Adexa HEG-824 Commercial Griddle Smooth User Manual
- June 14, 2024
- Adexa
Table of Contents
User Manual
Electric
Heavy Countertop Griddles
Commercial Heavy Grill
SERIES >>>
www.adexa.co.uk
Congratulations on your purchase of Adexa direct equipment! we take pride in the design, innovation, and quality of our products. To ensure optimal performance, we have outlined the following instructions and guidelines in this manual carefully for your review.Cooking Performance Group declines any responsibility in the event users do not follow the instructions or guidelines stated here
Features & Specifications
- 1″ thick chrome plated griddle for enhanced heat distribution and quick recover Snap-action thermostat from 0~300°C
- 14CM Thickness provides greater cooking surface.
- Easy to remove and clean
- Adjustable heavy-duty stainless steel non-skid feet
MODEL | Dimension | Volts | Power | Temperature Control |
---|---|---|---|---|
HEG-824 | 610620360mm | 380V | 8KW | 0~300°C |
HEG-836 | 915620360mm | 12KW | ||
HEG-848 | 1215620360mm | 16KW |
Safety Precautions
CAUTION:
Equipment is designed to provide safe and productive processing,cooking and
warming of food products as long as the equipment is used in accordance with
the instructions in this manual and is properly maintained.
Failure to comply with the following operation instructions could lead to
potential hazards and/or unsafe practice and could result in injury and damage
to product and property.
Owners of this equipment bear the responsibility to make certain that this
equipment is used properly and safely, and to strictly follow all of the
instructions contained in this manual and the requirements of local, state or
federal law.
Owners should not permit anyone to touch this equipment unless they are over
18 years old,are adequately trained and supervised,and have read and
understood this manual.
Owners should also ensure that no customers,visitors or other unauthorized
personnel come in contact with this equipment.
Please remember that vender cannot anticipate every circumstance or
environment in which its equipment will be operated.
It is the responsibility of the owner and the operator to remain alert to any
hazards posed by the function of this equipment.
If you are ever uncertain about a particular task or the proper method of
operating this equipment, ask your supervisor.
This manual contains a number of precautions to follow to help promote safe
use of this equipment. Throughout the
manual you will see additional warnings to help alert you to potential
hazards.
NOTICE:
This product is intended for commercial use only. Not for residential use.
WARNING:
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other equipment.
Improper installation,adjustment,alteration,service or maintenance could lead
to property damage,injury or death.
Read the installation, operating and maintenance instructions thoroughly
before installing or servicing CPG equipment. This manual must be retained for
future reference.
A factory authorized agent must handle all maintenance and repair.
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE:
All containers should be examined for damage before and during unloading. The
freight carrier has assumed responsibility for its safe transit and delivery.
If equipment is received damaged,either apparent or concealed, a claim must be
made with the delivering carrier.
Apparent damage or loss must be noted on the freight bill at the time of
delivery. It must then be signed by the carrier representative (ie: driver).
If this is not done, the carrier may refuse the claim. The carrier can supply
the necessary forms.
Concealed damage or loss if not apparent until after equipment is uncrated, a
request for inspection must be made to the carrier as soon as possible. Please
confirm the time frame with the carrier as this can vary. The carrier should
arrange an inspection. Be certain to hold all contents and packaging material.
Installation and service should be performed by an authorized service agency.
All Adexa griddles should also be installed under an approved hood. CPG
Limited Warranty does NOT cover equipment that fails to follow these
guidelines or has been altered, modified,or repaired by anyone other than an
authorized service agency. If you have questions concerning the
installation,operation,maintenance, or service of your equipment, visit Adexa
website at www.adexa.co.uk
Make sure that the stand or countertop where you plan to locate the commercial
griddle is capable of supporting its weight along with any accessories.
Adequate clearance should be provided for proper operation and servicing.
Level the commercial griddle once you’ve uncrated it in your facility using
the adjustable feet.
Proper ventilation is crucial to safe and optimum performance. Ensure that the
griddle is installed underneath a ventilation hood according to all applicable
local and national codes
Installation
WARNING:
IMPROPER INSTALLATION,ADJUSTMENT,ALTERATION,SERVICE,OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY, OR DEATH.
READ THE INSTALLATION,OPERATING,AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE
INSTALLING OR SERVICING THIS EQUIPMENT.
THESE UNITS ARE SUITABLE FOR INSTALLATION ON NON-COMBUSTIBLE SURFACES ONLY. DO
NOT INSTALL NEAR ANY COMBUSTIBLE SURFACES OR ANY OTHER EQUIPMENT.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE
VICINITY OF THIS OR ANY OTHER EQUIPMENT.
LOCATING AND LEVELING THE UNIT
For non-combustible surfaces, do not install the unit closer than 1″ from a
side wall and/or closer than 1″ from a rear wall.
Your griddle includes four adjustable feet. Ensure that all feet are installed
correctly before the operation of this griddle.
Level unit by adjusting the (4) feet which have an adjustment of 13/4″
(43.75mm) for accurate leveling and perfect line-up with other Adexa series
units.
EXHAUST CANOPY
This product conforms to UL-197 standards and is required to be installed
under a ventilation hood in accordance with all applicable codes.
A vertical distance of not less than 48″ shall be provided between the top of
the appliance and filters or any other combustible material.
Exhaust installation must conform to local codes.
The griddles are designed to operate only for the voltages indicated on the
data plate attached to this griddle, and for alternating current (AC) only.
380V service for all mode
General Operation
COOKING WITH A PLATED GRIDDLE
CAUTION: CHROME PLATED GRIDDLES ARE DELICATE PIECES OF EQUIPMENT.
DO NOT hit, chop, hack, or cut on the griddle plate. DO NOT use a griddle
stone, brick, or screen. Damage caused by these utensils is irreparable.
Your new Adexa plated griddle has excellent heat retention and heat transfer
as well as minimal flavor transfer.Adexa has created a griddle that offers a
reduction in energy costs and clean up time, translating into a great deal of
profit savings.
Since the chrome plated griddle has such a high level of heat retention, it
acts as a heat shield that does not allow as much upward radiation,creating a
cooler work environment. The significant amount of heat retained on the chrome
griddle also allows for a rapid heat transfer, which produces faster cook
times at lower temperatures.
Unlike steel plate griddles, the chrome plate on the griddle prevents food
particles from getting trapped on the cooking surface, thus preventing flavor
transfer. In other words, your pancakes for breakfast will not taste like last
night’s salmon.
The finish on chrome-plated griddles is delicate and must be handled with
care. Be sure to follow suggested guidelines for care and maintenance to
prevent voiding the warranty.
SEASONING THE GRIDDLE COOKING SURFACE
NOTE: Seasoning is not required for chrome plated griddles, but the below
procedure may be done to improve the non-stick qualities of the cooking
surface.
- Clean the griddle surface thoroughly.
- After the griddle has been thoroughly cleaned, it should be seasoned to prevent food from sticking.
- Before using and after each thorough scouring, season the griddle heating surface in the following manner.
- Turn temperature control dials to (150°C), and pour on a small amount of cooking oil or shortening, about 1 oz. (30cc) per square foot of surface.
- Using a clean cloth, not a spatula,spread a thin film of cooking oil or shortening over the griddle cooking surface. This film should remain on the hot griddle surface for half an hour.
- Remove the excess oil and wipe clean.
- Repeat this procedure twice more. The griddle surface should now be ready for use.
AFTER EACH USE
- Scrape the griddle with the appropriate scraper or flexible spatula to remove the excess grease and food.
- Scrape drippings into the grease tray and dump.
DAILY CLEANING
- Clean plate while still hot between 300-350°F.
- Scrape griddle plate with blade scraper ONLY.
- Pour room temperature water (or for heavy duty cleaning, Noble Chemical Griddle Kleen cleanser (#147GKCHROME) on the surface and immediately scrub the griddle with a natural non-scratching stiff bristle brush. Repeat as needed.
- Sweep the water or cleanser into the trough drain at the front of the griddle. Wipe off and polish the surface with a clean lint free cloth and polish solution suitable for chrome griddles (Noble Chemical Griddle Kleen Polish Powder (#147GKPOWDER).
- Rinse with room temperature water to remove any excess polish.
- Prior to cleaning the body of the unit, always be sure to turn off the griddle and allow it to cool completely before attempting to clean.Thoroughly clean the backsplash, sides, and front of the griddle with a non-abrasive sponge and cleaning solution.
- Remove the grease tray, empty it, and thoroughly clean.
- Apply a light coat of cooking shortening to prevent rust on the griddle plate.
RECOMMENDED CLEANING PRODUCTS NOBLE
Fast-acting formula quickly removes grease and other buildup.
Can be used on a pre-heated surface for even greater results.
CHEMICAL
Non-flammable for the best in safety and peace of mind.
147GRIDDLKLN
Easy application helps ensure effective cleaning by even
Griddle Kleen
inexperienced workers.
Liquid Grill/Griddle
Available in 32 oz. bottles and 3 oz. QuikPacks
Cleaner
579GRILLGEAR
Has everything you need to keep your griddle clean without damaging the
plating
Griddle Gear
Griddle Cleaning Kit
Improves cooking performance of griddle
Caddy keeps this kit organized and makes it easy to transport Includes
Cleaning Pads,Scraper,Noble Chemical Blast Oven & Griddle Cleaner, and a Tote
Box
Troubleshooting
NOTE: These examples are provided for your reference. Provided a failure occurs, stop using the griddle immediately and contact an authorized service agency. All maintenance should be done with the power supply shut off.
Possible Causes
Heat is set too high| Solutions
Turn heat down
---|---
Moisture in the food is turning into steam
Heat is set too high| This is normal, no solution necessary
Turn heat down
Griddle surface needs to be cleaned and/ or re-seasoned
Heat is set too high or too low| Clean griddle surface (page 10)If food is
cooked on the
outside,turn heat
down and increase cook time
| If food is not cooked on the outside, turn
heat up
Food may have not been cooked for long enough time
Circuit breaker off or tripped
No power, thermostat OFF, or thermostat failure| If undercooked on the
outside,turn heat up and increase cook time
Reset the circuit breaker
Check power and ensure the thermostatis set to the desired temperature.If
problem persistscontact service agent
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>