levenhuk 43 Digital Magnifier User Manual
- June 14, 2024
- levenhuk
Table of Contents
levenhuk 43 Digital Magnifier
Product Information
Specifications
- Magnification: 6x, 8x, 10x, 14x
- Screen Size: 4.3 inches
Product Information
The Levenhuk DTX 43 Digital Magnifier is a versatile magnification tool that allows you to view objects with different levels of magnification. It features a 4.3-inch screen and offers magnifications of 6x, 8x, 10x, and 14x. The magnifier is equipped with various functions and features for easy use.
Product Usage Instructions
Using the Magnifier
To use the Levenhuk DTX 43 Digital Magnifier:
- Ensure that the power is on.
- Select the desired magnification level (6x, 8x, 10x, or 14x).
- Place the object you want to magnify under the lens window.
- Use the magnify button to adjust the focus and zoom in on the object.
- Press the capture button to take a picture of the magnified image. Use the delete button to delete unwanted pictures.
- Use the color mode button to switch between different color modes.
- When finished, turn off the power by pressing the power on/off switch.
Output to Monitor with TV-in
You can connect the Levenhuk DTX 43 Digital Magnifier to a monitor with TV-in using a TV video cable. Follow these steps:
- Connect one end of the TV video cable to the TV out port of the magnifier.
- Connect the other end of the TV video cable to the TV-in port of the monitor.
- Turn on the power of the magnifier.
- Switch on the monitor and select the appropriate input source.
- You will be able to see live video from the magnifier on the monitor.
Power Off and Battery Safety
To turn off the power of the Levenhuk DTX 43 Digital Magnifier, press the power on/off switch located at the side of the device. Itis recommended to always turn off the magnifier when not in use to prolong battery life. The magnifier will automatically turn off ifit is not used for 5 minutes. It is important to follow battery safety instructions provided in the user manual to ensure safe usage of the magnifier.
Troubleshooting
If you encounter any issues with the Levenhuk DTX 43 Digital Magnifier, refer to the following troubleshooting tips:
- The screen is blank: Ensure that the power is on.
Parts
Magnifier parts
- TV out
- MicroSD slot
- USB port/DC in
- Forward/Freeze
- Playback
- Backward
- Magnify
- Capture/Delete
- Color mode
- Power on/off
- Battery compartment
- Lens window
- Foldable stand
- Indicator light
Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser through this device, as this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Care and maintenance
To keep your magnifier in good condition, observe the following guidelines:
- Read the instructions in this user’s manual before attempting to use the unit.
- Do not attempt to repair the magnifier or open its case. This product contains no user serviceable parts.
- Keep the magnifier away from wet areas, rain, and other sources of liquids. Do not submerge the unit.
- Always operate the magnifier in a place where the temperature is 0–45 °C (32–113 °F).
- Always store the magnifier in a cool and dry place at normal room temperature.
- Do not attempt to force any connector into the unit’s USB and microSD ports. All appropriate connectors should fit easily into the ports.
The kit includes: portable digital magnifier, AC adaptor, Li-ion Battery, TV-out cable, USB cable, carrying bag, cleaning fabric, user manual.
Magnifier functions
Loading battery
- Please use the Li-ion battery to power the magnifier. Slightly push and pull the battery door latch to open the battery compartment.
- Load the battery according to the polarities shown inside the battery compartment, and then snap close the battery door.
Note: Remove the battery when it is not in use for a long period of time.
Charging the battery
Before using the magnifier, you must charge its battery.
- Plug the miniUSB connector of the USB cable into the miniUSB port located on the right side of the magnifier. Then plug the USB connector of the USB cable into the port on the power adaptor, and next plug the power adaptor into a standard AC outlet.
- When the battery gets charged, the LED indicator turns off. Unplug the magnifier.
- You can now use your magnifier for up to two hours of continuous use. When the battery is low, the low-power indicator will blink on the right down corner of the screen. Then you have to connect the power adaptor and plug it in to recharge the battery.
Note: Always turn the magnifier off during charging. The battery will not charge if the magnifier is left on.
Reading with the magnifier
To read with the magnifier, operate as the following:
- Turn on the unit by pressing the Power ON/OFF switch located on side.
- Pull out the foot of the magnifier until it sits at its maximum range.
- Place the magnifier flat against the text you want to read.
- Slide the unit gradually to the right to read to the end of the line. Slide the unit down and back to the left to read the next line of text.
- To change the level of magnification, press the Magnify button.
- To change the colors used on the screen, press the Color Mode button until you find the mode best suited for your vision needs.
Using the magnifier
- Color Mode selection
- Press the Color Mode button to cycle through the magnifier’s 7 different color modes as follows: full color, black on white, white on black, blue on white, blue on yellow, yellow on black, yellow on blue.
- Magnification adjustment
- Press the Magnify button to cycle through the four level of magnifications: 6x, 8x, 10x or 14x.
- Freeze image
- Press the Forward/Freeze button to switch between freezing and unfreezing the current image.
- Capture photo
- Load a microSD card (not included) into the microSD card slot. Press the snapshot capture button to capture a photo. The captured photos will be automatically stored in the microSD card.
- Playback
- Press the Playback button to view captured photos. Press the Forward button or the Backward button to move forth or back.
- Press the Playback button again will return the magnifier to reading mode.
- Delete
- Press the Playback button to view captured images. Press the Capture/Delete button to delete an image.
- Download captured pictures to a PC
- Connect the magnifier to a PC using a standard miniUSB cable. Plug the miniUSB connector of the cable into the miniUSB port on the side of the magnifier, then plug the standard USB connector of the cable into the PC. Turn the power on. You can now download the captured pictures to the PC.
- Output to monitor with TV-in
- Connect the magnifier with monitor with TV-in by TV video cable, turn the power on and then you can see live video on the monitor.
- Low battery indication
- If battery power is low, a symbol appears on the lower right corner of the screen, indicating that you have to charge the battery.
- Power off
- Turn off the power of the unit by pressing the Power ON/OFF switch 10 located at the side.
- To prolong the battery life, please always turn off the magnifier when not using it.
- The magnifier will turn off automatically if it is not in use for 5 minutes.
Troubleshooting
Problem/ Solution
- The screen is blank
- Ensure that the power is on.
- Ensure the battery has enough power.
- Verify that the item you want to magnify is positioned correctly under the center of the screen.
- The unit can’t be turned on
- Change the battery with a new one.
- Check the installed battery’s position.
- The image on the screen is dark and/or distorted
- Ensure that the unit is positioned flat on the page you are reading.
- Ensure that the foot of the magnifier flips out to its maximum position.
- There are smudges or blemishes on the screen
- Clean the screen and the Lens (located on the bottom of the unit).
- Text is too small to read
- Press the magnify button.
Features
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>