BON CHARGE Super Max Red Light Therapy Device User Manual
- June 17, 2024
- BON CHARGE
Table of Contents
- BON CHARGE Super Max Red Light Therapy Device
- KEY POINTS
- SETTING UP AND USING YOUR SUPER MAX DEVICE
- MISCELLANEOUS INFORMATION
- TROUBLESHOOTING
- FREQUENTLY ASKED QUESTIONS
- TECHNICAL SPECIFICATIONS
- WARNINGS AND CAUTIONS
- MAINTENANCE, CLEANING AND DISPOSAL
- WARRANTY AND RETURNS (SUPER MAX DEVICE)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BON CHARGE Super Max Red Light Therapy Device
WELCOME
Welcome to the world’s most optimal tribe, we are so happy to welcome you to
the BON CHARGE family. You have chosen the most optimal light therapy device
ever mode and anything is possible when you create the optimal light
environment.
The Super Mox red light therapy device delivers high-powered and focused red light at 660nm (visible red light) and near-infrared light at 850nm (invisible light) The Super Mox red light therapy device can run these wavelengths separately or together depending on how you wish to use it.
Visible red light at 660nm focuses on skin restoration and repair.
Invisible near-infrared light targets pain relief through deep tissue
penetration.
Visible 660nm Red Light Con Help With:
- Reduce wrinkles and fine lines
- Skin tightening and firming
- Reducing blemishes & redness
- Reducing age spots and hyperpigmentation
- Fading acne scars
- Psoriasis
- Eczema
- Rosoceo
- Athletes Foot
Invisible Near Infrared Light Con Help With:
- Pulled and strained muscles
- Muscle spasms
- Mild inflammation
- Sprains
- Neck and muscle stiffness
Using a combination of invisible near infrared light and visible red light combines both skin rejuvenation and pain relief at the some time. Most of these benefits happen because these frequencies of light activate enhanced signalling at a cellular level and increased protein synthesis. The light emitted by the Super Mox device should be shone onto bore skin for the most optimal results.
KEY POINTS
Activating your Super Max device
Your Super Max device comes with everything you need to start your journey to
an optimal life. You are about to experience the epic health benefits of red-
light therapy. For the best possible results, it is highly recommended you
read this manual prior to using your Super Max device for the first time.
Photosensitivity Test
It is very important to do a photosensitivity test prior to long sessions with
your Super Max device. Turn on both the Red and NIR switches on your Super Max
device Max and shine the light on an exposed part of your forearm, about 3
inches to 1 foot away for 4 minutes. If you experience any discomfort or
redness on your skin you must not use your Super Max device until you have
sought professional advice from your doctor or healthcare provider.
Usage Instructions
Your Super Max device should be positioned between 3 inches to 1 foot away
from the body when activating either red or near-infrared options. Super Max
device delivers >162 mw/cm2 of energy meaning that at this distance you will
receive the optimal treatment. At this power the recommended treatment time is
ten minutes.
Multiple Usages
Light therapy works best when administered consistently. The best results will
be seen from daily use but as a minimum, it is recommended to use your Super
Max device at least 4 times a week. If you are suffering from a major injury,
long term aches and pains or severe skin conditions utilising your Super Max
device up to three times per day can be helpful.
What to Expect
The time it takes to see results from using your Super Max device depends on
your personal goals. Countless peer-reviewed academic studies show the long-
term benefits of red-light therapy. It’s important to trust these studies and
know that you are benefiting from using your Super Max device. Most people
will feel and see benefits within a week of consistent use but other people
may take up to 3 months to see and feel the benefits. By using your Super Max
device on a daily basis, you will be optimising the benefits.
SETTING UP AND USING YOUR SUPER MAX DEVICE
What’s in the Box?
- 1 x Super Max device
- 1 x Power Card
- 2 x Braided Steel Cables
- 1 x Threated Posts
- 1 x Eye gaggles
- 1 x H eight-Adjusting Pulley
- 1 x Door Haak
Step 1
Place your Super Max device face down an a scratch-free surface. Screw in the
threaded posts at the top of the device as shown below. Hand tighten and then
screw the braided cables ta the threaded pasts.
Step 2
Hang the hook on any standard-sized door as show below.
Step 3
Connect the braided cables to the snap link attached to the height-adjusting
pulley. Connect the snap link on the opposite end directly to the door hook.
Step 4
To raise your Super Mox device to your desired height, pull down on the loose
coble while supporting the device with your opposite hand.
Step 5
Once your treatment is over, switch off the Red and NIR light, or whichever
combination you have chosen. Ensure that these buttons are switched off after
your session to ensure the longevity of your battery.
Step 6
Plug the power cord into the mole power socket which is found at the back of
the device. Then plug the other end into the wall power outlet. Then switch
the power on.
Step 7
Now its time to select your session time. To adjust this time, press the
button on the control panel. This will odd time in five-minute increments up
to o a maximum of 30 minutes. To reduce the amount of session time press the
button.
Step 8
Your Super Mox device contains both red and near-infrared wavelengths. After
selecting your session time, you con change the mode to use only the red or
near-infrared LEDs by selecting the “RED” or “NIR” button on the control
panel. The R red indicator light will light up indicating red light hos been
activated and the green IR light will light up if near-infrared light is
selected. You con use both Red and near-infrared light together or separately.
Step 9
Pop on your goggles (if required) and enjoy your session.
Your Super Max device’s cooling fans will run for S minutes after the treatment session is complete to cool the LEDs.
MISCELLANEOUS INFORMATION
TROUBLESHOOTING
- My Super Max device won’t turn on:
- Ensure your Super Max device is plugged in with the power switched on at the mains.
- Ensure you are using the power cable supplied with your Super Max device.
- If your Super Max device still won’t turn on please contact BON CHARGE at hello@boncharge.com for further assistance.
- I’m not sure how to use the timer in the control panel:
- The “Time” button adjusts the session time in increments of 1 minute, with a maximum session time of 20 minutes. The time will cycle back to 1 minute when the display exceeds 20 minutes.
- When the desired session time is selected, it will be shown on the display.
- Pressing “Play/Pause” will start the session. If “Play/Pause” is pressed again during the session, the session will pause.
- If the timer has been adjusted and the session started, the device will recall the newly programmed session time for subsequent sessions.
FREQUENTLY ASKED QUESTIONS
-
How should I use my Super Max device?
We highly recommend using your Super Max device for ten-minute sessions about 3 inches to 1 foot away from your target area. -
Do I need to wear eye protection?
Protective goggles have been supplied for your protection. We recommend wearing these when using your red light device. We do not recommend looking directly into the LED lights. -
Why does it appear that the Near Infrared lights aren’t working?
Near-infrared light is an invisible frequency of light that our eyes cannot detect. You can tell if these lights are working as we have added a dim light in the LED bulbs to show they are functioning. -
What is the difference between red and near-infrared light?
Red light is visible light that is best used to improve the skin. Near Infrared light is invisible and penetrates deeper into the muscle tissue making it best for muscle recovery and easing join pain. -
Can I use my Super Max device with clothes on?
You can use your Super Max device with your clothes on but we cannot guarantee results. The most optimal results are achieved by having your bare skin absorb the light from Super Max device, in the specifically chosen target area. -
Will the light from the Super Max device disrupt any medication I am taking?
If you are taking any photosensitizing medication ensure you seek medical advice before using Super Max device. Such medications include Tetracycline, Digoxin and Retin A. Thousands of clinical trials have shown light therapy to be safe and effective, however, it is always recommended to consult your health care provider of doctor before using the Super Max device. -
Can my children use the Super Max device?
Peer-reviewed clinical trials have shown red light therapy to be safe and beneficial. However, if you would like your children to experience red light therapy we always recommend consulting with your healthcare professional first. -
When can I expect to see results?
After just a few sessions you may experience reduced swelling, stiffness and clearer skin. After one session you may feel a nice warmth around the area where you have used your Super Max device on. Consistent use over time will get the best results and give the best outcome for muscle or joint-related issues.
TECHNICAL SPECIFICATIONS
- Model: BON CHARGE Super Mox Device
- Size: 91cm x 21cm x 6.5cm (35.5 inches x 11.8 inches x 2.56 inches)
- Irradiance: >162 mw/cm2
- Weight: 10kg (22 lb)
- Wavelengths: 660nm Red (300pcs)/850nm Near Infrared (300pcs)
- Flicker: <0.1%
- Warranty: 1 Year
- Power: 1,500W
- Voltage: AC85-265V
- Certification: CE, FCC, RCM
- LEDs: 5W-300 LEDs
- Beam Angle: 30 degrees
WARNINGS AND CAUTIONS
Warnings
- Do not store directly in the LEDs or its reflection in the mirror. This can cause temporary irritation to the eyes.
- Do not allow children to use Super Mox devices unsupervised or without clearance from your medical practitioner.
This device is an electrical device and to avoid electric shocks you must adhere to the following:
- Do not drop the device in liquid.
- Do not wash this device with any liquids.
- Do not touch with wet hands.
- Do not use the device on wet skin.
- Do not tug or pull on the charging cable when charging the device.
- Do not use the device if it has been dropped, left outside or exposed to liquids
- Do not use on or near hot surfaces.
- Do not operate near flammable or combustible products or where vapours may be present. Explosion of fire may occur.
- Do not use this device on disabled, sleeping or unconscious people
- Do not use this device on open wounds.
- Do not use in conjunction with solids, balms or ointments.
- Do not modify or attempt to modify this device.
- Do not attempt to repair this device.
Cautions
BON CHARGE advises that before using your Super Max device you must seek a
professional doctor’s advise.
This includes if:
- You are pregnant.
- Are taking drugs known to cause sensitivity of skin to light?
- Have any suspicious or cancerous lesions.
- Recently had a steroid injection or use topical steroids.
- Do not use this device on infants.
- If you experience discomfort or have a concern about the device, stop use immediately and contact your doctor.
- For indoor use only
- Use only equipment provided with your Super Max device
- Do not exceed 20-minute session
If you have any difficulties in cleaning or setting up your Super Max device please reach out to us for help at hello@boncharge.com.
Electrical Safety
- Do not place or operate the device near water or liquids.
- Do not place near or pour running water over device.
- This device is not to be used in the vicinity of water.
- Do not store the device is temperatures exceeding 140F or 60C.
- Do not use your device if damaged, this may result in electric shock or injury.
Disclaimer
This product is not intended to diagnose, cure or prevent disease. BON CHARGE
Pty Ltd. makes no claims, representations or otherwise warranties about the
ability of this product to cure any physical, skin or mental conditions from
using this product.
A qualified health professional should always be consulted prior to using this
product and about any conditions requiring medical attention or
contraindications.
MAINTENANCE, CLEANING AND DISPOSAL
Maintenance
The Super Max device does not require any maintenance.
Cleaning
- Ensure your Super Max device is switched off.
- Clean the surface with a dry cloth.
- Avoid using any polishes or bleaches as they may damage your Super Max device.
Disposal
This device must not be disposed of with your normal household rubbish. This
device requires disposal via your designated waste collection point. This
device contains a lithium battery and this must be disclosed when handing over
to the waste collection point adviser.
WARRANTY AND RETURNS (SUPER MAX DEVICE)
Manufacturer’s Warranty (Super Max Device)
BON CHARGE Pty Ltd warrants that this device (Super Max device) will function
and perform within the specifications for one year from the date of delivery.
What does this Manufacturer’s Warranty cover?
This Manufacturer’s Warranty covers any defect in material or workmanship
under normal use during the warranty period. During the warranty period, BON
CHARGE Pty Ltd will repair or replace, at no charge, products or parts of a
product that proves defective because of improper material or workmanship,
under normal use and maintenance.
How long does the cover last?
This Manufacturer’s Warranty for Red Light Device purchased from BON CHARGE
Pty Ltd is valid for one (1) year from the date of purchase A replacement Red
Light Device or port assumes the remaining warranty of the original Red Light
Device.
What does this warranty not cover?
This Manufacturer’s Warranty does not cover any problem that is caused by:
- Conditions, malfunctions or damage not resulting from defects in the material or workmanship
- Equipment that has been abused, modified, damaged, or fitted with substitute ports.
What do you have to do?
To obtain warranty service, you must first contact us to determine the problem
and the most appropriate solution for you.
Contact details
hello@bonchorge.com
2/74 Gordon Road East, Osborne Pork, 6017, Western Australia
If service is required, the buyer is responsible for returning the device to
BON CHARGE Pty Ltd within the one (1) year warranty period.
BON CHARGE Pty Ltd reserves the right to provide ports in different
colours to the original device.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Low. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Returns
All of our products come with a risk-free 30-day guarantee. This 30-day period
starts from the day you receive your Super Mox device. If you’re not satisfied
with your purchase during the guarantee period, simply email
hello@bonchorge.com and we’ll provide o hassle-
free return experience. Here are some details to note:
- Return shipping will be your responsibility. We cannot be responsible for lost or damaged shipments.
- All returns or exchanges must be received in like-new condition with all original accessories in the packaging.
- All returns received with damaged or missing components may be subject to additional fees. If applicable, these fees will be deducted from the refunded amount.
- All returns will be inspected and processed within 3-5 days of receipt by BON CHARGE.
- Returns must be postmarked before the end of the 30-day guarantee period. Returns sent after this period will not be accepted.
- This product contains o lithium battery and this must be disclosed to your logistics carrier when shipping back to Australia. Our preferred carrier is DHL Express.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>