage:

Keep the machine in a dry, cool, and ventilated place, away from flammable and explosive objects.
Properly secure the hood of the connecting hole and pull out it when removing the ironing brush after completing the work. This precaution is essential to prevent water and dust from entering the connecting hole

TROUBLESHOOTING

ISSUE/FAULT	CAUSES/REASON	SOLUTION
	The power switch is not	Turn on the
	turned on	power switch
The socket is not	Connect to the power

The machine does

not working or the indicator light on the switch is not illuminated

| connected or plugged

in properly

| supply and ensure the

plug is plugged in thoroughly

Unfavorable socket connection| Check whether the power socket is functioning properly
Thermal fuse damaged| Ask a professional to check and repair

The indicator light is on but there is less, discontinuous or

no steam

| The water in the water tank does not reach the designed water level| Fill the water up to the designated water level
The water tank is not installed in the correct position| Install water tank in the correct position
Severe inflection in steam conduit| Straighten the steam conduit
The water does not flow into the boiler| Try to shake the water tank or replace it.
Water isn’t flowing into the boiler| Blockage in water intake| Wash the water intake
Water tank deformation| Used hot water| Replace the water tank

Water overflow in the water tank

| Cracking of the water tank| Replace the water tank
Seal ring breakage| Replace the relevant fittings

IMPORTANT!

The thermostat would maintain the temperature at a rated value by regulating the control current when the tank is low on water.
In the event of thermostat damage or failure, the hot fuse or protective device provides protection by cutting off the power supply to the machine body when it reaches a certain temperature.

WARRANTY & SUPPORT

Entitle yourself for the 1 year Goodscity warranty by registering your purchase and easily reach us to submit your product-related issues & queries, when you follow these hassle freeways. At Goodscity our top priority has always been our valued customers. We very well know your Goodscity product is a part and parcel of your everyday life, which is why We are more easily accessible than earlier.

For detailed warranty terms please visit the link:https://goodscity.in

For additional support:

Mail us at : help@goodscity.in or
call us on : +91890890 1290

FAQ

Q: How do I adjust the height of the support pole?
A: Release the clip in the support pole, adjust the pole to the desired height, and then fasten the clip securely.

Q: What is included in the product accessories?
A: The product includes a machine body with a water tank, ironing brush, hanger, small hanger pants clip, telescopic pole, trousers clip, small ironing tool, glove, and ironing board.