OPT7 Aura Pro Motorcycle LED Light Kit Smart Brake Installation Guide
- June 4, 2024
- OPT7
Table of Contents
OPT7 Aura Pro Motorcycle LED Light Kit Smart Brake Installation Guide
COMPONENTS
INSTALLATION
STEP 1
Inspect kit to ensure all contents was included.
STEP 2
Decide where to locate the light strips and ensure wiring has enough length
for control box to be installed in desired location.
EXAMPLES
STEP 3
Scan the QR code on the back of the control box to download the app.
STEP 4
Secure Control box in desired location with Velcro or zipties.
- The control box is NOT waterproof.
Tuck it away from the elements.
STEP 5
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE or ELECTRICAL TAPE around the LED
connectors to ensure the longevity of the lighting kit.
STEP 6
Open the OPT7 AURA App, pair your smart device to the control box, and pick
your desired color!
AUX WIRING FOR A DOOR/DOME LIGHT
You may choose the desire color choice directly on the Aura app.
This feature will activate when the aux wiring is connected to the trigger wire for door light or positive wire of dome light.
* NOTE: Trigger wire for door light is recommended if your dome light lights up progressively when opening door.
OPT 7 AURA APP
QR Code to download
App store
Google play
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
