CANARMNA IOL607 Easy Connect Instruction Manual
- June 14, 2024
- CANARMNA
Table of Contents
EASY CONNECT
INSTALLATION INSTRUCTIONS™
IOL607
10/22
IOL607 Easy Connect
NEED HELP?
Call or Email us first
Our service team is ready to answer your questions…
1-800-265-1833 (English) /
1-800-567-2513 (French)
IN CANADA – ressalescanada@canarmna.ca –
IN USA – ressalesusa@canarmna.ca
Monday-Friday
8 AM – 5 PM E.S.T.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
-
Attach Easy Connect™ mounting bracket to electrical box with electrical box screws (not included).
-
Option 1: Connect (push) electrical wires from electric bo(house wiring) into correct inserts.
Option 2: For multiple green (ground), black (live) and white (neutral) wires joined in the electrical box (house wiring),attach a single “green”, “black” and “white” jumper wire before connecting. Strip 7mm from the 6” jumper wires supplied. Then connect (push) wires into the correct inserts. -
Connect (push) electrical wires from fixture into correct inserts.
-
Tuck electrical wires into electrical box and position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
-
Install specified bulb type and wattage (not included).
-
After installation, seal around the top and side perimeter between the fixture and the wall surface with weather resistant caulk. The bottom should be left un-caulked to prevent moisture build-up. Apply a small amount of weather resistant caulk around the side perimeter between the cap nuts and mounting plate.
Tel: 613-342-5424, Fax:
800-263-4598
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>