GTRACING Gaming Chair with Footrest Speakers Instruction Manual
- June 3, 2024
- GTRACING
Table of Contents
Gaming Chair with Footrest Speakers
**Instruction Manual
**
ASSEMBLY INSTRUCTIONS
Check Various Accessories Details of accessories
Please check and ensure the things are in the package. You can contact us for
help if something is not included.
Instructions Before Using Chair of Installation
Please work on a soft floor or put on a soft mat on the floor to avoid
damaging the floor.
-
Place the chair base upside down. Insert the tip of the part into it and press it down until it is firmly in place. Attention
DO NOT place hands on or near the connecting point of the two parts during assembly. -
Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
-
Install the mechanism and armrests. Attention
DO NOT tighten screws completely until all the screws are fixed in the correct position. -
Place the seat on the gas lift.
-
AlignF&M with the holes of the seat, then tighten the screws.
-
Align F&M with the holes of the back, then tighten the screws.
-
Put M5*8 screws through the holes of P1&L1 and tighten, then put the caps on.,
-
Install CD&Owith M5*8 screws, then put the caps on.
-
Attach the headrest & lumbar pillow.
Frequently Asked Questions:
Q: Why do I hear a creaking sound after using it for a period of time?
– A: The mechanism may not fit the seat base. If you hear a creaking sound, please remove the mechanism and reassemble it. Please ensure all the screws are securely tightened.
NOTE : Assembly is recommended to be car ied out by two people.
Preventing the screws from loosening requires tightening after using a period
of time.
Functions Display
Function introduction
Instructions For Use
** A. Lift up the button on the side of the arm to adjust the arm
height, raise or lower to the desired position.
B.** Lift the handle to recline and release it to any desired position.
Rest on the backrest when resetting back to its normal position, otherwise,
the backrest may rebound rapidly.
C.
1. Pull upward on the lever to achieve height adjustment
2. Push in to lock, and pull out to unlock the tilt of the chair. D.
Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it
clockwise to decrease the angle, and counterclockwise to Increase the angle.
E. Before assembling the footrest, take the rubber rings 0 off Om the
metal poles then put the metal poles Into the holes. Lastly, put the rubber
rings on the metal poles.
This device can play audio through Bluetooth function.
Note
-
The audio cable should be inserted when the receiver is not turned on.
-
The receiver cannot be used when it is charging.
-
Bluetooth Receiver
-
Bluetooth Speakers
-
Recharge Cable
-
Speaker Extension Cable
Note:
- The audio cable should be inserted when the receiver is not turned on.
- The receiver cannot be used when it is charging.
Connecting to smartphones and other devices:
-
Long press the power button for 2 s to turn on the Bluetooth receiver. The LED indicator light flashes red and blue, and the voice prompt says that “the Bluetooth device is ready for pairing.”
-
Activate the Bluetooth function on your phone and search for wireless devices. Pair your phone to “GT RACING”.
-
After successful pairing, the voice will prompt “Pairing completed”.
-
If the connection is broken, you will hear a voice prompt that “the Bluetooth device has been disconnected and the device will be ready to pair again.”
-
If there is no connection, the Bluetooth receiver will automatically turn off after 5 min.
-
After the connection, the blue light will light up. After a period of time, it will enter the energy-saving mode, and only one blue light will be on for a long time. Click the power button to check the remaining battery. ( There are 4 blue lights in total, and one blue light represents 25% battery)
-
Charge the Bluetooth receiver with Type-C charging cable for 90 min, and it will be fully charged. The LED indicator light flashes blue when charging, and 4 blue lights are
always on when fully charged. -
Function used: When connecting the computer/mobile phone music, you can press the power button to realize the pause/play function.
TECHNIQUE SPECIFICATION
Power Input | USB 5V | Working Frequency | 2.402 ~ 2.483ghz |
---|---|---|---|
Output Voltage | 3.8V | Working Time | 16 H |
Battery Capacity | 1000mAh | Wireless Streaming Range Distance | 10~15m |
Charging Time | 90 min | Support Mobile System | Android / iOS |
Dear Customer;
We appreciate your trust in us and value your business.
Please feel free to email us directly should you have immediate feedback or
concerns about your purchase. We’ll reply within 24 hours.
At GT RACING, we’re always working hard to provide higher-quality products and
services for our customers by listening to buyers’ comments and concerns. Our
customers also rely on reviews from insightful people such as yourself to
decide which of our products is right for them. If you have a moment to spare,
please leave us feedback or review. It’s a very quick and easy way for you to
make a difference in how we provide services for customers around the world.
We would really appreciate the help if you have the time, but totally
understand if not. Either way, we look forward to serving you again in the
future.
If you have any further questions, please do not hesitate to contact our
customer service for help.
E-mail:info@gtracingchair.com
www.gtracing.com
Documents / Resources
|
GTRACING Gaming Chair with Footrest
Speakers
[pdf] Instruction Manual
Gaming Chair with Footrest Speakers, Gaming Chair, Footrest Speakers Gaming
Chair, Gaming Chair
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>