air choice WTF-010L Portable Tower Fan Instruction Manual
- June 14, 2024
- air choice
Table of Contents
air choice WTF-010L Portable Tower Fan
Product Information
Specifications
- Voltage Rating: AC 120V ~ 60Hz
- Power Consumption: 60W
- Unit Size: 13 in. (W) x 10.24 in. (D) x 41.1 in. (H)
- Weight: 13 LB
- Water tank: 0.79 gal
Operation
Assembling
- Take out the product from the box.
- Turn the product upside down.
- Align the four fixing screw holes of the assembled base with the screw posts of the fuselage.
- Lock the fuselage and the base with 4 self-tapping screws and tighten the screws in the correct direction.
Panel/Remote Operation
Place the unit on a firm level surface and plug it into a wall plug. The power indicator light will remind you that the product is in standby mode. Press the power button to turn on the product.
- Speed button: Select 3 different fan speeds (Low/Middle/High) by pressing the speed button.
- Mode button: The default setting is in normal wind. Press this button to switch from normal wind to natural wind or sleep wind.
- Oscillating button: Press the button to oscillate the product. Press again to stop oscillating.
- Timer button: Set the timer from 0 to 12 hours. Press once to adjust for one hour.
- Cooling button: If you have put the frozen icebox into the water tank, press this button to blow cooler air. Press it again to cancel the function.
Panel and Remote Control Display
Cleaning & Storage
Maintenance Guidelines
Always switch off the Air Cooler and unplug it from the electrical source before cleaning or maintenance. Clean at least once a week, drain the water tank completely, and refill with fresh water. Cleaning frequently will greatly reduce mineral residue and help to extend the life of the water pad.
Storage Guidelines
- Make sure all parts are dry by running the Fan Only mode for about 30 minutes before storing (time depends on ambient humidity conditions).
- Switch OFF the Air Cooler and unplug it from the power supply.
- Empty/drain all the water from the tank.
- Clean the water tank with a damp cloth to wipe away any dust or mineral deposits.
- Remove the water pad from the Air Cooler and rinse it under fresh water to remove dust and dirt. Put it back into the fuselage. Please do not rub the mesh with your hand to avoid deformation and affecting the wind direction.
Contact Us
For any questions or help, please email us: [email protected] or call +1 855 620 5858. Our working hours are [EST 9:00 to 17:00] Monday to Friday.
COMPONENTS DIAGRAM
SPECIFICATIONS
| Voltage Rating | AC 120V ~ 60Hz |
|---|---|
| Power Consumption | 60W |
| Unit Size | 13 in. (W) x 10.24 in. (D) x 41.1 in. (H) |
| Weight | 13 LB |
| Water tank | 0.79 gal |
OPERATION
ASSEMBLING
- Take out the product from the box
- Turn the product upside down
- Align the four fixing screw holes of the assembled base with the screw posts of the fuselage, a nd lock the fuselage and the base with 4 self-tapping screws and tighten the screw in the correct direction.
Fill the water tank
- Fill water into the water tank from the top cover or bottom with cold and clean water.
- Make sure that water level is between “Min” minimum level and “Max” maximum level.
- To increase the cool effect, put the ice box into the water tank. Before using ice box, they must be filled by water and put in the refrigerator until they are completely frozen.
- Close the water tank.
Attention!
- Make sure the product is unplugged from the mains before filling or refilling the water.
- Only add cold water into the water tank. Do not add any chemicals, oils or other additives.
- Make sure the water level in the water tank is between minimum level (indicated by “Min”) and maximum level (indicated by “Max”)
Panel/remote operation
Place the unit on a firm level surface and plug it into a wall plug. Power indicator light reminding this product is in standby mode. Press on button to power on the product.
- Speed button Select 3 different fan speeds (Low/Middle/High) by pressing the speed button.
- Mode button The default setting is in normal wind. Press this button to set from normal wind to natural wind or sleep wind
- Oscillating button Press the button to Oscillate the product . Press again to stop Oscillating.
- Timer button Set the timer from 0 to 12 hours.Press once to adjust for one hour.
- Cooling button If you have put the frozen icebox into the water tank, press this button, the air blown from the device will be cooler. Press it again to cancel the function.
Panel and remote control display：
CLEANING & STORAGE
MAINTENANCE GUIDELINES
Always switch off the Air Cooler and unplug it from the electrical source
before cleaning or maintenance. Clean at least once a week, drain the water
tank completely and refill with fresh water. Do the cleaning frequently will
greatly reduce mineral residue and help to extend the life of the water pad.
STORAGE GUIDELINES
- Make sure all parts are dry by running the Fan Only mode for about 30 minutes before storing (time depends on ambient humidity conditions).
- Switch OFF the Air Cooler and unplug from the power supply. Empty/drain all the water from the tank. Clean the water tank with a damp cloth to wipe away any dust or mineral deposits.
- Remove the water pad from the Air Cooler and rinse under fresh water to remove dust and dirty and put it back into the fuselage. (See Figure A below.) Please do not rub the mesh with your hand to avoid deformation and deformation of the net, affecting the wind direction.
- To protect the unit from dust and scratches, cover with a clean cloth or plastic bag before storing. Coil the power cord and store it away from the floor to protect it.
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect from the
electrical socket. unscrew the water pump knob, pull out the water tank, clean
the water tank and put it back, and screw the water pump knob to the water
pump. See Figure B below Refill the water tank with clean water and drain it
completely. Refill the water tank with clean water, up to the maximum level.
Use a damp cloth to remove the dirt and dust from the surface of the unit.
Never use corrosive elements or chemicals to clean this product. When the
product is not in use, store the unit in a dry place out of direct sunlight
.
CAUTION
- Please use at rated voltage.
- The rated current of the socket should exceed 10A.
- Do not repair or refurbish the device yourself. It should be repaired by professional repair personnel.
- Do not operate the appliance with wet hands to avoid damage and risk.
- If the supply cord is damaged, it must be replaced with a special cord or assembled by the manufacturer or its service agents.
- When the appliance is not in use, switch it off and unplug its power cord.
- Do not insert sundries to the air outlets and inlets to avoid damage.
- Do not use the appliance next to the explosive and combustible gas.
- Use the appliance only on a flat surface.
- Do not use it outdoors.
- The level of the water tank should not exceed the “MAX” scale at any time when it is working, the total level of the water tank should upper the “MIN” scale.
- After filling water into the water tank, do not tilt or knock over the appliance when you place or move it. If you want to move it, please move it slowly and gently to prevent water from splashing.
- Do not turn over the appliance. If it is toppled over, and there is some water inside, please unplug the power supply immediately. Then send it to the repair department or after-sales service to overhaul.
- Do not put sundries on the appliance, do not cover air vent.
- Clean the appearance with a lightly damp cloth. Do not use any type of detergent or solution. Do not rinse with water.
- Do not put air outlets and inlets near the wall or curtain.
- Do not knock or shake the body when it is in use, otherwise, it may cause it to stop working.
- The water in the tank is susceptible to deterioration especially in the summer and it needs to be renewed frequently.
- The appliance must not be located directly below a socket outlet.
- Do not use the appliance with a programmer, timer or any other device.
- Do not use this product near bathrooms, performances, or swimming pools.
- This appliance is not intended for use by persons including children with reduced physical, sensory or mental abilities, or lack of experience and knowledge unless the appliance is used under the supervision or direction of their guardians.
- Children should be supervised to ensure that they do not play with the appliance.
CONTACT US
Thank you for choosing AIR CHOICE product. For any questions of your product
or honor your warranty, Please scan the QR code below to get our [24-hour
online vip service ]or write to
[[email protected]] Our
customer service time will respond ASAP within 24 hours