ADLER AD 2828 Professional Pet Clipper User Manual
- June 6, 2024
- ADLER
Table of Contents
ADLER AD 2828 Professional Pet Clipper
Parts
IMPORTANT INSTRUCTIONS ON SAFETY
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purposes.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Never use this device close to water, e.g.: Under shower, in bathtube, or above sink filled with water.
- If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
- Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
- Do not touch the device or power adaptor with wet hands.
- The device has to be turned off after every use.
- Do not leave the unit on to the wall outlet or power supply unit unattended.
- If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
- Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
- The cutting blades are very sharp. Be careful during assembly, disassembly and cleaning. Do not touch the blades moving parts during operation!
- Do not wash the blades in the water.
- Change the attachments only when the unit is turned off.
- Use only original accessories.
- To remove hair from inside the machine, use only the included brush.
- Do not use the device in the bath.
- Do not use the device on people who are sleeping.
- During operation, do not place the device on wet surfaces or clothes.
- The device is not designed to work with external schedulers or separate remote control system.
DESCRIPTION OF THE DEVICE
1. On/Off switch
2. Head
3. Comb attachment
4. Cutting length without comb attachment adjusting lever
5. Power cord / Adpator
USING THE DEVICE
Before starting to fully develope electric cable. Put comb (3) on the head (2)
or select the cutting length using lever (4). Start clipping leading razor
with a comb in the direction “against the grain”. This should be done slowly
and at constant speed.
CHARGING THE BATTERY
Charge the battery before use. To begin charging plug the power cord into the
trimmer’s socket, and the charger into a 220-240 V 50/60 Hz mains power
outlet. The charging indicator will light up . The light will remain on until
the device is unplugged from mains power. The first charge takes 12 hours;
subsequent ones should last 8 hours. A fully-charged battery lasts for
approximately 210 minutes of continuous use. After charging, unplug the
charger from
the socket. If the trimmer is not used for a long period of time, it should be
charged at least once every 6 months. In order to maintain adequate battery
capacity. If the battery is flat, you can continue cutting using the charger.
To do this plug the charger cable into the trimmer socket. After 2 minutes you
can
continue cutting.
CLEANING
Disconnect the device from power. Blades clean using the brush. After cleaning, between the blades should be no hair. Every few haircuts sweep the hair from the middle of the head, by removing the 2 screws previously. Clean the housing with a dry or slightly damp cloth. Every few haircuts oil the cutting head, dropping in 2-3 drops of machine oil in the space in the space between the fixed blade and movable blade.
TECHNICAL DATA
Power supply: 220-240V ~ 50 / 60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>