ClicBot B08GK8856T Entertaining and Educational Toy Instruction Manual
- June 3, 2024
- ClicBot
Table of Contents
ClicBot B08GK8856T Entertaining and Educational Toy
ClicBot App Installation
You can find and download the ClicBot App on the App Store/Android, or scan
the QR code below to download.
- The ClicBot App supports iOS 10, Android 5.0 and higher versions.
Advice on Using
The Quick Start Guide gives basic instructions on how to control your ClicBot.
Please refer to the User Manual for detailed information on the product,
including module specifications/connections, how to charge the battery,
security & privacy, after-sale services, and FAQs. Please see the Module
Function Card for information on the operational applications and how to use
each modular function.
Usage Instructions
- Contains small parts, not suitable for children under 3 years old;
- Contains precision parts, avoid dropping;
- Keep away from flammable objects;
- Keep your ClicBot dry; keep the product away from water;
- Keep the golden module “po-go” pins away from metal;
- Do not directly or indirectly connect two or more brain modules together;
- Do not remove or replace the built-in battery; please contact our after-sales service team for repairs in case of damage;
- The charger is not a toy, only use the charger recommended (the output voltage recommended: DC 5V/2A);
- Do not use while charging;
- Do not force your ClicBot to move when the movement function is locked;
- Do not touch the ClicBot while it is moving; When finished with the ClicBot, please recycle it; do not carelessly discard it and pollute the environment;
- This package contains important information, please keep it at hand.
Introduction to ClicBot
ClicBot is an intelligent robot designed for kids & adults with built-in functions for education and entertainment.
ClicBot has a unique modular design, which makes it easy to assemble and disassemble, create all sorts of imaginative robots, and allows for thousands of programmable functional uses. This makes ClicBot is more than just a robot, companion, or even toy – but additionally as a means of creative expression, learning, and experiment. ClicBot is also alive with over 200+ unique interactions. With its big, blinking eyes, and sound module, ClicBot is able to interact with you in a very lively way. ClicBot can see, feel, hear, think, communicate, and perform lots of actions. Reaching out to pet its head will cause ClicBot to react sweetly towards you, while programming it to recognize
you will allow it to warmly greet you when you interact. You can also program ClicBot to react in specific ways, so you can be very imaginative in your creations.
Through the ClicBot App there are a variety of easy-to-use programmable tools, robotic design setups, and features that let you share your creations with the community. Build an exciting racing robot, cute animal companion, a wall climbing adventurer, a bionic explorer, and many other exciting possibilities.
ClicBot is designed to help children shape the future with STEAM learning.
Through the app, there are two creative functions that allows for scripting
programs in ClicBot, motion or ‘demo’ script, and drag & drop graphical
programming. Motion script means users only need to make & save adjustments
made to ClicBot in order
to play back the entire routine in an easy and smooth manner. For more
intermediate and advanced actions, users can use the drag & drop graphical
programming feature to create a wider variety of amazing programs and actions.
To help guide children in realizing the full potential of their ideas and
creativity, the makers of ClicBot will produce a series of STEAM videos to
better guide children on
how to build, program, and play with different robotic creations.
Additionally, you can share your magical creations or search for inspiration
through the ClicBot App Community. Simply upload your artworks, photos, code
programs, or robotic designs for others to download and try for themselves!
Specification of Modules
Brain Module
The Brain module is the master control and power supply unit of the ClicBot.
It uses an ARM-A7 processor and includes a rechargeable polymer lithium
battery with a capacity of 1550mAh. The eye of the ClicBot is a 2.1-inch
rotational, circular touch screen. It contains a camera & facial recognition
software, gesture sensors and camera optics can be found within the upper-left
area of the screen. There are three touch sensors which are located on the
upper, left, and right side of the Brain respectively, and two connectors are
located on the upper and bottom rear side. The Brain module is integrated with
a number of the function modules, and it includes an accelerometer, gyroscope,
microphone, loudspeaker, and WiFi.
Joint Module
The Joint module, which is the “joint” of the ClicBot, is used for integrated
motion. It functions with a high-precision servo system and uses a built-in DC
geared motor, and build-in angular rate/angle position sensors. There are four
connectors in total, two in each hemisphere. Each connector has a status
indicator which shows the connection and update status in relation to other
module pieces.
Dimension | 55 mm (diameter) |
---|---|
Net Weight | 73 g |
Rotation Voltage | 2.64 W |
Max. Rotor Speed | 216°/s |
Connector | 2 in each hemisphere |
Status of Joint’s indicator
Connection Status
- Light On →Connected correct
- Light flashing →Waiting for module
connection
- ght flashing quickly →Connection is wrong
Update Status
- Light On →Successfully updated
- Light flashing →Currently updating
Skeleton module
The Skeleton module is the ‘bone’ of the ClicBot, and is primarily used
for building limbs. There are two connectors at the top and bottom of the
Skeleton, and two strip status indicators located on the front, which show the
connection and update status in relation to other module pieces.
Dimension | 37.837120 mm |
---|---|
Net Weight | 57 g |
Connector | Top and bottom |
Status of Skeleton’s indicator
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On→Successfully updated
- Light flashing→Currently updating
The color of Skeleton’s indicator can be changed in Drag & Drop program.
Wheel module
The Wheel module is a functional module used for vehicle setups. The Wheels
include a DC geared motor and a magnetic speed sensor, with a maximum rotor
speed of 4.5 rounds-per-second. There is a status indicator near the main
connector which shows the connection and update status in relation to other
module pieces.
Diameter of wheel | 83.8 mm |
---|---|
Net Weight | 140g |
Rotated Voltage | 2.4 W |
Max. Rotor Speed | 4.5 rounds per second |
Connector | 1 |
Status of Wheel’s indicator
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On→Successfully updated
- Light flashing→Currently updating
The color of Wheel’s indicator can be changed in Drag & Drop program.
Base Accessory – Mount
The Mount can be used to fix your ClicBot to a table with Mount Stickers.
Dimension | 75.175.145.2 mm |
---|---|
Net Weight | 61 g |
Please use the Mount stickers provided by KEYi Tech to ensure the product is fixed properly.
Reinforcement Accessory – Locker
The Locker is used to reinforce connections between two modules.
Dimension | 473614.4 mm |
---|---|
Net Weight | 10g |
It can be used for connecting modules when additional reinforcements are required.
- Connect Locker between modules.
- Rotate Locker.
- Rotate until baseline is aligned
Fixation Accessory – Holder
The Holder can be used to connect a cellphone or sports camera to your
ClicBot. It uses a standard 1/4 screw.
Diameter | 404086.6 mm |
---|---|
Net Weight | 55 g |
Degrees of Freedom | Universal joint on the bottom: 0°~180° |
Horizontal knob of the main part:
-90°~90°
Connector| bottom
Smart Foot module
The Smart Foot module is a functional sensor module that primarily serves as
the ‘feet’ of the ClicBot. The Smart Foot includes a highly-sensitive pressure
sensor and a micro-processor to control and measure terminal pressure.
Diameter | 39.341.869.4 mm |
---|---|
Net Weight | 41g |
Pressure Range | ² 9.8 N |
Connector | top |
Smart foot has a orange indicator. After connecting onto ClicBot, the luminance of the indicator will automatically brighten when pressure is increasing. The indicator can also indicate the connection status and update status.
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On Successfully updated
- Light flashing OFF Currently updating
Suction Cup module
The Suction Cup module is a functional actuator module. The Suction Cup
includes a negative pressure pump and a solenoid valve. By utilizing a micro-
processor, it can control the air current and turn on/off the value, allowing
the ClicBot to perform climbing functions. It also uses the air pressure
sensor to proactively check the stability of the ClicBot’s movement.
Diameter | 83.583.582.8 mm |
---|---|
Net Weight | 145 g |
Adsorption
Capacity
| Vertical direction: max.~20kg
Horizontal direction: max.~5kg
Buckle Position| Top
Suction Cup has a green strip indicator. The indicator light keeps breathing when Suction Cup is functioning and stays on if the suction is successful. The indicator can also indicate the connection status and update status.
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On→Successfully updated
- Light flashing→Currently updating
Distance Sensor module
The Distance Sensor module is a functional sensor module. It uses a high-
precision infrared probe and built-in micro-processor to control and measure
the distance from an obstacle.
Diameter | 404082 mm |
---|---|
Net Weight | 53 g |
Detection Distance
Range
| 2~100 cm
Degrees of Freedom| Universal joint on the bottom: 0°~180° Horizontal knob of
the main part:
-90°~90°
Buckle Position| Bottom
Distance sensor has a red indicator. After connecting onto ClicBot, the luminance of indicator will automatically brighten when the distance is shortening. The indicator can also indicate the connection status and update status.
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On→Successfully updated
- Light flashing→Currently updating
Grasper module
The Grasper module is a functional actuator module. It has a flexible bionic
design and is controlled via a built-in micro-processor. It is able to grasp
objects of various shapes and sizes.
Dimension | 7557165 mm |
---|---|
Net Weight | 98 g |
Max. Weight | 250 g |
Max. Dimension | 6 cm |
Buckle Position | Bottom |
Grasper has a yellow indicator which can also indicate the connection status and update status.
Connection Status
- Light On→Connected correct
- Light flashing→Waiting for module connection
- Light flashing quickly→Connection is wrong
Update Status
- Light On→Successfully updated
- Light flashing→Currently updating
Assemble the Modules
All ClicBot modules can be connected to each other by connectors. A connector contains an A-conn, a B-conn and ‘po-go’ pins. You can connect two modules by interlacing the A-conn and B-conn, and the golden po-go pins transfer instruction and supply power.
Note: Align the A-conn of one module with the B-conn of the other to connect two modules
Modules can be connected at opposite ends & in non-parallel directions.
- Parallel Connection
- Non-Parallel Connection
Battery Capacity and Charging
The battery status of the ClicBot is indicated by different colors on the Brain Module power light. It can also be checked on the system menu.
When the power is low, an alert will show on the screen. Please charge the battery to ensure normal operations and to maintain battery life.
Internet Connection
The Brain module can connect to the internet via Wi-Fi, and you can find
updates for functions on the cloud server.
How to connect to the internet:
- Open the ClicBot App, select the . Press “Network Settings” on the Brain Module, then enter your WiFi password. A QR code will generate – scan this to connect;
- Swipe upwards on the screen of the Brain Module to view the system menu, then select the Network “ ” icon to begin scanning;
- Using the ClicBot App, scan the QR code generated by the Brain module to connect to the internet.
- QR code generated in ClicBot App
- Scan the QR code with Brain module
Device Connection
Brain module can be connected to ClicBot App via router or hotspot.
It is suitable for remotely controlling setup by connecting to ClicBot App via
router in the Wi-Fi scenarios.
How to connect to ClicBot App via router:
- Connect Brain module and install ClicBot App to the same Wi-Fi;
- Open the ClicBot App, select the . Select Connect to Brain and then select Router Connection. The App will automatically search for the Brain Module connected to the Wifi Network. Choose the number of the Brain Module on the screen, and select Confirm to connect.
- Brain module in ClicBot App
Connection
Connection via hotspot is suitable when Wi-Fi is not available or the signal
is weak.
How to connect to ClicBot App via hotspot:
-
Swipe upwards on the screen of the Brain Module to view the system menu, then select the Device icon , and click “Hotspot Connection” to generate a QR code.
-
Open the ClicBot App, select . Click Connect to Brain and then select
“Hotspot Connection” to begin scanning. -
Scan the QR code with your mobile device to set up the connection.
- The QR Code Generated by Brain module
- Scan the QR code to Set up the Connection
Security Information
GB19865-2005 GB6675.1-2014 GB6675.2-2014 GB6675.3-2014 GB6675.4-2014
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2AWR5-KY002
RSS-Gen Issue 4 December 2014″&”CNR-Gen 4e Décembre 2014:
English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
French:
Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitationestautorisée aux deux
conditions suivantes:
- l’appareil ne doit pas produire de brouillage, et
- l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.
IC ID: 26344-KY002
User Privacy
We understand the importance of personal information security, and will make
every effort to protect the personal information of our users. We will take
all reasonable and practicable means to avoid collecting irrelevant personal
information. If it is necessary for us to do so, we will first obtain your
authorization to use your personal information and store this on a local hard
drive in accordance with relevant professional standards. Unless absolutely
necessary, we will only process your personal information on the local hard
drive, to avoid any unauthorized access, disclosure to the public, usage,
modification, damage or loss.
For specific privacy policies, please refer to the ClicBot App or visit www.keyirobot.com.
In the event of any defect to your ClicBot modular robot product or its accessories during use, we are committed to ensuring a 12-month maintenance- free service for any electronic components from the date of purchase, and a six-month service for any materials or motors from the date of purchase. This is in accordance with the User Manual, and provided that any faulty workmanship can be confirmed by a test technician.
Please contact support@keyirobot.com or your local retailer for any after-sales services.
Please keep your receipt on hand to ensure after-sales service.
FAQs
How to turn on/off ClicBot?
Long press the power button on the rear side of Brain module for 3 seconds
to turn on ClicBot.
Press the power button on the rear side of Brain module and then choose the
shutdown option to turn off ClicBot, or long press the power button for 4
seconds to force a shutdown.
Diagnostics – Auto Shutdown
To maintain the battery and motor performance, ClicBot will be shut down
automatically in the following situation:
- It hasn’t been operated over 20 minutes;
- Battery power is lower than 10%.
How long does ClicBot take a full charge and how long can it be used
continuously ?
It takes 2.5 hours at 5V/2A to have it fully charged, and it can be used
continuously up to 4 hours.
Is it a must to connect ClicBot to the internet while playing?
No, but it needs to connect to the internet to check for update.
Is it a must to control ClicBot Robot with ClicBot App?
No, it can be controlled manually with the screen of Brain module.
The maximum distance of remote control with ClicBot App
It depends on how to connect the robot to ClickBot App:
- Via router, it is up to 10m which may be different due to the performance of router.
- Via hotspot, it is up to 5m.
Can ClicBot functions be updated ?
ClicBot modules can be upgraded online. Connect Brain module to Wi-Fi, click
Home button and choose Update to check/download the update.
Connect other modules to Brain module to auto start the update, follow the
update instruction on the screen to upgrade modules.
The identification distance of gestures like shielding, waving and etc.
The gesture sensor is located in the upper-left triangle area of the screen of
Brain module. Please keep your hand at a distance of 5-20 cm when shielding
and waving, etc.
The detection distance range of Brain module
The gesture sensor is located in the upper-left triangle area of the screen of
Brain Module, and it can detect the obstacle at a distance between 5 and 20 cm
in front of robots.
The face identification distance of Brain module
The camera for face detection & recognition is located in the upper-left
triangle area of the screen of Brain Module, and it can identify faces at a
distance of 1 m.
The motion detection distance of Brain module
The camera for motion detection is located in the upper-left triangle are of
the screen of Brain Module, and it can detect the movement at a distance
between 1 and 5 m.
The role of the camera of Brain module
Brain module is equipped with a 1.2-megapixel camera which is capable for
controlling the robot from the first-person point of view, face detection &
recognition and motion detection.
The rotation range of the screen of Brain module
The rotation range of the screen is up to 24 degree in the horizontal
direction which can be set in ClicBot App. Please do not rotate the screen by
hand.
How to assemble a ClicBot Robot?
ClicBot is installed with a smart assembling guidance system. After choosing
which robot is to be assembled, there will be a step-by-step instruction shown
on the screen of Brain Module. The indicator light will flash to indicate
where to be connected. The system will automatically check whether all the
modules have been assembled correctly and show alert message on the screen in
case of any error while the indicator light is fast flashing. And the system
will automatically adjust the angle of connection as long as the two modules
are correctly assembled.
Diagnostics – why does the indicator light of a module flash?
The indicator light is used for indicating the status of a module, mainly
including:
- Solid light: Operation
- Breathing: Readiness
- Flashing: Waiting for being connected to a module
- Fast flashing: Connection error
Programming language applicable to ClicBot
Support Graphic programming and Python programming.
Editable modules applicable to ClicBot
Support over 20 editable modules, including the screen of Brain module,
loudspeaker, the motor of Joint module, the motor of Wheel module, and the
color of the strip lights of Skeleton module.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>