CIG WF-402B-UWB Location Beacon Instructions

CIG WF-402B-UWB Location Beacon

Product Information

• Model: WF-402B-UWB
• Enclosure: Beacon

Features

• NORDIC NRF52833 SoC with 512 kB Flash + 64 kB RAM, integrated with SoC
• 1 x Bluetooth5 (On board ANT)
• 3 x LED (Red, Green, Yellow)

Block Diagram

Hardware Features

1. Interfaces:
   • Beacon LEDx3
   • Resetx1
2. Circuit Design:
   • Beacon SoC: Nordic nRF52833
   • UWB SoC: Qorvo DW3120
3. Radio Feature:
   • Beacon BLE: NRF52833
   • Frequency: 2.4GHz
   • Data rate: 1Mbps, 2 Mbps
   • UWB Beacon: DW3120
   • Frequency: 6.4896GHz
4. Power:
   • DC-DC Input: 5V 1A

Product Usage Instructions

Environment

• Operating temperature: Specify the recommended operating temperature range.
• Operating humidity: Specify the recommended operating humidity range.
• Storage temperature: Specify the recommended storage temperature range.
• Elevations: Specify the elevation requirements.
• Environment: Specify the environmental compliance requirements (RoHS, WEEE, etc.).

Enclosure

• WF-402B-UWB: Mechanical Enclosure / Housing
• Dimension: Specify the dimensions of the enclosure.
• Material: Specify the material used for the enclosure.
• Visual inspection standard: Specify the visual inspection standard for the enclosure.

Reliability

• MTBF: Specify the Mean Time Between Failures.
• DOA: Specify the Dead On Arrival rate.
• AFR: Specify the Annualized Failure Rate.

Safety and EMC/EMI Compliance

• Safety: Specify safety compliance standards.
• EMC/EMI: Specify electromagnetic compatibility and interference compliance standards.
• FCC Interference Statement: Provide the FCC compliance information and guidelines for reducing interference.
• RF Exposure Warning: Provide information on FCC radiation exposure limits and the installation requirements for antennas.

Specifications

• Model: WF-402B-UWB

• Enclosure: Beacon

• Features:

  • NORDIC NRF52833 SoC with 512 kB Flash + 64 kB RAM, integrated
    with SoC

  • 1 x Bluetooth5 (On board ANT)

  • 3 x LED (Red, Green, Yellow)

• Block Diagram:

Hardware Features

1. Interfaces:
   • Beacon LEDx3
   • Resetx1
2. Circuit Design:
   • Beacon SoC: Nordic nRF52833
   • UWB SoC: Qorvo DW3120
3. Radio Feature:
   • Beacon BLE: NRF52833
   • Frequency: 2.4GHz
   • Data rate: 1Mbps, 2 Mbps
   • UWB Beacon: DW3120
   • Frequency: 6.4896GHz
4. Power:
   • DC-DC Input: 5V 1A

Frequently Asked Questions (FAQ)

• Q: Can the device be operated outdoors?
  A: No, operating the device outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.

• Q: What are the FCC compliance guidelines for reducing interference?
  A: The FCC recommends reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, and connecting the equipment into an outlet on a different circuit than the receiver. Consulting a dealer or an experienced radio/TV technician for help is also advised.

• Q: What are the RF exposure limits for this equipment?
  A: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It must be installed and operated according to the provided instructions, with a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operate in conjunction with any other antenna or transmitter.

• Q: Can this equipment be used onboard an aircraft, a ship, or a satellite?
  A: No, operation onboard an aircraft, a ship, or a satellite is prohibited.

WF-402B-UWB

Overview

The below table specifies the hardware features and requirements.

WF-402

Family

| Beacon| | Beacon

• NORDIC NRF52833
• Qorvo DW3120
• 512 kB Flash+ 64 kB RAM, integrated with SoC
• 1 x Bluetooth5(On board ANT)
• 3 x LED（Red, Green, Yellow）

Block Diagram

Figure 1 UWB Beacon diagram

Hardware feature

1-| Interfaces|
---|---|---
1-1

Beacon

| LEDx3| Yellow, Green, Red
| Resetx1|
| |
2-| Circuit Design|
2-1| Beacon SoC| SoC: Nordic nRF52833
2-2| UWB SoC| SoC：Qorvo DW3120
| |
3-| Radio feature|
3-1| Beacon BLE:| NRF52833
| Frequency| 2.4GHz
| Data rate| 1Mbps, 2 Mbps
| |
| |
3-2| UWB Beacon:| DW3120
| Frequency| 6.4896GHz
| |
| |
| |
| 4| Power|
| DC-DC| Iutput: 5V 1A|
---|---|---|---
5| Environment|
5-1| Operating

temperature

| 0°C ~ +40°C
5-2| Operating

humidity

| 5% to 95% non-condensing
5-3| Storage

temperature

| -10°C to +70°C
5-4| Elevations| 86kPa～106kPa
5-5| Environment| RoHS 2011/65/ compliant (RoHS 10 compliant, no Pb);
WEEE 2002/96/EC recyclable materials requirements
5-7| Surge| Meet YD/T 993-2006
AC port shall support 4KV common mode and 2KV difference mode surge.
5-8| ESD| ±6KV (Contact Discharge) / ±8KV (Air Discharge)
6-| Enclosure|
6-1| Mechanical Enclosure / Housing| WF-402B-UWB:

6-2| Dimension|
| | |
---|---|---|---
6-3| **** Material| WEEE 2002/96/EC recyclable materials requirements Rosh

REACH

6-4| Visual

inspection standard

| ** CIG A
7-| Reliability|
** 7-1| ** MTBF| > 300,000 Hours
Telcordia SR-332, Reliability Prediction Procedures for Electronic Equipment, Issue 3, Method 1, Case 3, GB/GC (Ground Benign, Controlled) environment, 25ºC ambient temperature. Steady state, not including software failure.
7-2| DOA| DOA (within 90 days of shipment) – less than 0.3%
7-3| AFR| AFR (Annualized Failure Rate) < 1.5% (in continuous operation)
8-1| Safety| UL62368-1
8-2| EMC/EMI| FCC/IC
****8-2a| ****RE**| EN55032,Class B Margin>4dB 1G below margin ≥ 4.0dB 1G above margin                  ≥ 4dB

30MHz ~ 230MHz 40dBμ V / m

230MHz ~ 1GHz 47dBμ V / m

1GHz ~ 3GHz AV detection 50dBμ V / m; PK detection 70dBμ V / m 3GHz ~ 6GHz AV detection 54dBμ V / m; PK detection 74dBμ V / m

Federal Communications Commission (FCC) Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

• This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.
• This equipment will not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.

RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

ISED
CAN ICES-003 (B)/NMB-003(B)
Canadian Compliance Statement This device complies with IndustryCanada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IMPORTANT NOTE:

Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Déclarationd’exposition aux radiations:

CIG PROPRIETARY

Documents / Resources

| CIG WF-402B-UWB Location Beacon [pdf] Instructions
WF402B, SFK-WF402B, SFKWF402B, WF-402B-UWB, WF-402B-UWB Location Beacon, Location Beacon, Beacon
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>