bonsaii C149-D 15 Sheet Micro Cut Paper Shredder Instruction Manual

bonsaii C149-D 15 Sheet Micro Cut Paper

Paper Shredder C149-D
Instruction Manual
15-Sheet Micro-Cut Shredder

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.

Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped.

IMPORTANT!

1. Please read all instructions carefully and retain instructions for future reference.

2. Read through each step carefully and follow the proper order.

3. Please place this machine on a flat and stable surface place, please be careful and cont to the machine over ” In case the machine is broken and cannot be used as normal.

4. The device should be set up as close as possible to an easily accessible wall ASSERRIFI

5. Dangerous, please do not disassemble, modify or repair the machine in any way on vour Own.

6. To avoid electric shock, hurting or accidental injury.

7. When you empty the basket, or move the machine, or no need to use the machine for a certain period of time Please kindly make the machine under OFF status and ” To avoid fire accident or electric shock.

8. Please don’t use intlammable liquids. gases. water and cleaner to clean the

   • To avoid tire accident or elecine stock. &. Please don’t use the machine in a very nion temperature. very humidity and veryheavv dust environment “To avoid fire accident, electric shock or machine malfunction

9. Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the machine for shredding.
   To avoid damaging the machine

10. Please do not damage or process the power cables, or do not place heavy
    oblecis on the cables,
    To avoid fire accident or, hurting or electric shock

11.  It abnormal conditions such as smoke or odor occurred, please disconnect the
    Dower and stop using I immediatelys

    •  To avoid fire accident or electric shock

12. Please do not use it the shredder or the power cable is damaged or detective

    • To avoid fire accident or electric shock

IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE

User information/safety instructions.

WARNING

• Please kindly let children and pets keep away from the machine.

  • There are sharp blades inside the machine so as to avoid injury.

• Please kindly let your hands keep away from the sharp blades and feeding opening of paper shredder.

  • There are sharp blades inside the machine so as to avoid injury.

• Please kindly let your hair keeps away from the feeding opening of paper shredder.

  • If your hair is accidentally sucked in, Please kindly use the “Reverse function” and get rid of the danger.

• Please kindly let your clothing or some small items keep away from the feeding

• opening of paper shredder like tie, necklace, sleeves, jewelry, etc ..

• Please don’t use inflammable liquids, gases water and cleaner to clean the machine.

  • To avoid fire accident.

• Please kindly don’t touch the sharp edges to avoid injury .
  This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.

• It cannot be over 15 sheets in one time for the quantity of shredding.

KNOW YOUR SHREDDER

For safety reasons, shredder will operate only if the shredder head is in correct position and used with supplied basket.

1. (D Power switch(ON/OFF)
2. Control panel (Control shredder’s three status “REV” “AUTO” “BLANK”)
3. Blank position ( stop working status)
4. Reverse Position (“Release the paper”)
5. Auto position (under work status)
6. Power light (work status in red)
7. Overload indicator light (overloading in red with flashing)
8. Overheat indicator light(Overheating in red)
9. Feed opening
10. Basket handle
11. Basket
12. Transparent Window
13. Caster brake
14. Shredder’s caster

TECHNICAL SPECIFICATIONS

Voltage

| 220-240 VAC, 50/60Hz| |
---|---|---|---
Feeding Opening| 15 sheets/time (A4 80g/m2 )| Feed Opening| 5.5×222 mm
Capacity| one sheet of credit card/time| (W*L)| 0.22×8.74 Inches
| one sheet of CD/time| |
Shred Type

Basket Capacity

| Micro cut

6.08Gallon/23L

| Shred Paper Size

Basket type

| 4x12mm (0.16×0.47 inches)

Pull out

Product Size (LWH)

| 360 x 285 x 545 mm 14.17×11.22×21.46 inches)| |

OPERATING INSTRUCTIONS

1. Plug in and press the power switch” – “.

2. Moving “control panel” from “blank” to “Auto “position, Power light in red. (Feed papers, credit card, CD,clips or staple to shred.}
    Continuous operation around 60 minutes.
   WARNING
   aeware of injury caused by CD splashing or incorrect CD shredding. Please wear safety goggles and shred the CD in a correct way.

3. When finished shredding, set to Blank position and turn off the power switch “O”.

Jam: Please move “control panel” to “REV” position and pull out the jammed paper

• Moving “control panel” from “Auto” to “REV” position for 3-5 seconds staying. (If it meets a very serious jam, Please kindly repeat this operation around 2-3 times )

Overheat (overheat in red, Power light in red, need to wait for cooling down.) Cool down around 10 minutes

Overload (Overloading in red with flashing, power light in red, need to take out excess papers.)

PRODUCT MAINTENANCE

1. Plug in and press the power switch ” – “
2. Moving “control panel” from “blank” to “Auto ” position, power light in red .( Feed one shredder lubricant pack to shred)
3. Move “control panel” from Auto to “Reverse” for 2-3 seconds staying (don’t pull out the shredder lubricant pack)
4. Move “control panel” from REV to AUTO to shred the shredder lubricant pack for 3-5 seconds staying and repeat the actions for 2-3 times till the shredder lubricant pack is fully shredded.
5. When finished shredding, set to Blank position and turn off the power switch “O”.

CAUTION

• Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack ( LS24 )/12-Pack ( LS12).(no cleaner ,inflamma­ble liquids ,gases oil etc … )

TROUBLESHOOTING

Malfunction

| ****

Reason

The power plug doesn’t connect to the power supply.

| ****

Solution

Please kindly check whether you use the machine with related supply voltage or Plug in again correctly.

---|---|---

Stop Working

| Power supply voltage is too low or no power supply.| Please kindly find a related supply voltage to use it .
The machine is under overheating protection, because the machine is over the continues working

capacity.

| ****

Wait for the machine to cool down naturally.

The thickness of paper is too thin.

| To make the paper thicker ,You can add more papers or fold the paper.

The machine is overloading, because the paper is over machine Max shredding quantities.

| Reduce paper quantity with an acceptable amount and place the paper into the feeding opening of shredder again.

Damage of power cable.

| Please replace the power cable with the same parameters by professional person or contact with our

customer service.

The basket is full.| Empty the basket.
Defective of machine.| Please kindly contact with our customer service.

Jam **Paper jam.**

| Please kindly use the function of “Reverse” to take out the excess paper.
Paper dust and other foreign objects cover the sensor.

Keep Running The location of sensor is in the

shredder’s feeding opening look like glass beads or marbles.

| 1. Please unplug first and use soft cloth

or cotton swab to clean the foreign objects without any cleaner or water .

2. lf there are some paper scraps around the sensor area ,please kindly use cotton swab or needle nosed pliers to take out the paper scraps .

__   don’t overexert and use Sharp tools to clean or poke the sensor to avoid damaging the sensor.

Loud Noise     The shredder is placed on an

unsuitable place.

| Change the location.

If the above answers can not solve your problems, please kindly contact with our customer service team via email customer-care@bonsaii.com

Disposal:

Directive 2012/19/EU concerning the handing, collection, recycling and disposal of electrical and electronic equipment and their components (‘waste electrical and electronic equipment’, known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be disposed of but it must be handed over to a suitably equipped collection centre for proper recycling or disposal.

Directives:

• This machine corresponds to the requirements according to EU Directive 2014/30/EU entitled ‘Electro-Magnetic Compatibility’ and 2014/35/EU entitled ‘Low-Voltage Directive’.
• The product corresponds to the requirements according to UK Directive regulation technical documentation as well as the UK declaration of conformity the required UKCA marking .
• The packaging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

LIMITED WARRANTY

• We stand by our product and offer a 30-day money-back guarantee. During this time, you could return the item without paying any extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable.

• If the product isn’t meeting your expectations, please email within 30-days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from Bonsaii is non-refundable.

• If you receive a damaged product, you must notify Bonsaii within 48 hours of delivery. Bonsaii will investigate the claim and notify the freight company about the damage. Please retain all packaging in the event that Bonsaii or the freight company needs to inspect it. These investigations may take several days but merchandise replacements will be processed as soon as possible.

• For product arrived defective or damage, We’re sorry to hear that your Bonsaii product arrived in less than perfect condition. We’d like to resolve this issue right away with the help of our Customer Support Team and Quality Assurance team. They’ll need to know a bit of information on your order as well as the issue you’re experiencing with your Bonsaii product. To report your issue, please reach out to our Customer Support team by emailing customer-care@bonsaii.com with your order number. We may need you to make a short video, or take some pictures of the defects of the product and send them to customer-care@bonsaii.com. After a preliminary analysis on the video or pictures, we will send you a brand new replacement right away if it is confirm to be defective on its arrival. If we determine that you have misrepresented Bonsaii product’s condition and that product is not defective, we will send you the right instructions and help you to use the product correctly.
  If you have any questions or any confusions, Please kindly contact with us: customer-care@bonsaii.com.

• Manufacture: Bonsen Electronics Limited 0 : No.11-12, Lun Pin Chong Industrial Zone San Tun Community, Hou Jie Town 523941 Dongguan City,Guangdong PEOPLE’S REPUBLIC OF CHINA
  customer-care@bonsaii.com

TAN MET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR,UK tanmetbiz@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>