CANARMNA IPL1123A01XX9 Pendant Light Instruction Manual
- June 14, 2024
- CANARMNA
Table of Contents
PENDANT LIGHT
IPL1123A01XX9
10/22
IPL1123A01XX9 Pendant Light
NEED HELP?
Call or Email us first
Our service team is ready to answer your questions…
1-800-265-1833 (English) /
1-800-567-2513 (French)
IN CANADA – ressalescanada@canarmna.ca –
IN USA – ressalesusa@canarmna.ca
Monday-Friday
8 AM – 5 PM E.S.T.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Wiring supplies
as required by local electrical code
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
- Loosen “B”. Adjust stud to desired length and lock in place with “B”.
- Mount the mounting bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
- Adjusting the length of flexible cord. For safety, do not release the knot inside canopy.
- Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
- Once wire connections are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
- Install the light fixture to the ceiling by aligning the holes in the fixture with the studs on the mounting bracket. Secure fixture in place with star washers and cap nuts.
- Install proper bulb type and wattage (not included).
- Screw the glass shade on to the fixture. Ensure the glass is securely attached to the fixture.
- Screw the rod on to the glass.
WARNING
Warning – HOT :
Do not touch any metal surface.
Tel: 613-342-5424, Fax:
800-263-4598
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>