CLATRONIC KM 3646 Food Processor Kitchen Machine Instruction Manual

: June 11, 2024
: CLATRONIC

CLATRONIC KM 3646 Food Processor Kitchen Machine

KM 3646 Food Processor Kitchen Machine

Instruction Manual

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine

WARNING:
This warns you of dangers to your health and indicates possible injury risks.

CAUTION:
This refers to possible hazards to the machine or other objects.

NOTE: This highlights tips and information.

General Notes

Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
Do not operate the machine without supervision. If you leave the room you should always turn the device off.
Remove the plug from the socket.
The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
Use only original spare parts.
In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:
Do not allow small children to play with the foil. There is a danger of suffocation!

Special Safety Instructions for this Device

WARNING: Risk of injury!

The grating and cutting blade, and the dicing blade are very sharp on the cutting and grating surfaces! Therefore, use these accessories with necessary care to prevent injuries.
The knives in the mixing bowl are sharp.

WARNING: Risk of injury!

Switch off the appliance and disconnect from mains power supply before changing accessories or attachments, which are moving during operation.
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
Before switching the appliance on ensure that the attachment is properly attached.
Whilst in use, there must be no objects, e.g. spoons or dough scrapers, in the bowl.
When pushing down the food, always use the supplied pusher and not your fingers, a fork or other objects in order to prevent injuries or hazards.
Do not pour any liquids that are hotter than 40 °C into the mixing container or into the bowl! Risk of burns!
Do not try to repair the appliance on your own. Always contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
This appliance shall not be used by children.
Keep the appliance and its cord out of reach of children.
Children shall not play with the appliance.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

CAUTION:

Do not immerse the device into water for cleaning. Please follow the instructions as stipulated in the chapter “Cleaning”.
Do not fill the vessels with any hard food such as coffee beans, nutmeg or large pieces of cooking chocolate! The knives may be damaged by doing so!
The device is equipped with safety switches. Do not operate the appliance if there is a fault or if the safety switches have been tampered with!
Place the device on a flat, level and sturdy surface.
Do not operate the appliance without any content.
Only process foodstuffs with this device.
Never turn off the appliance by turning the blender jug or the bowl or the lid of the bowl. Always use the knob when turning off the appliance.
Do not move the appliance during operation; always turn it off first and disconnect from mains power supply. Always carry the appliance with both hands!

Intended Use

This appliance is designed as a

kneading / mixing machine for preparing dough, crèmes, cream, whipped egg white;
multi-chopper for the chopping of easy to cut food;
blender to puree, whip or mix.

It is designed solely for these purposes and may only be used for them.
It may only be used in the manner described in this instruction manual.
The appliance may not be used for commercial purposes.
Any other use is considered not as intended and may lead to damage to property or even personal injury.
The manufacturer assumes no liability for damage resulting from use other than the intended purpose.

Description of the Parts / Supplied parts

Grating / cutting blade
Dicing blade
Pusher
Lid of the working bowl with feed shaft
Working bowl
Guide pin
Motor housing
Control knob
Drive shaft
Kneading / Stirring tool
Knife block
Blender jug
Blender jug cap
Blender jug lid with filler hole

Unpacking the Appliance

WARNING: Risk of injury!
Some parts of the accessory are very sharp!

Remove the packaging of the appliance.
Remove all packaging material such as plastic film, filler material, cable ties and box packaging. Keep the blade guard of the dicing cutter for appropriate storage.
Check that all parts are in the box.
If the packaging content should be incomplete or if damages should be noticeable, do not operate the appliance. Return it to the distributor immediately.

NOTE:
Dust or production residues may still be found on the appliance. We recommend that you clean the appliance as described under “Cleaning”.

General Notes on Use

Functionality of the device

The appliance is equipped with safety switches. The appliance can only be operated if you observe the following:
- When fitting onto the motor housing, the working bowl or the blender jug with the knife block must audibly click into place.
- When using the bowl, either the lid must audibly click into place onto the bowl.
Turn the control knob to select the speed. Always start slowly with a low speed.
PULSE = Pulse mode: Hold the control knob in this position to run the appliance at the maximum speed setting.
0 is the off position

CAUTION:

Always set the control knob to 0 before plugging in.

CAUTION:

Short-term operation with the bowl: With heavy dough do not operate the appliance longer than 1 minute and leave for 2 minutes to cool down.
Short-time operation mixer: Do not use the appliance longer than 3 minutes continuously. Allow to cool down for 1 minute before using it again.
Disconnect the plug from the socket after use.

Electrical Connection

Ensure that your mains power corresponds with the specifications on the type label۔

Using the Working Bowl

Assembly of the Working Bowl and the Accessories

WARNING:
The grating and cutting blade, and the dicing blade are very sharp on the cutting and grating surfaces! Therefore use these accessories with the necessary care to prevent injuries.

Place the guide pin onto the drive shaft of the motor housing.
NOTE:
The bowl has a mark at the bottom. The symbols and can be found on the motor housing.
Align the bowl marking with the symbol. Turn the bowl towards . It latches into place.
Select an attachment. Place it onto the guide pin.
NOTE grating and cutting blade:
The grating and cutting blade can be placed on both sides. The desired cutting surface must point upwards.
Close the working bowl with the lid. Put the lid on, so that the lock symbols of the lid are found to the left of the handle. Tighten the lid counterclockwise.

Table of Use of the Accessories

Product / Type of preparation| Amount| Tool| Level| Max. Operating time
---|---|---|---|---
Mix food with liquids| Max. 1500 ml| Blender jug| 1 – 2| 3 minutes
Nuts| Min. 200 g
Max. 500 g| Working bowl with dicing blade| 2| 2 minutes
Herbs| Max. 1000 ml| Working bowl with dicing blade| 2| 3 minutes
Chocolate (cut into pieces)| Max. 200 g| Working bowl with dicing blade| 2| 1 minute
Cut meat into pieces| Max. 500 g| Working bowl with dicing blade| 2| 2 minutes
Chop onions, carrots, potatoes, cucum- ber| Max. 500 g| Working bowl with dicing blade| 2| 1 minute
Shred or cut onions, carrots, potatoes, cucumber| Max. 1000 ml| Rasp / cutting blade| 2| 3 minutes
Whipped egg whites| Min. 4 egg whites
Max. 8 egg whites| Kneading / stirring tool| 1| 3 minutes
Cream| Min. 400 ml Max. 1000 ml| Kneading / stirring tool| 1| 3 minutes
Mixing dough, pudding, waffle dough (liquid)| Max. 1000 ml| Kneading / stirring tool| 1 – 2| 3 minutes
Mixing dough, pudding, waffle dough (viscous)| Max. 1000 ml| Kneading / stirring tool| 1 – 2| 2 minutes
Heavy kneading dough| Max. 500 g| Kneading / stirring tool| 1| 1 minute

Important Notes for the individual Applications

CAUTION:
Do not exceed the quantities and operating times listed in the table.

Always fit the kneading / stirring attachment or the dicing blade into the bowl before you add the ingredients. Press the attachment to the bottom of the bowl.
If you are kneading heavy dough, do not add all the ingredients into the working bowl all at once. Only start the kneading process with flower, sugar, and eggs. Slowly add liquids through the feed shaft during the kneading process.
First, cut the food that you want to chop into small pieces.
If ingredients are stuck to the kneading / stirring tool or the dicing blade or if they settle on the inside wall of the bowl, then proceed as follows:

Turn off the appliance. Wait for the attachment to stop running.
Remove the lid from the bowl. Turn this towards .
Use a dough scraper to remove the ingredients from the attachment or from the inside wall of the bowl.

CAUTION:
Do not use metal objects to avoid scratching the bowl.

If you whip the egg whites, ensure that the bowl and the whisk are dry and completely free of grease. The egg white should be at room temperature.
To chop chocolate, only use the dicing blade, not a grating blade. The chocolate must be well chilled.
When you cut up hard cheese or chocolate, do not let the appliance run too long. These ingredients can melt through the warming of the appliance and may become lumpy.
When chopping and grating, fill the ingredients into the feed shaft. Use the pusher to push the food down into the filler hole. Do not apply too much pressure to the pusher.

End Operation and Remove Bowl

Turn the appliance off. Wait until the attachment stops running.
Disconnect the mains plug.
Turn the lid off in the direction of .
Remove the attachment.
Turn the bowl towards to remove these. Watch out for the guide pin.
Use a dough scraper to remove the contents of the bowl.
Clean all the parts used as described under “Cleaning”.

The Blender

Blender Use Instructions

WARNING: The knife in the blender is sharp!

• Never reach with your hands into the assembled mixing container!
• There is s risk of injury when cleaning and emptying the mixer jug! Handle the blender knife with great care!

CAUTION:

• Do not place hard ingredients such as nuts or coffee beans in the mixing container.
• The knife in the mixing container is not suitable for crushing ice cubes only.

RECOMMENDATION:
When preparing drinks with crushed ice only add the ice cubes during mixing. The ice cubes will be crushed during mixing.

Do not use the blender without ingredients!
Do not exceed the maximum capacity (1500 ml) as indicated on the mixing container!
Froth requires a large capacity. Reduce quantities of liquids which produce a lot of froth.
Only turn on the mixer with the lid and the fitted cap. There is a marking on the handle of the mixing bowl. Align the ▼ marking with the symbol. To close the lid, turn it so that the symbol is positioned on the marking.
Do not remove the lid during operation! Wait until the blade comes to a stop before you open the lid.
Should you not be satisfied with the mixing results, proceed as follows:

Turn off the appliance.
Remove the lid from the blender jug. Turn the lid so that the ▼ is symbol positioned on the marking of the handle.
Loosen any stuck-on ingredients with a dough scraper. Stir the ingredients with the dough scraper.
Remove some of the contents. Process smaller quantities or add some liquid.

Mixing Jug Assembly

NOTE:
The mixer jug has a mark at the bottom. The symbols and can be found on the motor housing.

Align the mixer jug marking with the symbol.
Turn the mixing bowl towards . It latches into place.

Preparation

Cut all ingredients in small pieces.
Fill the ingredients into the blender jug. Observe the maximum capacity.
Fit the lid onto the blender jug.
Close the lid with the stopper (13).

Operating the Mixer

Any speed can be selected with the control knob.
If the blender jug is very full or if it contains a foaming liquid, always start with step 1.

Refill Ingredients

Switch the appliance off. Wait until the blade comes to a stop.
Fill in ingredients or spices through the stopper opening.
Close lid and stopper opening again.
Continue operation.

Stop Operation

Switch the appliance off. Wait until the blade comes to a stop.
Disconnect from mains power supply.
Turn the mixing bowl in the direction of from the motor housing.
There are two ways to pour out the contents of the mixing bowl:
• You can pour out the contents with the lid closed. Turn the lid so that the symbol is positioned on the marking of the handle.
• Take the lid off completely and pour the contents out.
Clean all used parts as described under “Cleaning”.

IMPORTANT NOTE:
Do not store citrus juices or acidic foodstuffs in metal containers.

Cleaning

WARNING:

Always disconnect the mains plug before you remove the accessories and clean the appliance!
Do not immerse the motor housing in water for cleaning in any case. This may lead to electric shock or fire.
Some parts of the accessories are very sharp. There is risk of injury!

CAUTION:

Do not use a wire brush or other abrasive utensils for cleaning.
Do not use aggressive or abrasive cleaning agents.

Motor Housing

Clean the housing only with a damp cloth and a squirt of washing-up liquid. Dry with a cloth.

Accessories of the Kitchen Appliance

WARNING: Risk of injury!
Some parts of the accessory are very sharp!

CAUTION:
The attachments are not suitable for dishwasher. Heat and aggressive cleaning agents may warp or discolour the attachments.

You may clean all other components that have come in contact with food in a bowl of hot water.
Rinse with clean water and dry thoroughl
Traces of dye-rich foods (e.g. carrots) are best removed with cooking oil.

Blender Accessories

NOTE: Pre-Cleaning
Fill the blender jug half with water and run the appliance for approx. 10 seconds. Dispose of the liquid.

WARNING: Risk of injury!
The knives on the knife block are sharp. Be careful when disassembling, cleaning, and assembling the individual parts.

Remove the blender jug for thorough cleaning.
Turn the knife block in the direction OPEN from the blender jug.
Remove the seal ring from the knife block.
You can clean the blender jug and the lid with cap in a bowl of hot water. Afterwards, rinse with clean water and dry the parts off.

Seal ring and knife block

Rinse these parts briefly under running water.
Dry the parts. Then place the seal ring on the knife block.
Place the knife block from below into the blender jug. Tighten it in the direction LOCK.

Storage

Clean the appliance as instructed. Ensue that all accessories are completely dry.
We recommend that you keep the appliance in the original packaging if it will not be used for long periods.
Insert the blade guard on the dicing knife to avoid injury.
Always store the appliance out of the reach of children in a dry, well ventilated place.

Troubleshooting

Problem	Possible cause	Remedy
The device is not working.	The appliance has no power supply.	Check the

socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Your appliance is equipped with

safety switches. They prevent accidental motor start.

| Check correct position of

the working bowl
the lid of the working bowl or
the blender jug.

The appliance is faulty.| Contact our service center or a specialist.

Technical Data

Model:………………………………………………………………..KM 3646
Power supply:……………………………………… 220 – 240 V~, 50 Hz
Power consumption: ………………………………………………. 500 W
Protection class: …………………………………………………………….
Net weight (basic appliance with
mixing bowl and kneading tool): …………………… approx 2.00 kg

The right to make technical and design modifications in the course of continuous product development remains reserved.
This appliance has been tested according to all applicable, current CE directives and built according to the latest safety regulations.

Disposal

Meaning of the “Dustbin” Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.
Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the environment and human health.
This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.