INMOTION MA01 5000mAh Wireless Power Bank Instructions
- June 11, 2024
- INMOTION
Table of Contents
INMOTION MA01 5000mAh Wireless Power Bank
Product Information
- Wireless Charging Surface: The product has a wireless charging surface that can charge compatible devices without the need for cables.
- Power Check Button: The product has a power check button that indicates the remaining battery capacity.
- Lightning Input: The product has a Lightning input that allows for charging using a Lightning cable (not included).
- USB-C Input / Output: The product has a USB-C input/output that allows for charging using a USB-C cable (included) and charging other devices that have a USB-C port.
- LED Indicator: The product has an LED indicator that displays the charging status of the product.
Product Usage Instructions
Before using the product, please read all safety information and operating instructions carefully to avoid injury or damage. Follow the instructions below to use the product:
Charging the Power Bank
To charge the power bank:
- Insert the USB-C connector of the charging cable provided into the USB-C port of the power bank and insert the other end to a power supply with USB-C port OR
- Insert a Lightning cable (not included) to the IP input port of the power bank and insert the other end to a power supply.
Wireless Charging
To wirelessly charge a compatible device:
- Place the device on the wireless charging surface of the power bank.
- If the device has a case, remove it before charging for better performance.
Wired Charging
To charge a device using a cable:
- Insert a USB-C connector of a charging cable into the USB-C port of the power bank and connect the other end to your device.
- The power bank supports wireless and wired charging simultaneously.
Battery Indicator
To check the remaining battery capacity:
- Press the power check button.
- 4 lights on, indicating the remaining battery capacity is around 75-100%
- 3 lights on, indicating the remaining battery capacity is around 50-75%
- 2 lights on, indicating the remaining battery capacity is around 25-50%
- 1 light on, indicating the remaining battery capacity is around 10-25%
- 1st light flashing, indicating the remaining battery capacity is under 10%. The power bank needs recharging.
Safety Instructions
Please follow these safety instructions to avoid injury or damage:
- Do not place or store the product in any high-temperature environment, including intense sunlight or heat. Do not place the product in a fire.
- Be cautious of any excessive drops, bumps, abrasions, or other impacts to the product.
- Do not disassemble or modify the product in any manner. Do not try to replace any parts of the product.
- Do not expose the product to moisture or submerge it in a liquid. Keep the product battery dry at all times.
- Do not attempt to charge the product using any other method except as described in this manual. Only use the included cable to charge the product.
- The product is intended for use by adults. The product should only be used by minors when under proper adult-trained supervision. The product should never be used by small children.
- If you find that your product is not functioning properly, or if the product is emitting excessive heat, odor, deformed in any way, broken, cut, experiencing or demonstrating some abnormal phenomenon, stop using it immediately.
- When planning for extended storage of the product, first charge it for one hour.
- Do not use the product while in any potentially explosive atmosphere. Sparks in such areas could cause an explosion or fire, resulting in serious injury or even death.
- If you choose to dispose of the product, dispose of the battery in an appropriate manner following all federal and state regulations. Since the product contains electronic components and a battery, it cannot be thrown away with normal household waste.
OVERVIEW
- Wireless Charging Surface
- Power Check Button
- Lightning Input
- USB-C Input / Output
- LED Indicator
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read all safety information and operating instructions prior to using
this battery product. Improper use of the product could result in excess heat,
fire, explosion, electric shock, toxic fumes or other injury or damage.
- Do not place or store the product in any high-temperature environment, including intense sunlight or heat. Do not place the product in a fire.
- Be cautious of any excessive drops, bumps, abrasions, or other impacts to the product.
- Do not disassemble the product. Do not attempt to repair or modify the product in any manner. Do not try to replace any parts of the product.
- Do not expose the product to moisture or submerge it in a liquid. Keep the product battery dry at all times.
- Do not attempt to charge the product using any other method except as described in this manual. Only use the included cable to charge the product.
- The product is intended for use by adults. The product should only be used by minors when under proper adult-trained supervision. The product should never be used by small children.
- If you find that your product is not functioning properly, or if the product is emitting excessive heat, odor, deformed in any way, broken, cut, experiencing or demonstrating some abnormal phenomenon, stop using it immediately.
- When planning for extended storage of the product, first charge it for one hour.
- Do not use the product while in any potentially explosive atmosphere. Sparks in such areas could cause an explosion or fire, resulting in serious injury or even death.
- If you choose to dispose of the product, dispose of the battery in an appropriate manner following all federal and state regulations. Since the product contains electronic components and a battery, it cannot thrown away with normal household waste.
Power Bank Recharge
Insert the USB-C connector of the charging cable provided into the USB-C port
of the power bank and insert the other end to a power supply with USB-C port
or; Insert a Lightning cable (not included) to the IP input port of the power
bank and insert the other end to a power supply.
Wireless Charging
Another wireless charging-supported device can also be charged wirelessly
however they will not be attracted to each other. To have a better charging
performance, please remove the case of your device before charging.
Wired Charging
Insert a USB-C connector of a charging cable into the USB-C port of the power
bank and connect the other end to your device. The power bank supports
wireless and wired charging simultaneously.
Battery Indicator
Press the power check button to check the remaining battery capacity.
- 4 lights on, indicating the remaining battery capacity is around 75-1000/o
- 3 lights on, indicating the remaining battery capacity is around 50-750/o
- 2 lights on, indicating the remaining battery capacity is around 25-500/o
- 1 light on, indicating the remaining battery capacity is around 1 0-250/o
- 1st light flashing, indicating the remaining battery capacity is under 1 09!o．Power bank needs recharging.
Technical Specification
- Capacity: 5000mAh
- Lightning Input: DC 5V / 2.1 A
- USB-C Input : DC 5V / 3A, DC 9V /2A, DC 12V / 1.5A
- Wireless Output: 5W, 7.5W, 1 OW, 15W Max.
- USB-C Output: DC 5V /3A, DC 9V / 2A, DC 1 2V /1.5A 1 BW Max.
- Size: 93. 7 x 63. 7 x 14.6mm (3. 7 x 2.5 x 0.6 in)[LxWxH]
- Weight: 116 g (4.1 oz)
- Cable length: 0.25m (1 0 in.)
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio / TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Phone is a trademark of Apple Inc., registered 1n the U.S. and other
countries. lnMotion and this product, are not affiliated with, or endorsed by
Apple Inc. Colors and content may vary. Please retain this information for
future reference. IMEG LLC 3755 W Sunset Rd Suite A, Las Vegas, NV 89118
Produced in China