SMITH NOBLE DD7006F Smart Hub User Guide
- June 12, 2024
- SMITH NOBLE
Table of Contents
SMITH NOBLE DD7006F Smart Hub
Product Information
This product is a wireless device that complies with FCC and IC radiation exposure limits for an uncontrolled environment. It is designed to be installed and operated with a minimum distance of 20cm between the radiator and your body.
Product Usage Instructions
- Ensure that the device is placed at least 20cm away from your body during installation and operation.
- When setting up the device, position it in a location that allows for the recommended minimum distance from your body.
- Avoid carrying or holding the device directly against your body while it is in use.
- If you are using the device for an extended period, consider placing it on a surface or using a stand to maintain the recommended distance.
- Do not attempt to modify or tamper with the device’s internal components, as it may affect its compliance with radiation exposure limits.
- Follow all other instructions provided in the user manual for proper installation, operation, and maintenance of the device.
Following these usage instructions will help ensure compliance with FCC and IC radiation exposure limits and promote safe use of the wireless device.
Declarations
U.S. Radio Frequency FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.FCC RF Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum
distance 20cm between the radiator & your body.
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.
Smith & Noble Smart Hub allows the user to link their motorized Shades, Blinds, and Draperies, into a Wi-Fi network, enabling Smart App control and interaction with other loT products and Third Party integration.
- Do not dispose of in general waste.
- Please recycle batteries and damaged electrical products appropriately.
Step 1
- Please scan the OR code below to download the Smith & Noble 3.0 Mobile App for motorized window coverings.
Step 2
Please scan the QR code below to learn more about linking the Smith & Noble
Smart Hub with your home Wi-Fi router, setting up the Smith & Noble App, and
establishing a connection with other loT applications.
3rd Party Integration programs are available
SPECIFICATIONS
Pairing & Programming
Status Indicator
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>